When I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
Can i link several text fields to different layouts in the same DWG? I need to change the same information into several layouts, and it`s taking me too much time to do that.
eg: if i have a field "Smith" in Layout 1, 2, 3, 4 (linked between them) and i want to change from Smith to Johnson , if i change it in Layout 1, it will automatically change it in all Layouts.
in order to avoid opening each layout and update the fields or the same text written in Title Block
- is there a way to update automatically the fields (date for example) in all the layouts with a single command.
- is there a way to update the same text in all the layouts (for example changing the adress or the name of the project written in the title block - like in word with search and replace function)
In the attached file, I have a piece of MText with a series of fields, one of which the date and time updates each time you REGEN.
However, I cannot create a date and time field that updates during a REGEN.
In the attached file, you will see the one that updates (along with a screenshot of the field variables I used), as well as other examples where a date and time field will NOT update (along with a different screen shot)
1. Why this one particular date field will update each time I REGEN
2. Why I CANNOT create a new date field value to update each time I regen
I tried different date field values, but I simply cannnot create a new field that updates with a regen.
I have a project where 60 drawings will be duplicated for each of a dozen sites. Each site has a four digit prefix (i.e. 800X) that is added to the drawing number, equipment callouts, leaders and various notes throughout the sheets. Even using Find/Replace, this is a lot of work to revise every time I copy them, so I’m thinking that this is a job for fields, no?
Well, I had no problem making a “global” field called SiteNo and inserting it into the title block. Then I inserted the same field into a couple of references in the general notes as well, where it works fine. But when I put it into several leaders sprinkled throughout the drawing I found a problem: regen or regen all will update the title block and note references (all in paperspace, of course), but not the ones in model space. I’ve tried putting the field in both mtext and dtext, and I’ve checked to be sure FIELDEVAL is set to 31. Nothing makes fields in modelspace update.
But I know that the field is set up correctly. If I doubleclick any modelspace occurance (text or mleader), then right click and choose “update field”, it fills in the right value. This however negates my goal. If I have to select each one, I might as well put it in as text and use FIND/REPLACE on each individual drawing.
I was REALLY hoping that I could go to the properties of the sheet set, change one box, and see all occurrences in all drawings for that site update, which is my understanding of the purpose and power of fields. I've spent a lot of time searching the web, seen a lot of issues and solutions, but nothing that quite hits my problem.
When we plot full packages for construction documents, we have to provide plot numbers for each sheet to the printing room. This is a completely different number then the sheet number itself....the plot number is basically the actual sheet number within the entire construction document. So if there's 245 sheets in the entire construction document and landscape sheets need to start at 188, is there a way to set up a field that knows how to number accordingly?
I have a call out block that I am trying to link to my custom fields in my sheet set manager. When I put the block into paper space the fields fill in properly and if I make changes to the field in the SSM then the block updates properly. If I insert the block into model space the fields come in as if they are broken and you cannot reference the data in the SSM. The issue is that I don't want to do my annotation in paperspace, so is there a way to change the interaction between my block with the custom fields and the SSM.
I was wondering if it was possible to say have a cover sheet of a project with fields and then have the other sheets in the project have their fields populate using information from cover sheet?
Is there a system variable or some other method to change the background color when using fields? It makes reading text very difficult. I realize I can turn off background for fields, but I don't want to do that. I want to change the background to a darker grey so one still knows it's a field but easier to read.
I have a sheet set that i have been adding sheets to for a couple weeks and inserting fields to reference page numbers and titles. I installed service pak2 today and now all of a sudden I am not able to insert fields. I get an AutoCAD warning that says " there are no registered modules to edit fields or demand loading is currently disabled. I have not changed a single setting other then loading service pak. This sheet set is over a 150pgs right now.
I have a ss that I am using & wish to generate a drawing index sheet. I can manually update the fields in the drawing index table on the index drawing, but I would like to have this automatically work for every sheet set I generate.Would I need to use hyperlinking fields for this to work?
Autodesk Plant 3D Premium 2012 Autodesk MEP 2012 HP 3.2 Ghz CPU 16 ram 1TB 7200 rpm SATA 3Gb/s hard drive 2GB DDR3 NVIDIA GeForce GT 530 HP 2311x 23" LED Monitor
We are a MEP firm, using AutoCAD 2011 and Excel 2007, and our project is a building with 1000+ rooms. Each room has specified supply and return airflows that need to show up in text in each of the rooms. All the airflow values are calculated in a spreadsheet.
My thought is to use fields in the text that shows up in each room, then link each field to a specific cell in Excel, because these values will be evolving over the next year.
It been a while since I did this and I getting something wrong. I want to add custom SS field to my TB which I have created in SSM, but when I edit the block to add the custom field to an attribute default the list is empty.
Civil 3D 2012 & 2013 HP Z210 Workstation Intel Xeon CPU E31240 @ 3.30 Hz 12 GB Ram
I have been trying to figure out how to copy a Layout from one DWG to another. I know there are several threads about this, and I have tried the methods they reccomend, but I am having an unusual problem.
I have been trying to open a Layout by using the "from Template" option for creating a new Layout, then opening the DWG containing the desired Layout. It works, but everything drawn in model space ends up compressed into the lower left corner and there is nothing in model space. So, the paper space information from the Layout is being imported, but the drawing info is getting mixed up somehow.
