How can (or can I), set a revision block to be able to edit the attribute when I save an Inventor DWG as an AutoCad DWG. ex. we create drawings in Inventor, save as dwg and send for approval. Our manager is unable to edit the attribute in the revision block without exploding it.
View 9 RepliesI am updating a block with attributes, adding some new, removing some old and moving the rest around. As can be expected, when I am done and save the block and insert it the order of the attributes are all messed up.
Now, as far as I can understand, BATTMAN changes the order of the attributes all right - but only in that drawing where the block is inserterd in. I want to change the order permanently. This block is to be used on pretty much all of our projects, I can't have to run Battman all the time!
I have a block with an attribute and need to change the first three characters of each to a different two characters. I recall my instructor once showing me how i could do this easily without having to click on each block to change the attribute.
View 2 Replies View RelatedI'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies View RelatedI have only one user with this problem. He tries to edit an attribute block and when he selects one of the values and erases it the default value doesn't erase. He then has to enter some text and erase that and it works.
View 3 Replies View RelatedHow do I prevent "Edit Attribute" pop up prompt for entering text for an attribute in a block? I just want the same attribute text each time I insert the block, I don't want the "Edit Attribute" popup window to re-enter the same text every single time.
I do want the attribute text so mirror won't reverse it (I just want permanent attribute text).
First I delete the old regular text.Second I give the block an Attribute Definition Tag and enter the text I want in the Tag blank. Third I center where I want the text. Forth I save the block.
When I finally insert the block I get the "Edit Attribute" pop up to renter what I want it to say. Like I said earlier, I don't want this pop up, I just want to enter the text once and that's it. Also if I enter nothing in the "Edit Attribute" pop up, then no text will show on the block.
We frequently will create a new part and drawing based on an existing drawing to save time recreating views and re-dimensioning the entire drawing. This is done by using Design Assistant to copy the idw and ipt file to a new name.
The only problem we have experienced with this workflow is that the revision history for the old drawing is maintained in the new file, and there doesnt seem to be a way to reset it. This also causes us a problem if a drawing needs to be changed from numeric to letter indication of revision level.
Any way to reset the revision history so that a new table can be started from scratch?
When a revision is created we bump up the revision using a letter. If there are multiple changes done to the drawing during that revision we will use a number to indicate that. For instance; if I have 3 changes to the drawing for Rev C they will be tagged as C1, C2, C3. However the drawing Rev in the title block should only display C.
Is there a way to make the revision block do this? Right now we place in the DESCRIPTION a note like 1. Added Dim in zone E10. 2.Text was "Flat" in zone H3. But this for goes the ZONE column that comes with the revision block and makes it difficult to edit because you cannot see the entire description while editing.
Using Inventor 2013
Inventor 2014 crashes when executing revision table edit. This started after installing windows 7 SP1(x64) and SQL server 2012 express (x64).
View 1 Replies View Relatedselect all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
Inventor 2012, DWG drawing file Revision table - iLogic
Using iLogic, how to extract data from "Design Tracking Properties" in a revision table to an embedded or linked Excel spread sheet? Design Tracking Properties like "Today's Date", "Designer", "Checked By", "Eng Approved By" are of great interest.
Is it possible to create a text block attribute in part sketch mode?
View 2 Replies View RelatedI am trying to create some new templates for 2013 and I'm trying to figure a way to get the model revision number to populate into the drawing's iproperty revision number so that they will match upon save. I'm trying to do this by creating an ilogic rule but I don't see a system property in the idw that will allow me to access the 3D model iprops. I am going to Event Trigger the rule to run Before Save. Is this possible?
On the drawing border I have created a formatted text box that is built as:
Type: Properties - Model
Property: Revision Number
It simply pulls the data from the models revision number and populates the text box. I need this same thing to happen but rather than populate into a text box I need it to populate into the drawings revision number iprop.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
I have a number of drawings that i need to change the revision numbers, insert the date, the reviewer, etc.... I have been doing this manually but it takes heaps of time. Is there an easier way to copy and paste multiline attributes from one block to the same block used in other drawings (each drawings has the same block and attribute titles). One problem is that i cant simply copy the entire block as the drawing number, reviewers, titles etc are different in each drawing.
