The error below has appeared randomly when AutoCAD 2011 is started. There was not an error of this sort, but it suddenly appeared and some of the LISP routines will no longer work.
*Invalid attempt to access
a compiled function definition. You may want to define it using defun-q:
#<SUBR @000000003f5fda98 S:: STARTUP>
I D/L a lisp file (setvars.lsp) that purports to give a list of system variables that match a short string entered in a dialog box.
Unfortunately, an error arises that says 'error : no function definition: STRNUM'
I've looked at the code and can't tell what the writer was hoping to achieve.
The specific section is as follows:
(if F1
(progn
(setq RL (read-line F1))
(while RL
(if (and (wcmatch (strcase RL) (strcase (strcat "*" DESCR1 "*")))
(wcmatch (strcase RL) (strcase (strcat "*" DESCR2 "*")))
[Code] .........
There is no other mention of STRNUM in the whole of the lisp.
There is an accompanying setvars.dat, wherein apparently, the writer compiled a data file of all the system variables in AutoCAD2008, each variable being followed by an '=' and then a description of the variable.
If necessary I can post the whole lisp and dat file, but was hoping to discover the intention from the above extract and therfore where I might work out an alternative to this line.
Looking to turn a string to a real? If so, why are there two 'arguments' following the 'function' STRNUM?
This seems absolutly silly.
(setq p1 (getpoint))
(setq p2 (getpoint))
(setq Dist (distance p1 p2))
Why does this not work?
I'm trying to build a command to replace AutoCAD's "DI" command, to give distance and delta x, y, and z values in decimal and imperial, and keep the angles in XY plane and out of XY plane.
I've got a subroutine that gets the centroid of a closed polygon (lwpoly). It appears to fail if the polygon has any zero length line segments. I've added a trap that catches the error and "highlights" the offending polygon, but it stops there and does not return to the main function that called the subroutine. Is there a way to get back to the main function from the trap?
Here's the subroutine (original function by _gile (Autodesk LISP Forum 9-18-2006):
(defun return-centroid (lwpoly space / obj Region Centroid)
(setq *error* trap1)
(setq obj (vlax-ename->vla-object lwpoly))
(setq Region (vlax-invoke space 'addRegion (list obj)))
(setq Centroid (trans (vlax-get (car Region) 'Centroid) 1 0))
(vla-delete (car Region))
[code]....
I am trying to customize AutoCAd for a special domain where attribute values need to have a type. I can have a clean integrated solution by manipulating the acad.dcl or base.dcl .I am using AutoCAD 2012 . I want to extend the " define attribute" and "edit attribute" dialog boxes to promt the user for a value type when they define an attribute .I can't find the definition for these dialog boxes in acad/ base dcl files. Ideally I want to add another tile definition to these dialog boxes .If that is not possible atleast spawn a different dialog box from the "define attribute " dialog box that will collect the value type from the user.
View 2 Replies View RelatedHow i can calculate bounding box of a BLOCK definition ? I know after inserting a block, we can get bounding box of a block reference.
But how can i get bounding box before insert? Assuming that i never going to scale or rotate it.
Can't you access the block definition via ObjectDBX.
(without the dwg file being open)
I am parsing through the blocks to find all the xrefs.
When I get to an XRef... I don't seem to find a way to check if it's an XRef.
simple example code how can i set my lisp function to radio button ?
i found simple dcl - lisp codes , there is possibility for calling simple cad commands , but this is different about call lisp with buttons
which code i have to change and how for set my lisp on radio buttons ..
here is the sample codes ...
SAMPLE1 : dialog { label = "Sample Dialog Box Routine - Part 1"; : column { : boxed_column { : button { key = "but1"; label = "Button 1";
[Code].....
I want to define en expiration date in registry, after that date the some LISP programs does not allow to run. I think that suitable commands are SetEnv and GetEnv.
define a ExpDt variable that contains Expiry Date as a string. And add some statements inside of the LISP program to call this variable and check it with today's date.
I should define once time in autocad:
(setenv "expdt" "130101"); YYMMDD date for validation period (2013.01.01)
and check this every time that a lisp program should be execeute:
(getenv "expdt") ; if today's date(with YYMMDD format) ">" expdt then lisp program doen not allow to run and should be halted.
for e.g. on 2013.02.28: "130228" > "130101" ==> so the lisp function should be halted and will not work!
(without any alert or message)
a sample list function: (how can implement on this lisp function?)
(defun c:3()
(setq w t)
(while w
(setq a (getpoint "
pick point:"))
(setq p1 (list (- (car a) 0.5)(- (cadr a) 0.5)))
(setq p2 (list (+(car a) 0.5)(+(cadr a) 0.5)))
(command "erase" "w" p1 p2 "")
(command "INSERT" "*3" a "" "" "0")
)
(if (= a nil)(setq w nil))
)
In the foreach function can you use math like (foreach pt1 (add 1) so that foreach one you pick it adds one the next one will be named pt2 then pt3 and so on.
