Is there a way to select multiple multileaders and change the text to the same thing in all of them? (Like a block with attributes, where you can simply change the attribute in the properties box).
This would save so much time instead of going to each one of them, double click, edit text, "tab", "enter"...
Running ACad 2012 SP1 on Win 7/64 bit.
NVidia GEForce GTX 465 video card
Attempting to hatch (walls, in this case). This screenshot is just after I enter the Hatch command...... And this is what happens when I click inside the wall to be hatched. This is the exact same sceen, one mouse click later:
... This seems to be my green text somehow suddenly expanding in size. This then prevents the hatch from being properly applied. THe green text is all annotative, seems to be MLeader, and also happens when I have an MLeader with a block / attirbute (ie, in the first image I have a "W6" block in a diamond multileader.
To avoid this I have been usind Layiso / Layuniso but this takes time & doesn't automatically 'cut out' the hatch if there is text in the way.
Why are Multileaders with Annotative Blocks not possible?
View 6 Replies View RelatedAre multileaders in 2011 not associative? I had to move a group of equipment off of a bulkhead to allow for insulation I did not know was there and when I went back to my layout, I had to reattach every arrowhead to its respective piece of equipment.
View 9 Replies View RelatedI am in no way an expert in ACAD.We are experiencing "random" problems where we have a multileader with left justified text and the leader extension option turned on. There is probable a common trait with all the offending leaders but we are yet to see it.
Basically, with some leaders, the landing length is being set to a negative value. We have only noticed this since we turned on the extend leader to text option. The result of this is that the leader lines can sometimes cross through the text. Sometimes we fix them, then they revert to a negative value again when we close the drawing.
We can, of course, uncheck the extension option in the drawing and the problem appears to go away. However, we have unchecked this option in our templates now, but when we open a new drawing based on the updated templates, the option is checked again.
I have some mulitleaders in paperspace that lost their associativity with objects in model space. _dimreassociate will work with to reattach a leader arrowhead to a model object but the command doesn't work with multileaders. Is there another way to do this or do I have to redraw the multileaders?
View 2 Replies View RelatedIs there any way to edit multiple attribute properties, NOT using battman? While battman will chnage every att-block within the drawing, I'm looking for a way to change the text size of one specific line of text within an attribute, and ONLY change it in a certain few within the drawing. It'd be nice if I can select those specific blocks and change the properties in the properties manager, but it's not an option.
View 7 Replies View RelatedSo I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
I am trying to batch plot to PDF's from a drawing file that has multiple tabs in it. I would like each tab to be a separate PDF file. We are utilizing Acrobat X to write the PDF's. AutoCAD places all of the tabs into one file whether I tell a Multi-sheet file or a Single-sheet file.
View 6 Replies View RelatedI opened a drawing today and the text in the multileaders is 10x's too large as you can see in the attached screenshot of construction keynotes.
It was fine when I closed it yesterday and I was the last person to open the drawing.
Multileaders in both model and paper space are affected.
I've tried:Running an Audit and fixing errors (no change).Changing the annotative scale of the drawing - this does scale the multileaders, however the text is still 10x's too large.Adding annotative scales to the Object Scale List of the multileaders (no change).Changing settings like DIMSCALE, CANNOSCALE, LTSCALE (no change).
I suspect this is a random error without a fix and I'm going to have to delete all the multileaders, purge the drawing, and redraft the multileaders, or do what I did before annotative multileaders: use dynamic blocks I created for making callout notes.
C3D 2013
there is a way I can get NEAREST snap to work on the multileaders?
END and INT (where leader crosses other entities) work but cannot use NEAREST.
Can use NEAREST on normal leaders though.
Running AutoCAD LT 2013 on Win 7 Pro.
I am adding some complex details to my block library, and I want to include about 20 different multileaders in each block so that I have immediate and consistent access to the annotations. I may use an individual block many timess in a drawing, but each instance of the block may only require me to use 4 or 5 of the multileaders. I also want to be able to manipulate the multileaders in the same way as I do any regular multileader (change their position and location, landing length, align, etc) and even align and position them with other multileaders that are not part of the block.
How do I create or use a block in this way? I essentially want to create a dynamic block of some sort, but I don't really know where to start. Am I trying to do the impossible? Would it be easier to just create a visibility parameter to keep the mleaders hidden, go into the block editor at every instance of the block, copy the mleaders I want to use, and paste them into the drawing?
I am using map 3d 2011 and i am running into issues with the use of multi-leaders. I have a dwg with a few shape files in it and I have added multileaders to the dwg. When I save, close and then reopen the file the multileaders show up for a brief second during the loading process but then they disappear. All my settings are correct (layers, visibility, scales) as far as the leaders go but I can't figure out what the heck is going on. I tried adding another, select similar and only the one shows up that I just added. Saved the file and reopened. Same thing, the leader I just added shows up with the others for a brief second and then "poof" gone!!!
View 1 Replies View RelatedWhy does my system regenerate after selecting multileaders for aligning? To regen it zooms to extents
View 1 Replies View RelatedWhen editing multileader text, the insertion point changes. How do I stop this? I have several multileaders with their insertion points aligned together (left justified notes) but if I edit any text, the multileader jumps to a new position and is no longer aligned with the other notes.