I have tried using the Design Center with identical results.
DView commands. We're using layout drawings of sites that are aligned with True North.
We've been using DView to rotate site layouts within model space in order to to align the layout better within the window and set up icons as such. And we have multiple Sheets set up with different information being displayed (ie different layers turned off). But when we go to the sheets, the Paper Space view still shows it's Original Orientation.
What I'd like to know is there a simple way to set the various different layouts to the same as Model Space, Without having to manually DView each Viewport as well?
I am trying to organize my drawing in model into different viewports for printing purposes. However, in Layout # 1, once I delete an item it also deletes the item in model space. In Layout # 2, can't edit, select, highlight or anything ( I am in Layer 0). How can I fix that ? Basically, I want to create several layouts, each layout will contain a certain section of my drawing in model space then. I am not "layout savvy", trying to get hang of it.
How to use Autodesk's DWG to PDF driver to plot multiple through publish? Whenever I try to plot more than one layout at a time I get a driver not found error.
when I publish multiple layouts to a single pdf. When I publish all the files at one time the right side of the drawing where the title block is cut off about an inch and does not show the complete title block. Publishing to a printer as a multiple batch or publishing the layouts one at a time to pdf does not exhibit this problem.
I am looking at streamlining page layout configuration. When I say this, I mean that I want there to be a button, a small msg to type into command line, or any general quick shortcut, to create a new Layout based on a specific template layout that is located on my server. There will be multiple template layouts that the user has the option to choose from when creating a new one, with each layout contianing an xref title block, and a particular size . Also, I would like these to avaiable everytime I open autoCAD, regardless of the current drawing being worked on.
I've looked at Macros and Sheet Sets, but I was wondering if there was an optium way to do something like this? I realize its a failry begginger problem but I am still a begginer at autocad.
I'm trying to edit our titleblocks. There is information we repeat at the top of the drawing like the drawing name, sheet number, total number of sheets, contract number, etc. It is ridiculous to have to type this information in twice. I tried creating both text and constant attributes at the top and insert field pointing to attributes at the bottom but all I get is ---- when inserted. My inserted field was ->Object->(selected attribute)->Value. I am using version 2011. I would think it should be easy to "repeat" values of attributes inside a block.
I know I can use the expresion "$(getvar,ctab)" to reference the current layout tab name but is there a way to reference say the layout in previous or next tab in reference to the current tab. I am doing some plan and profile drawings which contain match lines I would like to have the match line text automated. For example if I'm on layout called PP02 there would be two match lines in the drawing one would read MATCH LINE PP01 and the other would read MATCH LINE PP03 I would like to automate this so the PP01 of PP02 is referencing the previous or next tab.
Lisp that can create layouts (using a dwt--I would code in the file path to my dwt) reading data from a csv file??? I would create the drawings ahead of time, all I would need is to run the lisp and it would create all the layouts in those dwgs and name them according to the csv.
The csv file contains the drawing names in column A and the layout names in column B. So, what I want to do is create "n" number of layouts in specific dwgs, using the cell data it reads from column A--which are the drawing names, and then rename all those layouts with the cell data from B--note it would not create duplicate (existing) tabs. This way I can re-run it later to add new layouts to the drawings as needed.
The reason is that I work on projects with several hundred layouts--thus the need to create layouts more easily across as many drawings as necessary. Instead of renaming/deleting a ton of layouts; it would be easier to start with a minimal template(s) and have the lisp create the exact number of layouts we need instead of going back and making a ton of edits. Since the csv is created at the beginning of the project, any changes later (adding layouts), can easily be done by running the lisp again.
I'm trying to print out a Layout in Autocad 2012 but the edges of cylinders either go faint or disappear completely.
This happens when using both PDF and normal printers. If I look at the layout in Print Preview all the lines are there in full. Attached is the result of a PDF print.
When I work in large files (10,000 kb +) I experience significant delays when copying large amounts of information (copy a floor plan) or when switching between layouts or saving the dwg. I wish I could tell you it started right after I But I just recently started working with the larger files. So this could have been an issue from the time I bough the machine - 18 months ago.
it's either an issue with my graphics card or processor. I would like others to comment on their opinions on adjust my set-up to be more efficient
I believe I have the most current driver for the video card. Did I hear right somewhere that there is no good driver for the Quadro 4000 to work with 2012?
i have a test drawing attached with layout 1 and layout 2.
from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.
this sample i attached has a xref binded. which result is the same 3 and 8 seconds respectively.
you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.
i did my research and haven't find the difference in variables between the two paperspace layouts.
tried all the variables made no difference:
psltscale, msltscale, celtscale, savefidelity, etc.
also set both viewoprts to undefined same thing.
the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.
is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.
Civil 3D 2012 Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2 Home: 3930k, 12GB, GTX 590, U3011, QX2710
I am attempting to draw a cable tray layout in Autocad 2010. I am very much new to Autocad.
Basically, i want to draw a cable tray on pedestals which are arranged in a rectangular area. Now, I can draw bends so that the tray stay on pedestals but my question is how to draw the tray that is equidistant from both the corners of the pedestal? There are 6 pedestals arranged in a rectangular manner. All the pedestals are of equal length and width.