View 6 Replies View RelatedI would like a small menu to pop up near the cursor like the middle mouse button menu, but based on some other function key or quick key shortcut.
View 2 Replies View RelatedIn asp I'd write:
arrFileName = Split(DrawingName, "_")
JobNumber = arrFileName(0)
DrawingTitle = arrFileName(1)
SheetNumber = arrFileName(2)
I'd like to do the same thing in lsp. I don't want to be limited to three fields so the split function is perfect.Is there an equivalent?
How to make a lisp command that will select all objects in the drawing?
View 3 Replies View RelatedI open the drawing without loading the function, when I modify an object with the reactors appears the following error message:
function definition: NAMEFUNCTION
You can avoid this annoying message without removing the persistent reactors?
I prepared a code to calculate number of days between two date.
I want to know how can I define negligible arguments for my lisp routins. It means if I omitted the arguments, lisp code can handle it without any errors ("; error: too few arguments")
In this case, my program defined as: (TotalDays 1st_date 2nd_date)
(TotalDays 1978 03 21 2013 06 25)
and I want to have flexibility: if I use this routine as (TotalDays 1978 03 21), the program should substitute today's date with second date.
I know if I put "nil" instead of date for 2nd_date, It will not be an error, because:
(if (and y2 m2 d2) (setq n2 (GetJDN y2 m2 d2))(setq n2 (fix (getvar "DATE"))))
but that's not my favourite!, how can I omitted 2nd_date completely? as (TotalDays 1978 03 21)
Here is my lisp
;|How to use:(TotalDays 1978 03 21 2013 06 25)|;;;;;By Abbas Aqdam(defun TotalDays ( y1 m1 d1 y2 m2 d2 / n1 n2)(setq n1 (GetJDN y1 m1 d1))(if (and y2 m2 d2) (setq n2 (GetJDN y2 m2 d2))(setq n2 (fix (getvar "DATE"))))(abs(- n1 n2)));;;;Leap years are included;;;;By Abbas Aqdam(defun GetJDN ( year month day / a y m J)(setq a (/(- 14 Month) 12))(setq y (-(+ year 4800) a))(setq m (-(+ Month (* 12 a)) 3))(setq J (-(+ day (/(+(* 153 m) 2)5) (* 365 y) (/ y 4) (/ y 400)) (/ y 100) 32045)))
I was able to find/update a LISP program that returns the dynamic block to its original state, overriding the anonymous name and make the actual block name the effective name. I am in the process of manipulating the LISP program so I can select multiple blocks rather than one at a time.
(defun CYMEFFEC ()(vl-load-com) (setq obj (vlax-ename->vla-object (car (entsel "Select blocks: ")))) (vlax-put obj 'Name (vlax-get obj 'Effectivename)))
I would like to insert a block in a specific layout (eg. "LAYOUT13") using the function vla-insertblock
I have already searched the web and this newsgroup but have not found the solution.
I have a simple lisp function to add a scale axis to a drawing by calling a script, renamed the drawing by appending "withScale" to the file name, and then closing the file. I placed a call to the function in the acad.lsp file in the startup suite. The idea was to batch process all files by simply opening them. Upon open the startup acad.lsp file runs, which calls my lisp function, which in turn calls the scale script. It should then execute the renaming, saving, and closing commands. The problem is that it is calling the script fine and renaming the file, but it does not save the changes before closing. Here is the lisp function
(defun saveScale(); (command "-purge" "all" "" "n")(if (findfile "C:/Users/Russell/Desktop/TreeFiles/Automation/Scale&Key.scr")(command "_script" "C:/Users/Russell/Desktop/TreeFiles/Automation/Scale&Key.scr")); end if (command "_.zoom" "e") (command "_saveas" "2013" (strcat (getvar "dwgprefix") (vl-filename-base (getvar "dwgname")) "withScale.dwg")) (command "close") ) (saveScale)
Apparently you cannont run any lisp commands after calling a script, however the renaming still follows through.
I've attached the script file as well. (I couldn't attach .scr format so you may need to rename it).
I have a list function that asks for the user to pick points when it is run. It looks something like this (foo arg1 arg2) When invoked it asks the user to pick points and press enter when done It.
Instead of getting the points from the user i want to pass it a list of pre-defined points. The code cannot be changed so I must use it as is.Is this possible, if so how can it be done?
I am looking for a function to print out the entire entity list of the selected entity...
so... walking down through the entity data... print out what it finds... any time it encounters an entity name... then do an entget and print that out too.
We have a lisp routine that I co-authored ages ago and then haven't done much programming in about 7 years. I seem to have forgotten much of my language skills. This portion of the lisp routine was running fine in autocad 2005 which is what the computer had on it, and it doesn't run on autocad 2010.
I've narrowed it down to the while statement which is why you see it commented out, but that portion is necessary. My main question is was there a change in the language specifically the while statement between 2005 and 2010?
