AutoCAD Inventor :: Reset Revision Block Data?
Oct 19, 2012
We frequently will create a new part and drawing based on an existing drawing to save time recreating views and re-dimensioning the entire drawing. This is done by using Design Assistant to copy the idw and ipt file to a new name.
The only problem we have experienced with this workflow is that the revision history for the old drawing is maintained in the new file, and there doesnt seem to be a way to reset it. This also causes us a problem if a drawing needs to be changed from numeric to letter indication of revision level.
Any way to reset the revision history so that a new table can be started from scratch?
View 1 Replies
ADVERTISEMENT
Feb 7, 2013
When a revision is created we bump up the revision using a letter. If there are multiple changes done to the drawing during that revision we will use a number to indicate that. For instance; if I have 3 changes to the drawing for Rev C they will be tagged as C1, C2, C3. However the drawing Rev in the title block should only display C.
Is there a way to make the revision block do this? Right now we place in the DESCRIPTION a note like 1. Added Dim in zone E10. 2.Text was "Flat" in zone H3. But this for goes the ZONE column that comes with the revision block and makes it difficult to edit because you cannot see the entire description while editing.
Using Inventor 2013
View 2 Replies
View Related
Jul 24, 2012
How can (or can I), set a revision block to be able to edit the attribute when I save an Inventor DWG as an AutoCad DWG. ex. we create drawings in Inventor, save as dwg and send for approval. Our manager is unable to edit the attribute in the revision block without exploding it.
View 9 Replies
View Related
Jun 21, 2012
Inventor 2012, DWG drawing file Revision table - iLogic
Using iLogic, how to extract data from "Design Tracking Properties" in a revision table to an embedded or linked Excel spread sheet? Design Tracking Properties like "Today's Date", "Designer", "Checked By", "Eng Approved By" are of great interest.
View 4 Replies
View Related
Jun 5, 2012
I am trying to create some new templates for 2013 and I'm trying to figure a way to get the model revision number to populate into the drawing's iproperty revision number so that they will match upon save. I'm trying to do this by creating an ilogic rule but I don't see a system property in the idw that will allow me to access the 3D model iprops. I am going to Event Trigger the rule to run Before Save. Is this possible?
On the drawing border I have created a formatted text box that is built as:
Type: Properties - Model
Property: Revision Number
It simply pulls the data from the models revision number and populates the text box. I need this same thing to happen but rather than populate into a text box I need it to populate into the drawings revision number iprop.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
View 7 Replies
View Related
Nov 27, 2013
i have a drawing boarder that is a block with enter-able text fields for drawing revision etc but for some reason the order in which you would enter the rev's 1,2,3, etc is the wrong way round in the enhanced attribute box. So when i click and start typing i end up with 3,2,1 in the rev boxes.
View 9 Replies
View Related
Dec 12, 2013
All block containing Circle, Spline or Ellipse have Linetype Reset when they are scaled in a drawing who contain more that 1 ViewPort. (tested with CAD 2010 -> 2014)
View 9 Replies
View Related
Aug 13, 2012
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
View 5 Replies
View Related
May 30, 2013
I have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
View 2 Replies
View Related
Aug 19, 2013
I have three rules in our stamp to the revision date and revision number to fill in.
Along our project number should include the revision letter stand out with the latest date.
Now I would like to see if the date entered by the revision number and revision letter that the letter therefore become filled in along the project number.
If the next date is fill in with the letter, that letter must be completed along the project number The dates and letters are "Prompted Entry" or do i need other properties.
Can this be done with iLogic?
Youre drawings are as good as the symbols that compleet them.....
View 1 Replies
View Related
Jul 17, 2013
Is there a workaround to delete the last revision row with the edit icon (I've put in by mistake and would like to remove)According to Autodesk HELP:
"Note:The active row is always the most recently added row to the revision table. It is denoted by an edit icon and cannot be deleted."
View 5 Replies
View Related
Jul 25, 2012
We revise multiple items on a drawing at the same time. When we do this we add a number next to the revision letter to reference in the revision block. For example if we are on rev B and we revise 3 items we would need tags that say B1, B2, B3. We can edit the tags to reflect this, but I was wondering if there is any way to get the tags to do this automatically without using code.
View 2 Replies
View Related
May 6, 2013
I'm simply trying to delete the revision table if it exists on a drawing. I did find where you can't do anything with Rev Tags with the API, but what about the Actual Revision Table?
Trying to get this to work;
If iProperties.Value("Project", "Revision Number")>0Dim oRevTable as RevisionTableoRevTable = ActiveSheet.Sheet.RevisionTable.Item(1) oRevTable = nullRevisionTable
View 2 Replies
View Related
Oct 11, 2011
I 'd like to keep the old Revision table rows available , but off the sheet rather than delete all the rows & start from , let's say, Rev 10.Is this possible in 2012?
Inventor Suite 2013 Ultimate
View 6 Replies
View Related
Nov 8, 2011
I have a question about the revision tag. It's seam that we can not change the size of the balloon or Triangle. But we can use a user symbol. But we can make this choice only after placing the tag. see picture.
My question is : It is possible to make this choice in the stylelibrary ?
View 2 Replies
View Related
Aug 28, 2013
I have never attempted any i-logic before and this may be running before I can walk, but I was wondering if this premise even sounded do-able. I would like to create a rule to set the last row of my revision table to all static values, and then add a row.
View 5 Replies
View Related
Nov 16, 2012
I'm trying to write a routine to work with a non vault revision table. I'm working with Vb .net & Inventor 2012. I am working with sheet scope tables.
