So i have managed to get my VBA apps working up to version 2010 (with the AcFocusCtrl). I just upgraded to AutoCAD 2012. For some reason I cannot get the ACFocusCtrl on my VBA userform. When I try to drag it onto the userform, I get an error "Class Not Registered". how I can load that control?
View 4 RepliesError Message: "Class Not Registered." appears when opening an assembly.
Generally, the errors appears to stop the model from opening.
When i attempt to open a dxf file in autocad it comes up with error messages;
Class not registered
Every time I try to run a tool from the tool palette like dragging an AEC block into my drawing I get a pop out window saying: "Unable to execute the tool - Class not registered" why this is happening on Autocad Architecture 2010?
View 9 Replies View RelatedI'm getting a "Class Not Registered" message when I try to use the section tool.
(AutoCAD Archtecture 2013)
I don't do a lot of programming and when I do it is mostly with older lisp commands. I have routine that works in 2010 but we are switching to 2013 and it doesn't work. The routine assigns the area of a polyline to a field. The portion of the routine that isn't working is where it assigns the object id for the polyline. Here is that portion of the routine:
;; select an object
(if (setq ent (entsel))
(progn
(setq ent (car ent))
;; Check to see if object selected is a polyline
(if (= (cdr (assoc 0 (entget ent))) "LWPOLYLINE")
(progn
;; obtain the object id from the selected entity
(setq objID (vla-get-objectid (vlax-ename->vla-object ent)))
i am trying to select a dynamic block by its name but it does not work
(setq WW (ssget "x" (list (cons 2 "WET WELL"))))
In AutoCAD 2011 in mapclassic mode I removed some buttons that I don't use from the Modify toolbar and now the copy command doesn't work. I can't even type in the command line.
View 1 Replies View RelatedI have loaded a simple lisp in my startup suite which refuses to load.
I have to reload each time.
Other lisp files in my startup suite work fine and I do not have to reload each time.
We have a lisp routine that I co-authored ages ago and then haven't done much programming in about 7 years. I seem to have forgotten much of my language skills. This portion of the lisp routine was running fine in autocad 2005 which is what the computer had on it, and it doesn't run on autocad 2010.
I've narrowed it down to the while statement which is why you see it commented out, but that portion is necessary. My main question is was there a change in the language specifically the while statement between 2005 and 2010?
; GET LINES OVER 10" AND THROW OUT (if (= (cdr(assoc 0 outerinfo)) "LWPOLYLINE") (progn (setq remlenouter 0.0) (setq numseg (cdr(assoc 90 outerinfo))) (setq edd (member(assoc 10 outerinfo) outerinfo)) (setq n1 0) ;(while (< n1 (- (* numseg 4) 4)) ;(setq dist (distance (cdr(nth n1 edd)) (cdr(nth (+ n1 4) edd)))) ;(if (>= dist edmmax) (setq remlenouter (+ remlenouter dist))) ;(setq n1 (+ n1 4)) ;) ; end while (setq dist (distance (cdr(nth n1 edd)) (cdr(nth 0 edd)))) (if (>= dist edmmax) (setq remlenouter (+ remlenouter dist))) ) ; end progn ) ; END IF
So i have almost 30 installs and my custom programs are working in all but this new install. Now when i pick on the tool palette that runs the program, i get a message shown in the attached png, then when i pick "OK" i get "Unable to load dialog box."
I've searched these hallowed halls but all the messages seem to point to 2002 versions of ACAD Map and i'm running plain AutoACAD (that came with Product Design Suite, aka Inventor.)
I have made a block with consist of shape drawing and some attribute data that must specified when the block inserted. my question is, how to make "warning error input" appear if mistake input occurs?
View 6 Replies View RelatedIn my acaddoc.lsp I have it load an autoload.lsp file that contains many lisp routines (attached). I am getting the "extra right paren on input" error. It appears to error after the third line in the autoload file "san18"....I removed everything after the third line and no error, I put them back and it errors and only loads first three?
I am using Civil 3D 2014 and I have added all neccesary paths to the trusted locations.
The error below has appeared randomly when AutoCAD 2011 is started. There was not an error of this sort, but it suddenly appeared and some of the LISP routines will no longer work.
*Invalid attempt to access
a compiled function definition. You may want to define it using defun-q:
#<SUBR @000000003f5fda98 S:: STARTUP>
just test my code about create a stair 3D,still running the program and then appeared a display box,with said "Error analyzing internal islands",what meaning it said?.at attach file with "Error Analysing-1.jpg is the result that program.
View 1 Replies View RelatedI D/L a lisp file (setvars.lsp) that purports to give a list of system variables that match a short string entered in a dialog box.
Unfortunately, an error arises that says 'error : no function definition: STRNUM'
I've looked at the code and can't tell what the writer was hoping to achieve.
The specific section is as follows:
(if F1
(progn
(setq RL (read-line F1))
(while RL
(if (and (wcmatch (strcase RL) (strcase (strcat "*" DESCR1 "*")))
(wcmatch (strcase RL) (strcase (strcat "*" DESCR2 "*")))
[Code] .........
There is no other mention of STRNUM in the whole of the lisp.
There is an accompanying setvars.dat, wherein apparently, the writer compiled a data file of all the system variables in AutoCAD2008, each variable being followed by an '=' and then a description of the variable.
If necessary I can post the whole lisp and dat file, but was hoping to discover the intention from the above extract and therfore where I might work out an alternative to this line.
Looking to turn a string to a real? If so, why are there two 'arguments' following the 'function' STRNUM?
I have created a very basic reactor as a test. As you can see, it doesn't actually do anything other than set a variable so I know the error isn't caused by something I'm doing with the reactor.
