AutoCad 2D :: Edit Attribute Order In Block - DWG
Jan 31, 2013
I am updating a block with attributes, adding some new, removing some old and moving the rest around. As can be expected, when I am done and save the block and insert it the order of the attributes are all messed up.
Now, as far as I can understand, BATTMAN changes the order of the attributes all right - but only in that drawing where the block is inserterd in. I want to change the order permanently. This block is to be used on pretty much all of our projects, I can't have to run Battman all the time!
View 5 Replies
ADVERTISEMENT
Apr 15, 2011
I'm trying to build a routine for my job to insert a block which consists of 3 single line variable attributes in a specific order. I need to be able to do this on many different drawings, and I would like to share this ability with my coworkers. Using the DesignCenter is not an option. In order to do this, I saved a drawing which consisted of the three attributes in the layout in which I need them to appear, however the order in which it prompts me to enter them is reversed. I already know how to set the order of attributes in an EXISTING block definition using the BATTMAN command, as every time I run the routine again, I'm redefining the block definition.
I'm not sure if it's important to know this, but the routine consists of a button with the following macro:
(command "-insert" "c:/folder/drawing.dwg" (getpoint "
Choose Insertion Point: ") (* (getvar "ltscale") 2) (* (getvar "ltscale") 2) "0");
EDIT: It works perfectly fine on my home computer, though my home computer runs an older version of acad.
View 4 Replies
View Related
Aug 2, 2008
I have a block with an attribute and need to change the first three characters of each to a different two characters. I recall my instructor once showing me how i could do this easily without having to click on each block to change the attribute.
View 2 Replies
View Related
Jul 24, 2012
How can (or can I), set a revision block to be able to edit the attribute when I save an Inventor DWG as an AutoCad DWG. ex. we create drawings in Inventor, save as dwg and send for approval. Our manager is unable to edit the attribute in the revision block without exploding it.
View 9 Replies
View Related
Jan 26, 2012
I'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies
View Related
Jun 22, 2012
I have only one user with this problem. He tries to edit an attribute block and when he selects one of the values and erases it the default value doesn't erase. He then has to enter some text and erase that and it works.
View 3 Replies
View Related
Dec 18, 2013
How do I prevent "Edit Attribute" pop up prompt for entering text for an attribute in a block? I just want the same attribute text each time I insert the block, I don't want the "Edit Attribute" popup window to re-enter the same text every single time.
I do want the attribute text so mirror won't reverse it (I just want permanent attribute text).
First I delete the old regular text.Second I give the block an Attribute Definition Tag and enter the text I want in the Tag blank. Third I center where I want the text. Forth I save the block.
When I finally insert the block I get the "Edit Attribute" pop up to renter what I want it to say. Like I said earlier, I don't want this pop up, I just want to enter the text once and that's it. Also if I enter nothing in the "Edit Attribute" pop up, then no text will show on the block.
View 3 Replies
View Related
Aug 31, 2012
select all blocks on certain layers in a drawing, check attribute CIRCUIT in each block if it starts with MS then attribute CONTROL = switched. I hope thats clear enough the way
(defun c:control()
(graphscr)
(Setq sc (ssget "X" '((0 . "INSERT")
[Code].....
View 1 Replies
View Related
Jul 3, 2012
I wanna transfer my attribute block values to another attribute text blocks , is there any lisp for that?
Is there a possibility for sum tag values of choice attribute blocks to inside of another attribute text block ?
View 2 Replies
View Related
Oct 5, 2012
What I really want to do is on our fire alarm blocks we have 3 different attributes one for the address, the candela and one for misc info. I want to make an attribute that takes the number from the candela (15,30,75or 110) and change a different attribute to a value depending on which candela we use (such as 15=.078, 30=.113, 75=.195 or 110=.259). But I don't want the .078,.113,.195,.259 to print out on paper, I want to export block information excel file so I can add up all values.
View 2 Replies
View Related
Dec 9, 2011
How to change the attribut order in the question sequence.
View 6 Replies
View Related
Aug 13, 2012
Is it possible, via whatever methods (lisp?) to be able to have a premade block with an attribute and insert it into a drawing then assign a value to it by selecting another existing block in the drawing and using one of its own attribute’s values?
For example, say I have a block representing a telephone and it had an attribute called "PhoneNo" and I inserted it into a drawing showing an office floor plan that had blocks in each office space that are telephone junction boxes with attributes "PhoneExtension". I would like to be able to autocomplete the entering of the “PhoneNo” data by selecting one of the telephone junction boxes in the drawing and using its attribute’s value.
