Currently I have to open dwg file each time I need to change the stall number or name. I use Fields so I only need to edit 1 field per file.
This becomes an issue as I have excel files linked, and I have to re-link them all after changing the stall numbers.
Multiply this by 20-30+++ files, and I have a big headache.
Is there an easier way to edit the Fields for ALL files and to update the links to renamed excel files?
I have a sheet set that i have been adding sheets to for a couple weeks and inserting fields to reference page numbers and titles. I installed service pak2 today and now all of a sudden I am not able to insert fields. I get an AutoCAD warning that says " there are no registered modules to edit fields or demand loading is currently disabled. I have not changed a single setting other then loading service pak. This sheet set is over a 150pgs right now.
View 1 Replies View RelatedIV11 SP2, Vaulted project.
I have several drawing templates that have prompted entry field text in the border and bring some model properties in the block. Problem is, if any change in the model properties occurs, this dialog box pops up EVERY TIME I return to the drawing, when changes in the model properties have nothing to do with the border. I have just checked and IV10 SP3a does not suffer from this behaviour. For me, this is an unnecessary dialog that pops up without being required to do so, and is time consuming - it takes extra mouse/keyboard clicks to dismiss and up to 10 seconds for it to close after being dismissed.
Is there an option to turn this off? (I've checked the Options >> Prompts tab, but there's nothing there)
I've been up and down the forums looking for some direction or programming code for this to no avail.
What I'd like to do is edit a table where the cells are populated with fields. I'd like to copy the last row of the table to a new row (fields and all), then change the fields of the row I copied FROM to text, and lock those cells.
I'd like to copy this row including the fields to a new row beneath it. Then edit the cells of the first row to change the fields to text, and then finally lock the cells of the first row so that only the new row would update when the field properties change. Eventually they will be populated with data from the Vault..
I'm trying to develop a help wanted ad, which can be used by several of our franchises. Would like to know how I can make certain fields within the add able to be edited such as location address and phone number and have it in a PDF format so the format can not be changed or altered. Can someone step me through the process?
View 1 Replies View RelatedI tried to edit some raw files as layers in PS CC from LR5 (Photo>Edit in>Open as layers in Photoshop). I want to do this for blending layers. One file works but 2 or more files doesn't. PS opens and nothing happens. If have the latest versions of LR5 and PS CC.
View 3 Replies View RelatedI am using a symbol that includes a several text boxes. Each text box includes "prompted text" and "drawing properties". When I insert the symbol onto a drawing, the "Edit Property Fields" menu appears. In this menu, I can input my prompted field text or see the various "drawing properties".
My question is, how do I change the order that these property fields are displayed? It seems as if it depends on the order that the text boxes were created while defining the symbol definition. Is there any other way to change the display order?
Is it possible to write multiple prompted entry fields down in a single pass? As it is now, you can see the taskbar reporting as it writes down each line.
Essentially i've got 6 different fields i'm trying to write down using code like shown below:
If oTB.GetResultText(oTitleBox1) <> Me.Title1.Value Then Call ThisApplication.ActiveDocument.ActiveSheet.TitleBlock.SetPromptResultText(oTitleBox1, Title1.Value)End IfIf oTB.GetResultText(oTitleBox2) <> Me.Title2.Value Then Call oTB.SetPromptResultText(oTitleBox2, Title2.Value)End If
Just wondering if there's a way it can be written down in a single pass to save time or if it's a limitation of prompted entry text.
I was wondering if it was possible to say have a cover sheet of a project with fields and then have the other sheets in the project have their fields populate using information from cover sheet?
View 3 Replies View RelatedIs there any way to make print merge fields relative in position to other fields or to non-variable text.
For example if I am doing address labels and I have fields for City and State:
Their positions are absolute, and the state ends up overwriting the city for long city text, as does the comma.
What I want is for the comma to follow the last letter of the city, and then state to follow that.
And yes, I realize that I can combine all three into one field, but I am asking this as a general usage of the feature. One doesn't always have control over the source.
I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedI'm trying to find a way to plot multiple (over a thousand) DWG files to PDF without doing each one manually. I've played around a little bit but without any luck. I'm using AutoCAD 2002 LT. Is there any way to do this?
I've also got little to no experience with the more complex settings and abilities of autocad so do so in laymans terms.
2002 lt has no general publish (only publish to web) option and how sheet sets work.
how to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies View RelatedI am using Autocad Map 3D 2011. I am looking for a way to edit multiple splines at once similar to the multiple pedit command. I need to convert them to plines. I have been selecting them one at a time, typing p, enter enter enter, selecting the next one and so on but it would be a time saver to be able to select multiple splines and have the "convert to pline" command work on all of them. As it is, if you select more than one it only acts on the first selected.
