AutoCAD 2010 :: Rtext Expression For Referencing Tab Layouts?
Aug 31, 2012
I know I can use the expresion "$(getvar,ctab)" to reference the current layout tab name but is there a way to reference say the layout in previous or next tab in reference to the current tab. I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 I would like to automate this so the PP01 of PP02 is referencing the previous or next tab.
View 3 Replies
ADVERTISEMENT
Nov 8, 2012
This happens on more than one document. A ueser showed me when she references in place, you just see the cursor spinning in a circle. Internet is NOT open, just Outlook.
View 4 Replies
View Related
Jul 16, 2012
When I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
View 4 Replies
View Related
Jun 7, 2012
I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
View 5 Replies
View Related
Jun 10, 2011
When I try and import layouts as sheets, the "Prefix sheet titles with file name" is subdued. (AutoCAD MEP 2012)
View 3 Replies
View Related
Sep 14, 2012
DView commands. We're using layout drawings of sites that are aligned with True North.
We've been using DView to rotate site layouts within model space in order to to align the layout better within the window and set up icons as such. And we have multiple Sheets set up with different information being displayed (ie different layers turned off). But when we go to the sheets, the Paper Space view still shows it's Original Orientation.
What I'd like to know is there a simple way to set the various different layouts to the same as Model Space, Without having to manually DView each Viewport as well?
View 2 Replies
View Related
Jan 4, 2013
I am trying to organize my drawing in model into different viewports for printing purposes. However, in Layout # 1, once I delete an item it also deletes the item in model space. In Layout # 2, can't edit, select, highlight or anything ( I am in Layer 0). How can I fix that ? Basically, I want to create several layouts, each layout will contain a certain section of my drawing in model space then. I am not "layout savvy", trying to get hang of it.
View 2 Replies
View Related
Oct 26, 2012
How to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
View 2 Replies
View Related
Feb 19, 2013
when I publish multiple layouts to a single pdf. When I publish all the files at one time the right side of the drawing where the title block is cut off about an inch and does not show the complete title block. Publishing to a printer as a multiple batch or publishing the layouts one at a time to pdf does not exhibit this problem.
View 2 Replies
View Related
Jun 15, 2013
Is there an LISP file that can zoom extends all layouts?
View 1 Replies
View Related
Jun 21, 2013
I am looking at streamlining page layout configuration. When I say this, I mean that I want there to be a button, a small msg to type into command line, or any general quick shortcut, to create a new Layout based on a specific template layout that is located on my server. There will be multiple template layouts that the user has the option to choose from when creating a new one, with each layout contianing an xref title block, and a particular size . Also, I would like these to avaiable everytime I open autoCAD, regardless of the current drawing being worked on.
I've looked at Macros and Sheet Sets, but I was wondering if there was an optium way to do something like this? I realize its a failry begginger problem but I am still a begginer at autocad.
View 2 Replies
View Related
Feb 27, 2013
Can i link several text fields to different layouts in the same DWG? I need to change the same information into several layouts, and it`s taking me too much time to do that.
eg: if i have a field "Smith" in Layout 1, 2, 3, 4 (linked between them) and i want to change from Smith to Johnson , if i change it in Layout 1, it will automatically change it in all Layouts.
View 2 Replies
View Related
Nov 26, 2013
Multiple layouts in model space suddenly stopped showing boundaries.
View 1 Replies
View Related
Aug 8, 2013
Lisp that can create layouts (using a dwt--I would code in the file path to my dwt) reading data from a csv file??? I would create the drawings ahead of time, all I would need is to run the lisp and it would create all the layouts in those dwgs and name them according to the csv.
The csv file contains the drawing names in column A and the layout names in column B. So, what I want to do is create "n" number of layouts in specific dwgs, using the cell data it reads from column A--which are the drawing names, and then rename all those layouts with the cell data from B--note it would not create duplicate (existing) tabs. This way I can re-run it later to add new layouts to the drawings as needed.
The reason is that I work on projects with several hundred layouts--thus the need to create layouts more easily across as many drawings as necessary. Instead of renaming/deleting a ton of layouts; it would be easier to start with a minimal template(s) and have the lisp create the exact number of layouts we need instead of going back and making a ton of edits. Since the csv is created at the beginning of the project, any changes later (adding layouts), can easily be done by running the lisp again.
View 7 Replies
View Related
Mar 23, 2012
I'm trying to print out a Layout in Autocad 2012 but the edges of cylinders either go faint or disappear completely.
This happens when using both PDF and normal printers. If I look at the layout in Print Preview all the lines are there in full. Attached is the result of a PDF print.
View 3 Replies
View Related
Oct 17, 2012
When I work in large files (10,000 kb +) I experience significant delays when copying large amounts of information (copy a floor plan) or when switching between layouts or saving the dwg. I wish I could tell you it started right after I But I just recently started working with the larger files. So this could have been an issue from the time I bough the machine - 18 months ago.
it's either an issue with my graphics card or processor. I would like others to comment on their opinions on adjust my set-up to be more efficient
I believe I have the most current driver for the video card. Did I hear right somewhere that there is no good driver for the Quadro 4000 to work with 2012?
View 6 Replies
View Related
Dec 6, 2013
i have a test drawing attached with layout 1 and layout 2.
from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.
this sample i attached has a xref binded. which result is the same 3 and 8 seconds respectively.
you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.
i did my research and haven't find the difference in variables between the two paperspace layouts.
tried all the variables made no difference:
psltscale, msltscale, celtscale, savefidelity, etc.
also set both viewoprts to undefined same thing.
the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.
is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 9 Replies
View Related
Apr 24, 2013
I am attempting to draw a cable tray layout in Autocad 2010. I am very much new to Autocad.