; GET LINES OVER 10" AND THROW OUT (if (= (cdr(assoc 0 outerinfo)) "LWPOLYLINE") (progn (setq remlenouter 0.0) (setq numseg (cdr(assoc 90 outerinfo))) (setq edd (member(assoc 10 outerinfo) outerinfo)) (setq n1 0) ;(while (< n1 (- (* numseg 4) 4)) ;(setq dist (distance (cdr(nth n1 edd)) (cdr(nth (+ n1 4) edd)))) ;(if (>= dist edmmax) (setq remlenouter (+ remlenouter dist))) ;(setq n1 (+ n1 4)) ;) ; end while (setq dist (distance (cdr(nth n1 edd)) (cdr(nth 0 edd)))) (if (>= dist edmmax) (setq remlenouter (+ remlenouter dist))) ) ; end progn ) ; END IF
So i have almost 30 installs and my custom programs are working in all but this new install. Now when i pick on the tool palette that runs the program, i get a message shown in the attached png, then when i pick "OK" i get "Unable to load dialog box."
I've searched these hallowed halls but all the messages seem to point to 2002 versions of ACAD Map and i'm running plain AutoACAD (that came with Product Design Suite, aka Inventor.)
I have made a block with consist of shape drawing and some attribute data that must specified when the block inserted. my question is, how to make "warning error input" appear if mistake input occurs?
View 6 Replies View RelatedIn my acaddoc.lsp I have it load an autoload.lsp file that contains many lisp routines (attached). I am getting the "extra right paren on input" error. It appears to error after the third line in the autoload file "san18"....I removed everything after the third line and no error, I put them back and it errors and only loads first three?
I am using Civil 3D 2014 and I have added all neccesary paths to the trusted locations.
So i have managed to get my VBA apps working up to version 2010 (with the AcFocusCtrl). I just upgraded to AutoCAD 2012. For some reason I cannot get the ACFocusCtrl on my VBA userform. When I try to drag it onto the userform, I get an error "Class Not Registered". how I can load that control?
View 4 Replies View Relatedjust test my code about create a stair 3D,still running the program and then appeared a display box,with said "Error analyzing internal islands",what meaning it said?.at attach file with "Error Analysing-1.jpg is the result that program.
View 1 Replies View RelatedI have created a very basic reactor as a test. As you can see, it doesn't actually do anything other than set a variable so I know the error isn't caused by something I'm doing with the reactor.
(defun np:test (reactor callbackdata / ) (setq abc 123))(if (not np:reactor1) (setq np:reactor1 (vlr-command-reactor nil '((:vlr-commandwillstart . np:test))) ))
OK, so the problem I have found is that if I load this reactor into a drawing and then use the MVSETUP command but escape out without completing the command, AutoCAD throws an error and becomes unusable. When I then close AutoCAD down I am met with multiple unhandled exception errors before the app finally closes.
I then altered the reactor from a vlr-command-reactor to a vlr-editor-reactor and found that with this, I am no longer met with the same error while escaping out of MVSETUP. However, when I close CAD down I am eventually left with an 'AutoCAD Application has stopped working' error dialog on screen which reports that acad.exe as crashed.
I am working on AutoCAD Architecture 2012 (although I have tried it on 2013 to with the same results) on Windows 7 64bit. I have also tried this on ACA2012 x32 and found the same error exists.
I am doing something fundamentally wrong in the way I am handling reactors?
I have a problem with "tools/window attributes/configure current"when I try to configure current window (especialy tabulator spaces 8 -> 2) I got fatal error: unhandled access violation Writing 0x0000 Exception at cc424946h
Windows 7 (x64)
AutoCAD 2009, 2010, 2011, 2012
standalone instalation
user with administrator privileges
My code returns the error, but it still works.
(vl-load-com)
(setvar "cmdecho" 0)
(vlax-for ucs (vla-get-UserCoordinateSystems (vla-get-Activedocument (vlax-get-acad-object)))
(setq UCSList (cons (vla-get-Name ucs) UCSList)))
(setq FileName (vl-Filename-Base (getvar "Dwgname")))
(setq NewUCSList (vl-remove-if '(lambda (x) (vl-string-search FileName x)) UCSList))
(setq Listlength (length NewUCSList))
[code]....
I am trying to customize my quick properties (acad.cuix), but i keep on receiving fatal error message. And when i click on quick properties it is all blank. Also, the Properties dialogue box is not working when i click on something, the properties do not appear on the Properties dialogue box. Attached is the error message.
View 3 Replies View RelatedBy running this routine it returns the following error message:
ERROR: bad argument type: VLA-OBJECT 7
(defun _make_tblstyle (stlname / adoc acmcol tblstyle txh)
(setq adoc (vla-get-activedocument
(vlax-get-acad-object))
)
(setq acmcol (vla-getinterfaceobject
[Code] .......