I have a block with an attribute and need to change the first three characters of each to a different two characters. I recall my instructor once showing me how i could do this easily without having to click on each block to change the attribute.
View 2 RepliesI would like to know if it is possible to have a single attribute fill multiple strings of text. I have text that appears in more than one spot in a block of mine but when inserting the block i would like to be prompted once to fill the attribute.
View 1 Replies View RelatedI need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
I am updating a block with attributes, adding some new, removing some old and moving the rest around. As can be expected, when I am done and save the block and insert it the order of the attributes are all messed up.
Now, as far as I can understand, BATTMAN changes the order of the attributes all right - but only in that drawing where the block is inserterd in. I want to change the order permanently. This block is to be used on pretty much all of our projects, I can't have to run Battman all the time!
How can (or can I), set a revision block to be able to edit the attribute when I save an Inventor DWG as an AutoCad DWG. ex. we create drawings in Inventor, save as dwg and send for approval. Our manager is unable to edit the attribute in the revision block without exploding it.
View 9 Replies View RelatedI'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies View RelatedI have only one user with this problem. He tries to edit an attribute block and when he selects one of the values and erases it the default value doesn't erase. He then has to enter some text and erase that and it works.
View 3 Replies View RelatedHow do I prevent "Edit Attribute" pop up prompt for entering text for an attribute in a block? I just want the same attribute text each time I insert the block, I don't want the "Edit Attribute" popup window to re-enter the same text every single time.
I do want the attribute text so mirror won't reverse it (I just want permanent attribute text).
First I delete the old regular text.Second I give the block an Attribute Definition Tag and enter the text I want in the Tag blank. Third I center where I want the text. Forth I save the block.
When I finally insert the block I get the "Edit Attribute" pop up to renter what I want it to say. Like I said earlier, I don't want this pop up, I just want to enter the text once and that's it. Also if I enter nothing in the "Edit Attribute" pop up, then no text will show on the block.
We have a client whom insists on 1/8" text and my blocks are all sized for 3/32". What I wanted to do is create two visibility states for the block. One using the 1/8" text and one using the 3/32" and be able to switch between them. I can get the border of the tag to work, but the text doesn't switch sizes.
Is this even possible? Is there a better way to deal with all my tags and needing to have two different versions of them? (Tags such as fixture tags, note tags, etc...)
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
I need to be able to batch process a bunch of title block attributes automatically.
Block Name: Title Block
Tag Name: SH
Currently they come out with just the number 1, 2 , 3 etc I need to add a leading zero ie 01, 02, 03 etc
All the scripts I have will just replace the number with another
I just want to append the zero infront of the existing number
ie the code will need to read the existing number and decide if its less than 10. if it is less than 10, then the code just needs to append the leading 0. if its 10 or over, then do nothing.
I am looking for some code or something which can change the title block revisions from "01" to "02" in multiple drawings.
The title block revision block is set in attributes.
using ACadLT 2008. i'm creating a frame sheet for my firm. i created attributes inside a block. when double clicking, the attribute dialog will lunch and i can type the info, but...
i need instances of the same attribute among the sheet so for example the "date of submission" and the date i keep in the "history" are always the same, i don't want to enter twice the same date.
I have several title blocks each in their own paperspace pages. Could have the attribute filled in, but more than likely only one page will have values filled in the attributes. I am looking for a VL method for finding which pages title block is filled in so that I can get those values and fill in the equivalent attributes for all of the other pages. Currently I am using a long set of :
(IF (setvar "ctab" "8.5x11") (IF(TBLSEARCH "BLOCK" "TB-8.5x11") (IF (/= "" (get-att "OWNER" "TB-8.5x11")) ; Function to read a named attribute(editblk "TB-8.5x11") ; Function to pull up the attdia(IF (setvar "ctab" "11x17") (IF (TBLSEARCH "BLOCK" "TB-11x17") (IF(/= "" (get-att "CUSTNMFIRST" "TB-11x17")) (progn ; At the last page ditch the [Code]..........
The example is just a very simplified version of what I'm doing. I just need to find the information, if it exists in any page and store it for later. Afterward, I'll fill in each page's Title Block with the stored information.
I know that this can be done much more efficiently. As I am currently flipping through the pages too much action is occurring on the screen and it makes some people nervous. With VL I should be able to run the search quietly, but I would still like to (setvar "ctab" "to the page with the filled attribute value") after the LISP is finished storing values.
I'm designing a part that in Autodesk Inventor 2013 that is constructed from several layers laminated together. I have 4 layers:
F (front)
M1 (middle, variation one)
M2 (middle, variation two)
B (back)
The final solid will lhave 17 layers laid out like this:
F | M1 | M2 | M1 | M2 | M1 | M2 ... | B
I currently have a part file containing
F | M1 | M2
What's the best way to create this solid if I want to a) keep all instances of M1 and M2 in sync, and b) make it easy to work on all 4 layers. Do I have to export F, M1, M2, and B as individual parts and import them into an assembly or can I keep them in one part file? I really like the ability to be able to work on all the solids at the same time because they're visually dependant on each other.
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
I'm sure I've seen it here before and have probaly forgotten how to do something that is simple although how do I change an inserted block (A) into block B? i.e. if I select 1000 instances of Block_A I want them to all be converted into Block_B (without editing Block_A) where Block_b is already defined in the CAD file.