View 2 Replies View RelatedLet's say I have a whole bunch of blocks, and they are all different colors. I want to make them all one color without having to go into the block editor screen for each one. there has to be a way.
View 9 Replies View RelatedIs there a way to select multiple multileaders and change the text to the same thing in all of them? (Like a block with attributes, where you can simply change the attribute in the properties box).
This would save so much time instead of going to each one of them, double click, edit text, "tab", "enter"...
LDT had a command for editing multiple lines of text without exiting the command. This made renumbering and relabeling very easy and saved time.
_TEDIT
Currently I am getting an error.
Command: (load "tedit")
; error: LOAD failed: "tedit"
Command: _TEDIT TEXTEDIT
Is there a similar command in C3D? Or can I edit the old command to be compatible with C3D?
Is there a way to edit multiple holes of the same kind.,or do i have to change each one seperately.
eg. Plain Holes To Tapped Holes
Iv 2010
Is there any way to edit multiple attribute properties, NOT using battman? While battman will chnage every att-block within the drawing, I'm looking for a way to change the text size of one specific line of text within an attribute, and ONLY change it in a certain few within the drawing. It'd be nice if I can select those specific blocks and change the properties in the properties manager, but it's not an option.
View 7 Replies View RelatedI have a block with an attribute and need to change the first three characters of each to a different two characters. I recall my instructor once showing me how i could do this easily without having to click on each block to change the attribute.
View 2 Replies View RelatedI would like to find a way to edit multiple text boxes in inventor instead of one at a time.
For example, in autocad, when multiple text boxes are selected, any values that are different in the properties window are represented as "varies".
Is there a way to select multiple text boxes and do things such as change the text height, justification, font, etc, just as it works in autocad?
I have an assembly drawing .IDW with more than 50 instances of an O-ring (same ipt.). Is it possible to edit the hatching of the O-ring and all 50 will update without having to edit each individually. ?
Inv 2008 sp1
I have a large number of profile views in Model space that I need to edit the Elevation values for all of them in the Profile View properties. Any way to select them all and edit the Profile View Properties? Maybe creating a group or something?
Civil 3D 2012
Win 7 Ultimate x64
Intel Core 2 3.2Ghz - 12MB RAM
Nvidia 8500GT Dual DVI
we use Civil 3D as a design tool, and sometimes in the finished (plotted) product. We use STB (named) plot styles and layer settings to control object display.
I have a situation where I have received a drawing that is populated with Civil 3D styles already. However, in the Display tab, all the object Plot Styles are set to ByBlock. That does not seem to work properly with .STB plot style management, because the individual objects (contours, points, etc.) pick up the plot styles of their parent objects. So instead of a contour on layer V-TOPO-MAJR plotting with the layer settings of V-TOPO-MAJR, it follows the layer settings of C-TOPO, which is the layer containing the parent surface.
Is there a way to programmatically step through styles for surfaces, profile views, etc. and change the "ByBlock" setting to "ByLayer" in all styles?
Im working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
I have a .dwg file which contains numerous blocks (70 or so) and they all have unique names.All these blocks have nested text.
I want to edit the attributes of all the text, in all these blocks, such that they assume the same text style, text layer and colour.
Obviously, with so many blocks, I want to avoid clicking on the text and editing the attributes individually.
I tried a lisp file called ATcolour.lisp, but even this is very time consuming.
I need to be able to batch process a bunch of title block attributes automatically.
Block Name: Title Block
Tag Name: SH
Currently they come out with just the number 1, 2 , 3 etc I need to add a leading zero ie 01, 02, 03 etc
All the scripts I have will just replace the number with another
I just want to append the zero infront of the existing number
ie the code will need to read the existing number and decide if its less than 10. if it is less than 10, then the code just needs to append the leading 0. if its 10 or over, then do nothing.
How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 Replies View RelatedI use LightRoom 3 to simultaneously modify multiple photos. For example, I will use the "grid" vew to show hundreds of photos. I will then select the ones that I want to modify (i.e. maybe they are under exposed). I will then adjust the exposure setting to modify all the selected photos. I might then select a different set of photos and change some other parameter.
Is this same functionality available in CS6? I wasn't sure if you could simultaneously modify multiple photos or if it was intended more for one photo at a time.
I was wondering if it is possible to edit the threshold on multiple layers at the same time instead of editing one layer at a time. I am currently working on an animation which i import from imageready, and would like to apply the threshold effect. Is there a trick to make this possible?
View 8 Replies View RelatedI have photoshop CS2, and would like to know if there's a way to make simple color adjustments to multiple images at the same time.
If not, is there a way to make some kind of template to apply the same adjustments to all photos individually?