Basically, i want to draw a cable tray on pedestals which are arranged in a rectangular area. Now, I can draw bends so that the tray stay on pedestals but my question is how to draw the tray that is equidistant from both the corners of the pedestal? There are 6 pedestals arranged in a rectangular manner. All the pedestals are of equal length and width.
View 2 Replies
View Related
May 11, 2012
I would like VBA to convert all layouts in drawing to single .PDF file.
Now I can convert it to PDF file with separate PDF files, but not know process to convert to a Single PDF file with all .DWG layouts.
View 1 Replies
View Related
May 29, 2012
Our office has upgraded to new Windows 7 computers with AutoCAD 2013.
For the last (3) years, we have had an RTEXT in our titleblock file that shows the path, file name, date, and time. This RTEXT thingy was originally copied from a consultants file to ours. The titleblock file is x-reffed to the other sheet files, and has been working fine in all files until the upgrade.
Now, when we open a file, the only thing that is shown for the RTEXT is the bounding box. This happens on all of our computers. The express tools are installed. If I type RTEXT > [enter], it displays correctly and will work fine ... until the CAD is shut down. If it is re-opened, once again, just the bounding box.
Typing the command every time I open the file is a nuisance for me, and is something that others in the office would never get used to doing.
View 9 Replies
View Related
Oct 4, 2012
I have (unfortunately) the necessity to modify into some files (which are used as models) the print style preset.
These files, which are necessary for the realization of electrical diagrams, have inside hundreds of layout.
Each layout set default printing parameters, so as "Laser b/n.pc3," as the paper size "A4" scale "Scale to Fit", and plot style "Schemi.ctb", etc. ..
Is there a way to create a macro (a field unknown to me) or something similar, to automatically change in all the default layout, for example, the printer "Colori.pc3" and the print style in "Schemi_colori.ctb "?
View 5 Replies
View Related
Dec 30, 2004
We use an in-house plotstamp (not the acad plotstamp) which uses rtext to show the file path and name. It works fine under all circumstances EXCEPT when we plot using the Publish command. The output from Publish shows the file path as the C:Documents and Settings... where the acad2005 software is installed instead of the correct network drive path where the dwg files are located.
Is there a secret setting somewhere that will keep Publish from changing the rtext? If we switch from rtext to fields, would that eliminate the problem?
View 2 Replies
View Related
Nov 6, 2013
Why is the Rtext link in the title block not working for my team members in canada? They are using the same TB as us but for some reason the plot/date stamp shows like the attached pictures
View 9 Replies
View Related
Jun 12, 2012
Why RTEXT does not work in AutoCAD r2013?
The below RTEXT string is insert into the drawing and it now longer works in release 2013.
$(GETVAR, "DWGPREFIX")$(GETVAR, "DWGNAME")$(EDTIME, 0, MON DD"," YYYY - H:MMam/pm)
View 9 Replies
View Related
Feb 23, 2012
Is there a way to turn off all section tags for drawings refering to all Sketch Layouts in all the Construction Document Layouts?
View 4 Replies
View Related
Dec 6, 2013
Any way of creating a block attribute that will reference the z value of a separate 3d model (topographical survey) at a given point?
I know the z value of the block itself can be listed as a simple block attribute but I need the reference to check for the z value of an unlinked model which will be inserted/ x-reffed beneath the block.
View 3 Replies
View Related
Jan 18, 2013
I have a rather complex assembly that I didn't draft but I am trying to work with. Most of my experience is with Solidworks. I'm trying to create a hole in a plate that lines up with a hole in a different part in the same assembly. I know there is probably a way to create the hole in the assembly and reference the other part but I dont know how.
Autodesk Inventor 2009
View 2 Replies
View Related
May 1, 2013
I have a master assembly containing three sub-assemblies 1, 2 & 3.I require 3 Drawings from this master assembly.
Drawing 1 showing master assembly, sub-assemblies 1 in full and 2 & 3 in reference.
Drawing 2 showing master assembly, sub-assemblies 2 in full and 1 & 3 in reference.
Drawing 3 showing master assembly, sub-assemblies 3 in full and 1 & 2 in reference.
This sounds so simple but is it possible?We have tried all manner of configurations with LOD.I'm not really keen on locking design views as the assemblies can change at any time.
View 9 Replies
View Related
Apr 9, 2013
I am trying to insert a text field into a block attribute and setting that field to display the information of an attribute in another block. What happens is that when I close the file and re-open it the text field loses its connection to the attribute that it is referencing.
Now, I have been able to make this work in the passed, however the difference now is that I am asking the text field to reference an attribute of an annotative block. That appears to be the reason it does not work.
How to make this work with annotative blocks? Is it a system variable I can change?
View 5 Replies
View Related
Aug 14, 2012
I have an Map that was drawn in regular autoCAD drawn 1:1. I know the coordinate system that I need to assign to it and some known coordinate but how to I go about getting my current map to be correctly Geo-referenced.
Is there a way to tell AutoCAD map that a certain few points are at certain coordinates, and the rest falls into place?
View 4 Replies
View Related
Oct 8, 2013
Is there anyway to reference a form and its specific items in iLogic. For example, say I wanted to change a label on the form when the code ran. How would I do something like this?
Form1.Label1.Value = "SomeString" ?
View 2 Replies
View Related