View 1 Replies View RelatedWhat I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies View RelatedI need to connect to specific instances of AutoCAD and Plant3D. The Running Object Table (ROT) only holds one instance so GetObject wont work.
I've tried getting the correct instance using the hwnd with the AccessibleObjectFromWindow function. I'am thinking the easiest way is to autoload a plugin to communicate with, maybe through a service.
I was wondering if there exists an Autocad command that would allow the user to click an object, and then "highlight" all instances of the object. Refer to the attached pdf -hopefully it can convey what my words cannot.
For example:
The block name is "resistor" and there are 10 instances of this block. When I click the block "resistor", a dialog box will open, displaying the 10 "resistor" blocks.
When I select one of the ten "resister" blocks, that block will become highlighted. The reason for this is that I am building a very large electrical drawing, and this feature would make it infinitely easier to navigate. I know this feature exists in Matlab and I was wondering if Autocad allows for this kind of command.
As the subject line says, when multiple instances of Inventor are open on the same machine, the addin will only show in the first one. I do not see any errors generated and tried many approaches. I tried to use the ribbon abpannelcontrol
created by the first instance. Or in every subsequent instance of Inventor to delete the existing ribbon abpannelcontrol, and recreate them from scratch. Both approaches did not work.
How do I prevent Inventor from opening files in new Inventor sessions?
If I try to open a file from Windows Explorer or from an email attachment, it opens it up in a brand new Inventor session, even if I already have Inventor open.
If I select two or three files in Windows Explorer or from an attachment to open, it opens them all in individual new Inventor sessions.
I would like to set Inventor (or Windows) so that these files open in the already existing session or at least the same session as each other. I didn't have this problem before upgrading to a new computer and reinstalling.
I discovered the TXT2MTXT command and how wonderful it is, but there is one thing missing. Is it possible to change multiple texts, but separately WITHOUT having to re-issue the command? I've experimented with some of the in command options, but unless I'm missing something, nothing seems to work.
Preferably, I would like it to work like the FILLET -> Multiple command, so I could select a group of texts, convert them then select another group etc, but the 'multiple' option in TXT2MTXT does not work in such a way.
I use a "dump assembly" of assemblies to create cut lists. I throw in multiple copies of each assembly for the job. Sometimes it can be 100 or so of each.These are not placed in any way and could be all placed at the origin. This is only for the parts list and servers no other function.
Any way to place multiple instances of an assembly at once?
I have an assembly with multiple instances of a subassembly. I'd like to remove the subassembly and place the subassembly components (i.e. multiple instances) in the main assembly. When complete, the top assembly would have multiple instances of all the subassembly components.
Component promote seems like the right way to do this. So, I selected an instance of one of the subassemblies components and promoted it. That component was promoted, removing it from the subassembly as placing it in my top level assembly.
However, all the other instances of that component disappear (which makes sense since that component is no longer in the subassembly). Unfortunately, this means I have to assemble and constrain all the other instances that disappeared.
So a quick search came up with "don't open from the Vault; open from within Inventor."
Lets not have that arguement.
My office just upgraded from Inventor 2009 to Inventor 2010. 3 seats, all installed the same way. When the other two users open something from the Vault, and then open a 2nd file (be it a drawing/part/assembly), it opens as a new window within the same Inventor session. (Just like it used to in .../2008/2009).
When I open from the Vault, it starts a new session of Inventor. This is frustrating, when you have an assembly open, modify a bunch of components, and then want to open their respective drawings to update them... the drawings will open in new sessions when opened from the Vault.
Obviously I've got something changed somewhere. Quick search through the Inventor options came up with nothing. Vault options?
Please don't tell me to start opening files from inside Inventor... that's a waste of my time... and everything has worked fine until this fresh install of 2010.
I have a door with 3 of the same handle. I have a program in which the user selects 1 of the handles to turn it into a keyed handle. Now, this all works but the problem is that all of the 3 regular handle instances will be replaced with the keyed handle.
Dim oOccHandle As ComponentOccurrence = oINV.CommandManager.Pick(SelectionFilterEnum.kAssemblyOccurrenceFilter, "Select a door handle to replace.")
oOccHandle.ReferencedDocumentDescriptor.ReferencedFileDescriptor.ReplaceReference(PathToKeyedHandleModel)
I need multiple (say two) instances of the same text values (in the same drawing) but in different formats.
Consider this: I have a drawing sheet with a title block that contains the drawing number and the author's name at the bottom with some other drawing details. Now I wish to have these "values" arranged in a matrix form at the top also, for indexing purpose.
TitleBoxMonoSpace.png
One way is to manually enter each value, one by one, in the matrix box but that would be too time consuming. So, is there a way to automate this; where I can enter the values in the bottom title block, which would automatically update the above matrix?
I believe it can be done using a combination of Attributes and Fields but am just not getting it. To make the issue even worse, I need Numbers without hyphens (-) and only Initials of the author's name!
I'm having difficulty making a change to multiple texts. I received a drawing from another firm that uses different text styles than my firm. I can change all the text styles to mine, but they all hold onto their original fonts. How to change the fonts in multiple instances.
View 3 Replies View RelatedIs it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.