AutoCAD Inventor :: Importing Parts Made In Other Software Into 2013?
Jul 24, 2012
In autodesk inventor 2013 is there a file format (for example .igs, stl, solid works format, catia, pro/E format, etc) that when imported into inventor will appear with its detailed history tree? for example if I try to import a solid works part into inventor 2013 will it appear as one block or will it have its history tree showing the original sketch and other features that were used to make it? If all imported parts will appear as blocks in inventor 2013 regardless of there format, does this latest version of the software have tools similar to direct modeling software (such as KeyCreator) that make it easy to make changes to the 3D imported part, without having to completely remake the part in inventor? Are such tools in the inventor fusion 2013 software instead?
View 9 Replies
ADVERTISEMENT
Jan 9, 2012
How do you separate two objects that are considered to be the same body.
I have an car airbox made up of two separate solid objects. How can I separate them? see the attached image for a better understanding of my situation.
View 9 Replies
View Related
Jul 18, 2013
The need for a way to get a rebar schedule made referencing my Inventor parts. Like to know if you can create your concrete walls, slabs, beams etc... and either place rebar in these Inventor files and then create some type of rebar schedule (table?) or something. Or take the concrete walls, slabs, beams etc... and import into another Autodesk product like Revit and have this create the schedules and then export back to Inventor. Is any of this been done or possible? Want Inventor to have the end product.
View 3 Replies
View Related
Oct 31, 2013
How to use different configuration of parts made with iLogoc in assembly? I want to have equal part with different configuration. I have a problem with the equal files.How to use different configuration of an assembly made with iLogic in assembly?
View 4 Replies
View Related
Oct 9, 2013
I'm trying to make a drawing of a assembly, and some of the parts were made in frame generator. When I try to make a section view the parts made in frame generator still show as whole instead of halved. Is there something that I need to toggle or vice versa so that this will not happen anymore?
View 4 Replies
View Related
Sep 3, 2012
I have made a building and would like to do some cam shots while doing a "walk" from room to room. Is this possible with a the cam on point of view angle? have tried it out with showcase but the keyframe animasjon only give me overview shots.
should i go for 3dmax or can i do it with inventor studio/showcase /publisher...
View 2 Replies
View Related
Jan 27, 2012
I am working on a multi body IPT and i would like to use some purchased valves and air cylinders in the design.Is it possible to put them into the IPT. I have downloaded the cad files and converted them to IPTs.
View 4 Replies
View Related
Oct 24, 2011
I am trying to change the materials that are assigned to a STEP file I imported to a different "default" so I can then change a few of the surfaces individually. Is there a way to change the entire part's materials to one material that I select? When I try only one "base" highlights at a time and I can't select the entire part at one time. I am using AutoDesk Inventor 2011 Professional.
View 8 Replies
View Related
Sep 21, 2012
I want to import a component consisting of about 50 different parts into an assembly that is about 300 different parts.
When I "place as component" into the assembly it imports into the assembly fine as a component.
When I make an exploded view I can split the component into seperate parts but when I make an .idw file the parts list just shows the component as one part number.
I would like to the .idw to show all of the parts that are in the component separately.
Is there some kind of expansion menu or do I have to re-make the component in the assembly file?
View 4 Replies
View Related
Aug 27, 2012
I have this odd problem that when i want to do welds on a assembly, the machinng (holes) disappear. So i cannot put welding between a pipe and a hole made in a weldment.!
View 9 Replies
View Related
Jan 4, 2012
in order to streamline some of my duties i wonder if theres a way to have a dynamic block not only that can change it's length and the dimension for that length (easy) but will also add features to the part. For example can one be made that when stretching its length that once it reaches a certain length automatically split into two sections and keep those 2 sections equal? Also can it be made to contain a tag that keeps track of the lengths as well as number of joints between sections multiplied by a constant?
View 1 Replies
View Related
Dec 13, 2013
Luckely 2014 works with service pack 1. Now i have another problem:
on school they have 2013, and i have 2014. But I tried to open a part made in a 2014 version. I think this program is expensive enough that they won't make different part versions .
i can open parts made on 2013
View 2 Replies
View Related
Sep 10, 2013
I was making some pieces in Inventor 2013, and a lot of them had similar bases, so I would just use the derive button when I started a new piece, and just make changes to the old piece. I later saved the files as .stl 's to print them in the 3D printer. when the computer hooked up to the 3D printer brought up the pieces, the parts I had derived from the original were missing.
View 2 Replies
View Related
Jul 9, 2012
Most of my part files contain at least one sketch which is derived from another part file. These derived sketches do not update like they did in our previous versions of Inventor.