View 5 Replies
View Related
Sep 6, 2012
Autocad 2011, Electrical package,
I have an existing title block a few text attributes, to which I wish to add a watermark. I have added it in the block editor as a normal attribute, with the same details as the other attributes that work, only a different tag name. It has a default value, "DRAFT" and is tagged "WMARK". It works fine in the Block Editor, and If I test the block I can edit it to display whatever I want, but if I save the block and open it from Autocad proper, the attribute is not in existence, either as a default value, or editable from block properties, attribute editor or title block editor, whereas all of the other attributes are there. I have used BattMan to verify the settings of the attribute, and the only difference is that the others all have "L" in the "Modes" column, but I think that means that their position is "locked" whereas my new attribute is justified "aligned" therefore cannot be "locked" (This is some assumption on my part, as the documentation on the "Modes" column is almost non-existent). I cannot afford to waste much more time on this issue, as the boss is breathing down my neck, but editing watermarks on every drawing after every revision is frustrating, when it could be an attribute that is editable from the title block editor.
View 9 Replies
View Related
Feb 12, 2012
I need to match few attribute values from one block to different block. I download a lisp file called; ca.lsp which can match the single attribute value. I modified it for more than one attribute value matching. It is ok but still wish to overcome two issues for batch prcess
1. picking up the blocks by selection
2. click the alternative block numbers of times to match the numbers of attribute values I needed.
How to modify this lisp I can run it by block name selections instead of picking selection which enable me to run batch process for numbers of drawing? That will be good...
Lisp & Demo file attached (Match attribute value, A, B & C to Attribute 1, 2 & 3).
View 3 Replies
View Related
Nov 8, 2013
Is there a way that I can create a block with text ('A') and when I insert the block and populate the block another block block will update also? I am wanting to create a block for x-sec flags, and detail callouts that update their detail titles.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
View 6 Replies
View Related
May 30, 2013
I have 2 drawings with the following content :
Drawing 1 : Contains tree blocks that have a specific scale dependant on the tree size
Drawing 2 : Contains a block with just a point and attribute data about the tree (name, size etc.)
This block is approximatly at the same location as the tree block (0,1 m precision)
Problem I want to join these two items together. In other words, in the tree block that is scaled correctly i want the attribute data with the name, size etc. These blocks don't have a corresponding unique number or something like that.
View 2 Replies
View Related
Feb 28, 2012
Is it possible to create a text block attribute in part sketch mode?
View 2 Replies
View Related
Jun 10, 2013
I'm creating a block with a block attribute.
In the blockeditor I can change the draworder so the attribute is partly under some lines. But the draworder in the blockeditor of the attribute doesn't work in the normal modelspace; the blockattribute is allways on top.
View 9 Replies
View Related
Sep 13, 2013
in 2000 I was able to discover a command that allowed you to renumber a large selection of blocks in order. I have been searching for that command again every time I need to renumber a floor plan due to the addition of new spaces. What this command was and if it is still available in 2010? It would save a ton of time!
View 2 Replies
View Related
Apr 18, 2012
When I say "Global" I mean every instance in the drwaing, regardless of model/paper space.
Example: I have a roadway drawing with 12 Layouts. The Title Blocks are in the layouts (in paperspace). The text in the titleblocks (sheet name, dwg name, drwn by, date, revisions, etc), are attributed blocks.
I need to add the same revision to every sheet.
How can I globally do this, all in one shot. Seems like something I should be able to do. The old command line AttEdit command does not do it. It only works on blocks in the current space.
Find could do it if there was something in them but the attributes are empty.
View 3 Replies
View Related
May 23, 2013
I use AutoCAD for mac 2013. I'm a interior design student and I have a question regarding editing 3D Blocks which can be downloaded from the web.
If I download a 'free' 3D Block, is it possible to edit the block in a way which removes the 'original origin' of that block?? I have tried exploding the block and redefining it in a wblock file and changing the layer. But I'm not sure if this process has removed the original information which it came from...
If there is a way to remove the origin (that is came from the web).
View 9 Replies
View Related
Sep 15, 2011
I have just upgraded to 2012 and I am having a few issues with the title blocks I am creating. For some reason everytime I add attributes to the block they never come out in order. For example I create the title page, add the attributes using ATTDEF (job name etc) then I create the block and check my attributes using BATTORDER, I can arrange them using the up/down buttons which is fine. But as soon as I try to edit the attributes outside the block editor they are all out of order again! I have tried making the attributes in and outside of the block editor with no avail! And to make matters worse I have a jumpy mouse.
View 9 Replies
View Related
Dec 17, 2013
I Xreffed my Profile Border (title block) into paper space then xreffed my profile.dwg into the model space. When I plot, the gridlines from the border plot on top of the profile lines. Is there way to change the plot order of the Xref files?