(defun np:test (reactor callbackdata / ) (setq abc 123))(if (not np:reactor1) (setq np:reactor1 (vlr-command-reactor nil '((:vlr-commandwillstart . np:test))) ))
OK, so the problem I have found is that if I load this reactor into a drawing and then use the MVSETUP command but escape out without completing the command, AutoCAD throws an error and becomes unusable. When I then close AutoCAD down I am met with multiple unhandled exception errors before the app finally closes.
I then altered the reactor from a vlr-command-reactor to a vlr-editor-reactor and found that with this, I am no longer met with the same error while escaping out of MVSETUP. However, when I close CAD down I am eventually left with an 'AutoCAD Application has stopped working' error dialog on screen which reports that acad.exe as crashed.
I am working on AutoCAD Architecture 2012 (although I have tried it on 2013 to with the same results) on Windows 7 64bit. I have also tried this on ACA2012 x32 and found the same error exists.
I am doing something fundamentally wrong in the way I am handling reactors?
I have a problem with "tools/window attributes/configure current"when I try to configure current window (especialy tabulator spaces 8 -> 2) I got fatal error: unhandled access violation Writing 0x0000 Exception at cc424946h
Windows 7 (x64)
AutoCAD 2009, 2010, 2011, 2012
standalone instalation
user with administrator privileges
My code returns the error, but it still works.
(vl-load-com)
(setvar "cmdecho" 0)
(vlax-for ucs (vla-get-UserCoordinateSystems (vla-get-Activedocument (vlax-get-acad-object)))
(setq UCSList (cons (vla-get-Name ucs) UCSList)))
(setq FileName (vl-Filename-Base (getvar "Dwgname")))
(setq NewUCSList (vl-remove-if '(lambda (x) (vl-string-search FileName x)) UCSList))
(setq Listlength (length NewUCSList))
[code]....
I've been using X3 for about 5 years.Today, I can't open the program.... a message appears
"Unable to create a DOM document.Class not registered Verify that MSXML4 is installed."
I have no idea what this message means. I uninstalled the program and reinstalled, rebooted and still the same message comes up. I use this program almost everyday, so, of course, now I'm unable to produce art for clients.
My PC is Dell Studio XPS 8100, 64 bit and Windows 7.
I am trying to customize my quick properties (acad.cuix), but i keep on receiving fatal error message. And when i click on quick properties it is all blank. Also, the Properties dialogue box is not working when i click on something, the properties do not appear on the Properties dialogue box. Attached is the error message.
View 3 Replies View RelatedBy running this routine it returns the following error message:
ERROR: bad argument type: VLA-OBJECT 7
(defun _make_tblstyle (stlname / adoc acmcol tblstyle txh)
(setq adoc (vla-get-activedocument
(vlax-get-acad-object))
)
(setq acmcol (vla-getinterfaceobject
[Code] .......
I've got a subroutine that gets the centroid of a closed polygon (lwpoly). It appears to fail if the polygon has any zero length line segments. I've added a trap that catches the error and "highlights" the offending polygon, but it stops there and does not return to the main function that called the subroutine. Is there a way to get back to the main function from the trap?
Here's the subroutine (original function by _gile (Autodesk LISP Forum 9-18-2006):
(defun return-centroid (lwpoly space / obj Region Centroid)
(setq *error* trap1)
(setq obj (vlax-ename->vla-object lwpoly))
(setq Region (vlax-invoke space 'addRegion (list obj)))
(setq Centroid (trans (vlax-get (car Region) 'Centroid) 1 0))
(vla-delete (car Region))
[code]....
Is there a lisp that will allow me to do a continuous dimension, but will alternate the dimension position from low, high, low and high? If there is no lisp already created, how to create one?
See Continuous dimension attachment for example.
I work at a glass and glazing company and this is how we dimension mullion width and DLO. See typical window dimensioning attachment for window elevation with dimensions.
I have a list ("temp.dwg" "temp2.dwg") and would like to add the string "insert text here" into each item in the list resulting in ("insert text heretemp.dwg" "insert textheretemp2.dwg"). how would i go about doing that using LISP?
View 2 Replies View RelatedIs there a way to programatically set a visual style before a drawing actually opens?
We have some huge models and people seem to forget to change their visual styles back to 2D wireframe before saving and exiting drawings. Some models will crash on some workstations when trying to open in a rendered mode.
I found a lisp with a function that looked to set viewport visual styles. But it does not seem to be supported anymore. --> (vla-put-VisualStyle vport 1)
I'm trying to write a lisp routine that, when I invoke the mleader command, osmode is set to "nearest" & orthomode is set off. I then would like the original settings to be returned.
attached is what I have written so far:-
Lisp that switches back on Selection Preview i.e. thickens and highlights lines when you hover over them?I don't know why, but they are always unticking the boxes.
View 4 Replies View RelatedIs it possible to execute a certain command based on multiple selections withinin a dcl? for example: two radio colums, one with selections A and B, and a second with selections 1 and 2. is it possible to program commands based on user selections from each column? ex: if A and 1- do a command. A 2- do a different command, etc...
I tried :
(action_tile "key1" "(setq A t")
(action_tile "key2" "(setq B t")
(action_tile "key3" "(setq 1 t)(done_dialog)")
(action_tile "key4" "(setq 2 t)(done_dialog)")
(if
(and (a) (1)
)
(command ...
but was unsuccessful. no matter which combination was selected, the command under all combinations would run.
I am trying to find a lisp that would get an attribute value (tag name = NBR_5) . I'm trying to run a simple routine that would let the user place the value from the titleblock attribute as text on a drawing. I see a ton of articles regarding getting attributes but I am not well versed in programming.
View 9 Replies View RelatedI have a routine that work fine, but I receive a nil at the end of command. How to fix that?
View 7 Replies View Related