If you change the geometry on a sketch in the base component, the updates will flow through to the derived parts. If you add geometry, it also works. However, if you delete any geometry from the sketch in the base part, it will not be deleted in the derived sketches in the second, third, etc. parts. The 'deleted' sketch geometry remains in those parts until you go into all the parts which derive from the base part and manually delete it. This is a significant problem for for our workflow.
Is there an option I have missed that changes this behavior so that deleted geometry in a sketch will also be deleted in any derived sketches in other parts?
View 6 Replies
View Related
Jul 12, 2012
I double click to update my parts list, when I select apply or ok, the updates do not happen.
I have to close Inventor and re-open to see the changes.
Windows 7 64-bit
Autodesk Design Suite Premium 2013
View 5 Replies
View Related
May 30, 2012
I have issues when importing Pro Engineer files in Inventor 2013. Importing the same models in Inventor 2012 works fine.
View 9 Replies
View Related
Nov 27, 2012
How is it possible to have a part in an assembly and then remove it when it is not required?
I have a Skeletal assembly of a cabinet with hinges on the left hand side when facing the front. When a customer requires the hinges to be on the right hand side, I need to make the lock keep disappear from the Right hand side panel sub-assembly and make it appear in the Left hand panel sub-assembly.
At the moment, I have the lock keep, the BOM structure in the file is Normal, this is overidden in the assembly to being Reference for the first instance, the lock keep is fully constrained in both sub assemblies and both are in an array of only 1. I increase the value of the array from 1 to 2 and by a distance of zero(0), the newly added part would have a BOM structure of Normal, consequently it would then appear on the BOM. This method was something I last used when using IV2009, it was a method I used to control both visibility of parts in assembly drawings and on BOMs.
I'm now using 2013 and arraying a part with a overidden BOM structure of Reference makes the new part a reference part aswell even though the file itself is BOM structure of Normal.
View 5 Replies
View Related
Aug 10, 2012
I have a drawing with views and I made a parts list from the main view to be structured. Is there a way to create another parts list with different options or delete it and create a different one? If I do delete it and create a new one the options are greyed out. Is there a way to delete this or change it?
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 3 Replies
View Related
Oct 30, 2007
I have a rather lenghty action that was made for me in photoshop cs2. we just upgraded to cs3. is there any way to import this action from cs2 into cs3? or does it have to be re-written?
View 1 Replies
View Related
Jun 25, 2013
When I use the import excel points function in the 2D sketch menu of Inventor 2013, nothing happens when I open the excel file. No points are drawn in the sketch... I don't even get an error message... I have tried the same thing on another computer with the exact same spreadsheet and it works 100%.
I'm running Inventor 2013 service pack 2 on a Lenovo Y570 with an Nvidia GeForce GT555M GFX card
View 2 Replies
View Related
Apr 15, 2013
Is there any other way to import MDT 2005 models to Inventor 2013 with having MDT 2005 platform loaded.
If not, where might I find MDT 2005. I have looked everywhere and it seems to be non existant. It would be alot faster than rebuilding anew in inventor and engineers hate to redo something alredy done correctly.
View 1 Replies
View Related
Jun 7, 2012
So there seems to be a problem with the multi body part functions in 2013.
Once you create a multi body, or a multi body feature, and then try to go back and edit it you can no longer select difference bodies.
A little more digging and it almost seems like the problem is that you can not use "ctrl" to multi select bodies.
Inventor Pro 2014 SP1
Vault Pro 2014
Windows 7 x64
2.53 Xeon
Quadro FX 3800
24GB RAM
View 4 Replies
View Related
Feb 28, 2013
I am having trouble with mass prop exporting to sheemetal parts. It did work for 2012 now its not happening iv2013. service pak 1.1
View 1 Replies
View Related
May 8, 2013
I have recently upgraded to 2013 FDS and now when I try to import Acad files (sometimes up to 2000 solids) it takes virtually a full day to import one file. When I had 2011 I could import these files much faster.
View 1 Replies
View Related
Jun 10, 2012
I had resized the File>Open dialog in Inventor. I had resized it so that it was quite large so I realized pretty quickly when I opened another file, that the window size had rest to its original size.
What I found was that if I export a parts list to excel, then go to File>Open, for some reason the size of my file>open dialog is cleared.
View 4 Replies
View Related
Dec 1, 2012
Is there plugin to AutoCAD to more comfortable creating furniture made of laminated chipboard? Or is there another Autodesk product exists for this purpose.
View 2 Replies
View Related
Apr 26, 2012
I created and replaced a dwt in 2013. tried opening it in 2012 and it crashes with a "fatal error: unhandled access violation writing 0xec307ff8 exception at ec307ff8h". I restored to whole folder with our dwts to before I created them. and still crashes with 2012. they open fine in 2013.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 2 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
May 2, 2013
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
View 4 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