View 1 Replies View RelatedI wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies View RelatedI have an Inventor 2009 idw template that I have setup for export to AutoCAD. Once it's in AutoCAD format I have to run a script file from my customer that checked attributed fields in certain blocks in the AutoCAD file. In IV2008 the title block names were changed on export to adding "title blocks" to the beginning. Which I delt with. But now in IV2009 all the TAG names in each block are also renamed on export to adding "_001" to the end of each TAG name. Is there any way to keep the same naming on export to AutoCAD for blocks and sketch symbols so I don't have a write a bunch of script files for the AutoCAD file?
View 5 Replies View RelatedIs it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
i have a drawing boarder that is a block with enter-able text fields for drawing revision etc but for some reason the order in which you would enter the rev's 1,2,3, etc is the wrong way round in the enhanced attribute box. So when i click and start typing i end up with 3,2,1 in the rev boxes.
View 9 Replies View RelatedIs there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
I have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
I just recently received error from one of our customers regarding this kind of error (see attachment).
They are trying to reuse their own customized template to other PCs, they are copying these files to the template folder of Inventor. This method is successfully done in all of their pcs except for the two.
I'm creating a block with a block attribute.
In the blockeditor I can change the draworder so the attribute is partly under some lines. But the draworder in the blockeditor of the attribute doesn't work in the normal modelspace; the blockattribute is allways on top.
When I say "Global" I mean every instance in the drwaing, regardless of model/paper space.
Example: I have a roadway drawing with 12 Layouts. The Title Blocks are in the layouts (in paperspace). The text in the titleblocks (sheet name, dwg name, drwn by, date, revisions, etc), are attributed blocks.
I need to add the same revision to every sheet.
How can I globally do this, all in one shot. Seems like something I should be able to do. The old command line AttEdit command does not do it. It only works on blocks in the current space.
Find could do it if there was something in them but the attributes are empty.
I use AutoCAD for mac 2013. I'm a interior design student and I have a question regarding editing 3D Blocks which can be downloaded from the web.
If I download a 'free' 3D Block, is it possible to edit the block in a way which removes the 'original origin' of that block?? I have tried exploding the block and redefining it in a wblock file and changing the layer. But I'm not sure if this process has removed the original information which it came from...
If there is a way to remove the origin (that is came from the web).
I need to open a drawing and read the block attributes and find a block with name "ABC" and attribute named "Text" in "ABC" block. for which i am using the below code which is working perfectly.
Try AcadApp = GetObject(, "AutoCAD.Application") Catch ex As Exception AcadApp = CreateObject("AutoCAD.Application") End Try AcadApp.Visible = True Try AcadDoc = AcadApp.Documents.Open(DWGName, True) RichTextBox1.AppendText(" - Opened File Successfully" & vbCrLf) Me.Refresh() Catch ex As Exception RichTextBox1.AppendText(" - Can not Open this Drawing" & vbCrLf) Me.Refresh() Exit Function End Try Dim Obj As Object For Each Obj In AcadDoc.ModelSpace If Obj.ObjectName = "AcDbBlockReference" Then RibbonLabel1.Text = "Find Block: " & Obj.Name Me.Refresh() ' Check for attributes. If Obj.HasAttributes Then Dim AttList As Object Me.Refresh() If Obj.Name.ToString.ToLower = "abc" Then ' Build a list of attributes for the current block. AttList = Obj.GetAttributes ' Cycle throught the list of attributes. For _i = LBound(AttList) To UBound(AttList) ' Check for the correct attribute tag. If AttList(_i).TagString = "Text" Then return AttList(_i).TextString.ToString End If Me.Refresh() End If Next End If End If End If Next Obj
But i want to know whether is there any way to get the block named "ABC" directly without looping through all the objects.
I have a block content many attribute. When I'm create the block whit this many attribute, the order of this attribute is not properly. I know autocad have a command to class this many attribute in order but i search it and i don't know where is it.
View 1 Replies View RelatedI need to get the Attribute Collection of a named block which is not been placed in the drawing, but it does exist
Dim paaltype As String
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
Dim acDocEd As Editor = acDoc.Editor
Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()
paaltype = "paal01"
Dim acBlkTbl As BlockTable
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead)
If acBlkTbl.Has(paaltype) Then
‘block exist, how to get the attributecollection
End If
acTrans.Dispose()
End Using
How can I add an attribute to a block without the other attributes to move from their position. With the ATTSYNC belongs unfortunately not because the old attributes moved back to the original places that I will not.
View 9 Replies View Related