AutoCAD 2010 :: There Are No Registered Modules To Edit Fields
Apr 16, 2013
I have a sheet set that i have been adding sheets to for a couple weeks and inserting fields to reference page numbers and titles. I installed service pak2 today and now all of a sudden I am not able to insert fields. I get an AutoCAD warning that says " there are no registered modules to edit fields or demand loading is currently disabled. I have not changed a single setting other then loading service pak. This sheet set is over a 150pgs right now.
View 1 Replies
ADVERTISEMENT
Feb 16, 2012
Currently I have to open dwg file each time I need to change the stall number or name. I use Fields so I only need to edit 1 field per file.
This becomes an issue as I have excel files linked, and I have to re-link them all after changing the stall numbers.
Multiply this by 20-30+++ files, and I have a big headache.
Is there an easier way to edit the Fields for ALL files and to update the links to renamed excel files?
View 1 Replies
View Related
Oct 26, 2006
IV11 SP2, Vaulted project.
I have several drawing templates that have prompted entry field text in the border and bring some model properties in the block. Problem is, if any change in the model properties occurs, this dialog box pops up EVERY TIME I return to the drawing, when changes in the model properties have nothing to do with the border. I have just checked and IV10 SP3a does not suffer from this behaviour. For me, this is an unnecessary dialog that pops up without being required to do so, and is time consuming - it takes extra mouse/keyboard clicks to dismiss and up to 10 seconds for it to close after being dismissed.
Is there an option to turn this off? (I've checked the Options >> Prompts tab, but there's nothing there)
View 3 Replies
View Related
Aug 29, 2013
I've been up and down the forums looking for some direction or programming code for this to no avail.
What I'd like to do is edit a table where the cells are populated with fields. I'd like to copy the last row of the table to a new row (fields and all), then change the fields of the row I copied FROM to text, and lock those cells.
I'd like to copy this row including the fields to a new row beneath it. Then edit the cells of the first row to change the fields to text, and then finally lock the cells of the first row so that only the new row would update when the field properties change. Eventually they will be populated with data from the Vault..
View 6 Replies
View Related
Oct 11, 2004
I'm trying to develop a help wanted ad, which can be used by several of our franchises. Would like to know how I can make certain fields within the add able to be edited such as location address and phone number and have it in a PDF format so the format can not be changed or altered. Can someone step me through the process?
View 1 Replies
View Related
Sep 25, 2012
I am using a symbol that includes a several text boxes. Each text box includes "prompted text" and "drawing properties". When I insert the symbol onto a drawing, the "Edit Property Fields" menu appears. In this menu, I can input my prompted field text or see the various "drawing properties".
My question is, how do I change the order that these property fields are displayed? It seems as if it depends on the order that the text boxes were created while defining the symbol definition. Is there any other way to change the display order?
View 3 Replies
View Related
Jul 16, 2012
When I add an object field in paperspace to report on the scale of a viewport in the layout, as I return to that layout and zoom in or out the viewport displays as hot in MS (tab reports as PS) and leaves the MS information of my previous visit embeded on the layouts neutral background and the "new" zoomed MS information is added to modelspace. The background objects cannot be selected or deleted but if I go to the block editor screen -choosing any block for my selection, when I close the block edit and return to the layout, the objects are cleared. I have installed service pack #1 for v12 and I lso have installed V13. I didn't notice this problem prior to the service pack or usin v13. I have an Intel i7 processor, 64 bit.
View 4 Replies
View Related
May 7, 2013
In the attached file, I have a piece of MText with a series of fields, one of which the date and time updates each time you REGEN.
However, I cannot create a date and time field that updates during a REGEN.
In the attached file, you will see the one that updates (along with a screenshot of the field variables I used), as well as other examples where a date and time field will NOT update (along with a different screen shot)
1. Why this one particular date field will update each time I REGEN
2. Why I CANNOT create a new date field value to update each time I regen
I tried different date field values, but I simply cannnot create a new field that updates with a regen.