From the inventor dialogue box there are two commands to add rows to the table.The insert row command. Which inserts a row in the table.
The add row command which inserts a row set the sheet revision property & sets the new row active.
I have tried to insert a new row with the following code & make it active but this does not work. Is is possible to create a new active row through the api? The new row gets added but cannot get the new row to become the active row.
dim new_row as RevisionTableRow
new_row = revtable.RevisionTableRows.AddCustom(table_length -blank_rows) ' This works as expected.
new_row.IsActiveRow = True ' this has no effect.
View 1 Replies
View Related
Sep 30, 2013
How to add in revision clouds in Inventor 2014? I want to draw in drwaings revision clouds.
View 9 Replies
View Related
Sep 17, 2013
Is there a way to add a revision row with I-logic?
Inventor 2013
View 2 Replies
View Related
Dec 3, 2012
I tried to add a revision table by vba routie. useing fllowing code
Dim oRevStyle As RevisionTableStyle
Set oRevStyle = oDoc.StylesManager.RevisionTableStyles.Item("Revision Table_NEW")
Dim oRevTable As RevisionTable
Set oRevTable = oDoc.ActiveSheet.RevisionTables.Add2(oPoint, , , , , oRevStyle)
It adds revision table is not shown correct in the drawing. I have to manually select certain style in the drawing.
I try doc.update or view.update. it doesnt work.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
View 4 Replies
View Related
Oct 2, 2012
I'm looking at a way to reduce the size of the revision tag in inventor, cause its size doesnt fit in our drawings, we have the habit to put as much info as possible on the sheets but when we get a revision the tag is too big..
Is this possible?
Currently using Inventor2012 & soon will be using 2013
Inventor 2013
View 8 Replies
View Related
Oct 29, 2013
I create all of the shop drawings for our company and I'm trying to find out the best way to track revised drawings. A lot of times I create a drawing and there are several revisions. The shop works off of a high res. pdf I print for them and we also have a signed version from the customer. Once in a while the shop gets their hands on an earlier revision and builds from it. The signed version from the customer is crappy at best and sometimes faxed so working from it is useless.
I have a space where I can manually enter the REVISION # on the drawing but sometimes I forget to update it. If I use an automated timestamp <timestamp> for the drawing with date and time (I've seen this done) or some iLogic code, would this show when the document is printed, opened or saved?
View 4 Replies
View Related
Jan 9, 2013
Is there a way to have a lowercase revision number in a drawing (in fact, it's not really a number but a character).
All I can set is uppercase format or numbers.
View 3 Replies
View Related
Jun 11, 2013
Anyway to change the Offset from the out of the revision tag/box edge to the edge of the text instead of leaving such a large gap I want to make it smaller less obtrusive(smaller) and I have tried changing the text size but it doesn't change the offset it changes the text size to small but the outline still remains the same size , I cannot find a location to make a new style that also ties to the revision annotation table in the drawing , I have attached a sample for you to look at what I am trying to change.
Using Inventor 2012
Vault 2012
View 4 Replies
View Related
Sep 4, 2012
The revision Number in the assembly drawing is populated by the Model Iproperties revision field. How can I get it to show the Drawing properties revision number? I need my vendors to see the drawing number and associated revision levels of the drawings which make up the assembly not the Models which they may never see. There are many times we update drawings with notes that do not effect the underlying model but still reflect a revision change in the drawing so I need people building assemblies to make sure they are building the assembly components to the correct revisions.
View 1 Replies
View Related
Mar 13, 2012
Im running Inventor 2012 on a 64 bit windows 7 machine.
Having just newly discovered that Inventor has a Revision Cloud command, I read through the forums and found out that I had to install the two SKD .msi files named DeveloperTools & UserTools, which I have done. I also read that I have to execute the RegisterGeneralTools.exe which I have also done. I've rebooted and restarted Inventor numerous times thinking that my Add-Ins tab will show up with my newly acquired Revision Cloud command in Drawing Tools but to no avail.
Im coming from Inventor 2009 so I'm not sure if the Add-Ins tab is now supposed to be the Add-In Manger but from what I seen I should have a tab just right of "Get Started" and should include Drawing Tools and General Tools.
View 2 Replies
View Related
Jul 7, 2011
My question: We want to use iLogic to save a PDF-file of the DWG-drawing every time we hit "save". We now use the following iLogic
Spoiler (Highlight to read)oPath = ThisDoc.Path PN = iProperties.Value("Project", "Part Number")
PDFAddIn = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")
oDocument = ThisApplication.ActiveDocument
oContext = ThisApplication.TransientObjects.CreateTranslationContext
[Code] .....
View 9 Replies
View Related
Nov 16, 2012
Any method to get the insertion position of the revision tags on the current sheet or sheets in current drawing through API (vb.net)?
View 4 Replies
View Related
Aug 3, 2012
way to set the default to be 0. When we release a drawing we have it as Rev 0, Released for Fab..
It's a pain having to change it from 1 to 0 for every idw.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
View 6 Replies
View Related
Jan 12, 2011
I Have problem to change Revision Tag Triangle size. I need to suit the triangle size to the proportional size (as shown on attachment).
View 8 Replies
View Related
Nov 20, 2013
is it possible to do an individual revision table for multiple sheet drawings. if you typed in description 'sheet 3 nut changed from m3 to m5......etc' then all the bunf would carry over to every sheet
View 1 Replies
View Related