View 4 Replies
View Related
Feb 2, 2012
I need to open a drawing and read the block attributes and find a block with name "ABC" and attribute named "Text" in "ABC" block. for which i am using the below code which is working perfectly.
Try AcadApp = GetObject(, "AutoCAD.Application") Catch ex As Exception AcadApp = CreateObject("AutoCAD.Application") End Try AcadApp.Visible = True Try AcadDoc = AcadApp.Documents.Open(DWGName, True) RichTextBox1.AppendText(" - Opened File Successfully" & vbCrLf) Me.Refresh() Catch ex As Exception RichTextBox1.AppendText(" - Can not Open this Drawing" & vbCrLf) Me.Refresh() Exit Function End Try Dim Obj As Object For Each Obj In AcadDoc.ModelSpace If Obj.ObjectName = "AcDbBlockReference" Then RibbonLabel1.Text = "Find Block: " & Obj.Name Me.Refresh() ' Check for attributes. If Obj.HasAttributes Then Dim AttList As Object Me.Refresh() If Obj.Name.ToString.ToLower = "abc" Then ' Build a list of attributes for the current block. AttList = Obj.GetAttributes ' Cycle throught the list of attributes. For _i = LBound(AttList) To UBound(AttList) ' Check for the correct attribute tag. If AttList(_i).TagString = "Text" Then return AttList(_i).TextString.ToString End If Me.Refresh() End If Next End If End If End If Next Obj
But i want to know whether is there any way to get the block named "ABC" directly without looping through all the objects.
View 2 Replies
View Related
Nov 7, 2011
When I input data into title block I want to go Field txt->custom and have some rows multiple, in repeating order, I don't have control over that.
Example:
I want:
first row: rev #,
second row: by,
third row rev #,
fourth row: by,
and so on.
Right now I created prompt line "rev (1)", "by (1)", "rev (2)" and so on, but this still wont show the right order in custom props.
View 1 Replies
View Related
Feb 21, 2012
I have a block content many attribute. When I'm create the block whit this many attribute, the order of this attribute is not properly. I know autocad have a command to class this many attribute in order but i search it and i don't know where is it.
View 1 Replies
View Related
Apr 19, 2011
I need to get the Attribute Collection of a named block which is not been placed in the drawing, but it does exist
Dim paaltype As String
Dim acDoc As Document = Application.DocumentManager.MdiActiveDocument
Dim acCurDb As Database = acDoc.Database
Dim acDocEd As Editor = acDoc.Editor
Using acTrans As Transaction = acCurDb.TransactionManager.StartTransaction()
paaltype = "paal01"
Dim acBlkTbl As BlockTable
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead)
If acBlkTbl.Has(paaltype) Then
‘block exist, how to get the attributecollection
End If
acTrans.Dispose()
End Using
View 2 Replies
View Related
Sep 10, 2012
How can I add an attribute to a block without the other attributes to move from their position. With the ATTSYNC belongs unfortunately not because the old attributes moved back to the original places that I will not.
View 9 Replies
View Related
May 9, 2011
I wan't to append a new attribute to a new block. But I get an error that there is no database. The loaded file has no attributes
Dim mDialog As New frmPaalDefinitie()
For Each item In lvPalen.Items
mDialog.tsPaal.Items(item.imageindex).enabled = False
Next
mDialog.ShowDialog()
If mDialog.DialogResult <> Windows.Forms.DialogResult.OK Then Exit Sub
[Code] ........
View 4 Replies
View Related
Aug 9, 2012
I know how to get/set attribute within loop at block's AttributeCollection.But I'm wonder if I can set value for specified attribute without loop. Or I always have to iterate on each attribute in block's AttributeCollection?
View 9 Replies
View Related
Apr 20, 2011
How to access the BTR, read and write BRef, attDef, AttRef etc. But this has me stumped. There are a few different examples but can’t find anything that works and don't know why.
I have inserted a block in modelspace, I have the BlockRefID and now want to change its attribute values. This finds the attributes tags but doesn’t write the sValue. Why it isn’t writing the value to the block.
Public Sub ChangeAttributeValue(ByVal BlockRefID As ObjectId, ByVal sTagName As String, ByVal sValue As String)
Dim doc As Document = Application.DocumentManager.MdiActiveDocument
Dim db As Database = doc.Database
Dim tr As Transaction = db.TransactionManager.StartTransaction()
Dim br As BlockReference = DirectCast(tr.GetObject(BlockRefID, OpenMode.ForWrite), BlockReference)
[code]........
View 7 Replies
View Related