View 6 Replies
View Related
Nov 21, 2013
I have a project where 60 drawings will be duplicated for each of a dozen sites. Each site has a four digit prefix (i.e. 800X) that is added to the drawing number, equipment callouts, leaders and various notes throughout the sheets. Even using Find/Replace, this is a lot of work to revise every time I copy them, so I’m thinking that this is a job for fields, no?
Well, I had no problem making a “global” field called SiteNo and inserting it into the title block. Then I inserted the same field into a couple of references in the general notes as well, where it works fine. But when I put it into several leaders sprinkled throughout the drawing I found a problem: regen or regen all will update the title block and note references (all in paperspace, of course), but not the ones in model space. I’ve tried putting the field in both mtext and dtext, and I’ve checked to be sure FIELDEVAL is set to 31. Nothing makes fields in modelspace update.
But I know that the field is set up correctly. If I doubleclick any modelspace occurance (text or mleader), then right click and choose “update field”, it fills in the right value. This however negates my goal. If I have to select each one, I might as well put it in as text and use FIND/REPLACE on each individual drawing.
I was REALLY hoping that I could go to the properties of the sheet set, change one box, and see all occurrences in all drawings for that site update, which is my understanding of the purpose and power of fields. I've spent a lot of time searching the web, seen a lot of issues and solutions, but nothing that quite hits my problem.
View 9 Replies
View Related
May 18, 2012
When we plot full packages for construction documents, we have to provide plot numbers for each sheet to the printing room. This is a completely different number then the sheet number itself....the plot number is basically the actual sheet number within the entire construction document. So if there's 245 sheets in the entire construction document and landscape sheets need to start at 188, is there a way to set up a field that knows how to number accordingly?
View 1 Replies
View Related
Feb 8, 2012
I have a call out block that I am trying to link to my custom fields in my sheet set manager. When I put the block into paper space the fields fill in properly and if I make changes to the field in the SSM then the block updates properly. If I insert the block into model space the fields come in as if they are broken and you cannot reference the data in the SSM. The issue is that I don't want to do my annotation in paperspace, so is there a way to change the interaction between my block with the custom fields and the SSM.
View 6 Replies
View Related
Jul 11, 2012
I was wondering if it was possible to say have a cover sheet of a project with fields and then have the other sheets in the project have their fields populate using information from cover sheet?
View 3 Replies
View Related
Apr 22, 2013
Is there a system variable or some other method to change the background color when using fields? It makes reading text very difficult. I realize I can turn off background for fields, but I don't want to do that. I want to change the background to a darker grey so one still knows it's a field but easier to read.
View 9 Replies
View Related
Oct 11, 2012
I've tried (and failed) to create a fake slope label for line.
I've put in what I thought would be the correct formulas for it, i.e. rise/run.
This would mean putting Z1-Z2 / length, all of which you can get from a line.
But the result comes back showing the X, Y and Z coordinates divided by the length, even though I've only ticked the Z values in the co-ordinates.
View 2 Replies
View Related
Feb 27, 2013
Can i link several text fields to different layouts in the same DWG? I need to change the same information into several layouts, and it`s taking me too much time to do that.
eg: if i have a field "Smith" in Layout 1, 2, 3, 4 (linked between them) and i want to change from Smith to Johnson , if i change it in Layout 1, it will automatically change it in all Layouts.
View 2 Replies
View Related
Nov 8, 2012
I have a ss that I am using & wish to generate a drawing index sheet. I can manually update the fields in the drawing index table on the index drawing, but I would like to have this automatically work for every sheet set I generate.Would I need to use hyperlinking fields for this to work?