View 9 Replies View RelatedDoes relative coordinate entry work for multileaders? I would like to keep all of my leaders consistent and neat but other than using ost I cannot figure out a way to make them all line up. I would like to use coordinate entry if I could, maybe I am doing things in the wrong order?
View 8 Replies View RelatedI am using Autocad Map 3D 2011. I am looking for a way to edit multiple splines at once similar to the multiple pedit command. I need to convert them to plines. I have been selecting them one at a time, typing p, enter enter enter, selecting the next one and so on but it would be a time saver to be able to select multiple splines and have the "convert to pline" command work on all of them. As it is, if you select more than one it only acts on the first selected.
View 2 Replies View RelatedLet's say I have a whole bunch of blocks, and they are all different colors. I want to make them all one color without having to go into the block editor screen for each one. there has to be a way.
View 9 Replies View RelatedLDT had a command for editing multiple lines of text without exiting the command. This made renumbering and relabeling very easy and saved time.
_TEDIT
Currently I am getting an error.
Command: (load "tedit")
; error: LOAD failed: "tedit"
Command: _TEDIT TEXTEDIT
Is there a similar command in C3D? Or can I edit the old command to be compatible with C3D?
Currently I have to open dwg file each time I need to change the stall number or name. I use Fields so I only need to edit 1 field per file.
This becomes an issue as I have excel files linked, and I have to re-link them all after changing the stall numbers.
Multiply this by 20-30+++ files, and I have a big headache.
Is there an easier way to edit the Fields for ALL files and to update the links to renamed excel files?
Is there a way to edit multiple holes of the same kind.,or do i have to change each one seperately.
eg. Plain Holes To Tapped Holes
Iv 2010
I have a block with an attribute and need to change the first three characters of each to a different two characters. I recall my instructor once showing me how i could do this easily without having to click on each block to change the attribute.
View 2 Replies View RelatedI would like to find a way to edit multiple text boxes in inventor instead of one at a time.
For example, in autocad, when multiple text boxes are selected, any values that are different in the properties window are represented as "varies".
Is there a way to select multiple text boxes and do things such as change the text height, justification, font, etc, just as it works in autocad?
I have an assembly drawing .IDW with more than 50 instances of an O-ring (same ipt.). Is it possible to edit the hatching of the O-ring and all 50 will update without having to edit each individually. ?
Inv 2008 sp1
I have a large number of profile views in Model space that I need to edit the Elevation values for all of them in the Profile View properties. Any way to select them all and edit the Profile View Properties? Maybe creating a group or something?
Civil 3D 2012
Win 7 Ultimate x64
Intel Core 2 3.2Ghz - 12MB RAM
Nvidia 8500GT Dual DVI
we use Civil 3D as a design tool, and sometimes in the finished (plotted) product. We use STB (named) plot styles and layer settings to control object display.
I have a situation where I have received a drawing that is populated with Civil 3D styles already. However, in the Display tab, all the object Plot Styles are set to ByBlock. That does not seem to work properly with .STB plot style management, because the individual objects (contours, points, etc.) pick up the plot styles of their parent objects. So instead of a contour on layer V-TOPO-MAJR plotting with the layer settings of V-TOPO-MAJR, it follows the layer settings of C-TOPO, which is the layer containing the parent surface.
Is there a way to programmatically step through styles for surfaces, profile views, etc. and change the "ByBlock" setting to "ByLayer" in all styles?
Im working on a plastic enclosure, I needed to make a hole for a connector but this hole would cut into both the top and bottom of the enclosure. Normally when I edit parts in an assembly I just double click them, they become transparent and I can do all my edits. Since I need to make a hole that cuts into both parts, I just went to the 3D Model tab started a new sketch and extruded out the cut.
However doing it this way does not reflect the changes when the parts are opened on their own. Is there a way to have these changes trickle down to the part files?
I have a .dwg file which contains numerous blocks (70 or so) and they all have unique names.All these blocks have nested text.
I want to edit the attributes of all the text, in all these blocks, such that they assume the same text style, text layer and colour.
Obviously, with so many blocks, I want to avoid clicking on the text and editing the attributes individually.
I tried a lisp file called ATcolour.lisp, but even this is very time consuming.
I need to be able to batch process a bunch of title block attributes automatically.
Block Name: Title Block
Tag Name: SH
Currently they come out with just the number 1, 2 , 3 etc I need to add a leading zero ie 01, 02, 03 etc
All the scripts I have will just replace the number with another
I just want to append the zero infront of the existing number
ie the code will need to read the existing number and decide if its less than 10. if it is less than 10, then the code just needs to append the leading 0. if its 10 or over, then do nothing.
i cannot edit the dimension by right clicking it.. the dim text position, precision, dim style and flip arrow is missing.. im using cad2010..
View 3 Replies View RelatedI'm working on a new computer and some of the ACAD settings are different.. When I am in paperspace, I am used to just double-clicking in a viewport to work in modelspace..
Whether the viewport is locked or not, I am used to being able to zoom in and out to scale, or just work there and the viewport stays stationary.
There is some setting that is causing the viewport to "zoom out" every time I double click in the viewport. I have to then lock it which means that I can't change the zoom-to-scale factor.. It's also a pain in the neck.
Also, when I have multiple viewports open that are not locked, they all "zoom out" also when I double-click in one..
Any knowledge of some setvar to fix?