Autodesk Plant 3D Premium 2012
Autodesk MEP 2012
HP 3.2 Ghz CPU 16 ram
1TB 7200 rpm SATA 3Gb/s hard drive
2GB DDR3 NVIDIA GeForce GT 530
HP 2311x 23" LED Monitor
View 1 Replies
View Related
Oct 10, 2013
We are a MEP firm, using AutoCAD 2011 and Excel 2007, and our project is a building with 1000+ rooms. Each room has specified supply and return airflows that need to show up in text in each of the rooms. All the airflow values are calculated in a spreadsheet.
My thought is to use fields in the text that shows up in each room, then link each field to a specific cell in Excel, because these values will be evolving over the next year.
View 2 Replies
View Related
Aug 22, 2013
It been a while since I did this and I getting something wrong. I want to add custom SS field to my TB which I have created in SSM, but when I edit the block to add the custom field to an attribute default the list is empty.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
View 2 Replies
View Related
Jun 18, 2010
know if there a way to use fields in a table to pull the measurements out of dimensions snapped in a drawing (or layout) and place them in that table.
I create framing drawings and am looking for a quick way to put together a cut list without having to manually type dimensions into a table.
View 4 Replies
View Related
Apr 17, 2013
I'm trying to edit our titleblocks. There is information we repeat at the top of the drawing like the drawing name, sheet number, total number of sheets, contract number, etc. It is ridiculous to have to type this information in twice. I tried creating both text and constant attributes at the top and insert field pointing to attributes at the bottom but all I get is ---- when inserted. My inserted field was ->Object->(selected attribute)->Value. I am using version 2011. I would think it should be easy to "repeat" values of attributes inside a block.
View 5 Replies
View Related
Oct 1, 2013
Is there any way to make print merge fields relative in position to other fields or to non-variable text.
For example if I am doing address labels and I have fields for City and State:
Their positions are absolute, and the state ends up overwriting the city for long city text, as does the comma.
What I want is for the comma to follow the last letter of the city, and then state to follow that.
And yes, I realize that I can combine all three into one field, but I am asking this as a general usage of the feature. One doesn't always have control over the source.
View 3 Replies
View Related
May 2, 2012
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
View 4 Replies
View Related
Jun 8, 2012
I'm getting a "Class Not Registered" message when I try to use the section tool.
(AutoCAD Archtecture 2013)
View 2 Replies
View Related
May 22, 2012
Error Message: "Class Not Registered." appears when opening an assembly.
Generally, the errors appears to stop the model from opening.
View 1 Replies
View Related
Jun 13, 2013
When i attempt to open a dxf file in autocad it comes up with error messages;
Class not registered
View 9 Replies
View Related
Oct 17, 2008
I created a new version of DaylightBench subassembly with a different class library application on .net for c3d 2009.
I added the tool data to C3D Metric Transportation Subassembly Catalog.atc. Tool is listed on Subassembly catalog and i can copy-paste the tool to Tool palette.
But on tool palette when i try to drag it to drawing it gives the error "tool is not registered". error msg is attached.
can it be about the resource fileds on ATC file eg: resource="1302" or the new GUID values?
View 3 Replies
View Related
Dec 6, 2013
AutoCAD MAP loads a some AEC modules when initialising.
I want to send my .NET Init message to the commandline after these AEC loading prompts
I tried waiting for Application.Idle(QuiescentState) without any luck.
View 2 Replies
View Related
Aug 29, 2011
So i have managed to get my VBA apps working up to version 2010 (with the AcFocusCtrl). I just upgraded to AutoCAD 2012. For some reason I cannot get the ACFocusCtrl on my VBA userform. When I try to drag it onto the userform, I get an error "Class Not Registered". how I can load that control?
View 4 Replies
View Related
Sep 8, 2009
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies
View Related
Oct 11, 2011
I am trying to import my MDT 2009 (SP3) files into Inventor 2012 (SP1) but I get the error in the subject line.
View 9 Replies
View Related
Nov 30, 2012
i cannot edit the dimension by right clicking it.. the dim text position, precision, dim style and flip arrow is missing.. im using cad2010..
View 3 Replies
View Related
