AutoCad 3D :: How To Edit Block In A Way Which Removes Original Origin Of Block
May 23, 2013
I use AutoCAD for mac 2013. I'm a interior design student and I have a question regarding editing 3D Blocks which can be downloaded from the web.
If I download a 'free' 3D Block, is it possible to edit the block in a way which removes the 'original origin' of that block?? I have tried exploding the block and redefining it in a wblock file and changing the layer. But I'm not sure if this process has removed the original information which it came from...
If there is a way to remove the origin (that is came from the web).
On my civil drafting project plate 1 I am trying to insert my Tree block and i type the coords in and it ends up way off screen but I insert a point at the same coords and it goes right where it needs to. What am I doing wrong?
Figured it out on my own by placing my tree on origin 0,0 and then creating block. not sure why that is the way it is but I got it to work for what I need it to do.
I got too smart for myself today in bringing an old drawing up to current standards...Everyone seems to want their block attributes to be zero - I have blocks where the attributes are best when they match the rotations of each blocks.
I have an old drawing that was rotated (as it should be) at approx 2deg.
I used a lisp routine to global edit all the blocks that needed to be at zero. BUT for some reason (and after hundreds of blocks were corrected), I noticed I now have two blocks that should NOT have been in the set have had their attributes rotated to zero....and the attributes should be at the same rotation as their block's rotation.
Because those two blocks have a fixed tic mark, I can click on the mark to see what the block rotation is, then rotate its attribute to that rotation, but I have hundreds of blocks! One-at-a-time sucks....
Any chance there is a GLOBAL way to edit an attribute rotation to match its own block's rotation?
I've written a method that creates a block definition and inserts one instance the newly created block definition. The block is comprised exclusively of lines and text entities. When the method is completed, all entities appear correctly on my machine.
However, when other users try to run the routine on their machines, the lines appear correctly but the text entities all appear positioned at the block insertion's origen. And the other users must manually regen the drawing after the command is run to trigger the text entities to move (or appear to move) into their proper location.
Though it wasn't necessary on my machine, I tried adding the following line as the last instruction in my command-method:
_drawing.Editor.Regen();
But even that last line's programmatically-triggered regen didn't solve the text location issue for my users. They still have to manually regen.
I also ensured that all (or most) of a test user's system variables were set to the same values that I use (via Express Tools export & import). But that didn't work either.
when i export (or explode) my plan every window, doors etc... split in more "under-blocks", and that's ok. but i have a problem with the windows: after the explode command, one of the blocks inside (the one that shows the opening side) "jump" in the 0,0,0 coordinates point, but all the others remain in the right position.
PS: i think the problem is not in the window-block, because i tried it in another old file, and it works. and the autocad option are also always the same.
we have on company drawing title block the date created field. . . . but when the file is being transfered and "save" it shows the present day of saving. . . is there any lisp that when used, it will show the original date its created. .?
Lost the ability to double click on blocks and mtext to bring up the editor box in my drawings. I've tried all settings that i know of and have had zero results.
I would like to know, how to access the GDT tolerance block in Autocad, I have a requirement, that I need to take the values from Xl and paste it in the tolerance block.
I create schematics of lighting control systems for my job, the controllers on my schematic have multiple outputs which I need to modify so they're relevant to the job.
At present I have all my blocks in a tool palette and just click and drop to add them to my schematic.
How can I tailor the text of a block without exploding it? Is this even possible?
I'm using acad 2010. Twice now this has happened in two days. Using edit block in place. I edit the block, pick save and gone, Acad just closes down, no warning no nothing.
Basically, I have a dynamic block with a distance parameter attached to an array command. The array command has a column distance of 30 inches between columns. I need to edit that distance. Is there a way to do it or do I have to start over? I have to start over, I might cry a little bit. There are a lot of other actions compounded on top of this one.
I'll attach the file, but if you edit it for me, how you did it so I'll know? Tech a man to fish and all that nonsense.
Oh, and I'm using 2012 vanilla AC, which has a different block editor than most other versions, so beware. Oh, and I don't use ribbons..
I am updating a block with attributes, adding some new, removing some old and moving the rest around. As can be expected, when I am done and save the block and insert it the order of the attributes are all messed up.
Now, as far as I can understand, BATTMAN changes the order of the attributes all right - but only in that drawing where the block is inserterd in. I want to change the order permanently. This block is to be used on pretty much all of our projects, I can't have to run Battman all the time!
I use refedit quite a bit to edit blocks in-place, but can't find a way to do this with dynamic blocks without breaking the link to the original definition and creating a new block definition.
Is there a setting I can change, or another way to edit a dynamic block in-place?
I have multiple dynamic blocks that I would like to add descriptions to. If I have a block in a tool palette, I can add a description by right clicking and selecting "Properties." But I would like to add a description that shows up in the Design Center as well.
Is there a way to do this without redefining the block? Exploding makes me lose all of my dynamic properties, and I'd hate to have to recreate them.
I'm using LT 2008, by the way, so I don't have ref edit or any of that other cool stuff.
I think a setting changed on my pc this weekend. I used to be able to double click the block and edit the attributes in the editor. Now, I can't change any values. I can only get to the dialog that shows info on the block and when I right click, I only have a few commands come out of the flywheel. I rebooted, but no go.
A drawing contained several layers, some of them locked, others de-activated during ongoing works. I wanted to edit a block used in the drawings. I selected the block and opened the block editor. After deleting some elements of the block, I had to explode a couple of elements from the block to delete further details. I selected all the remaining ones. Than I hit the toolbar button MAKE BLOCK, next I closed the block editor.
Now all of the model space appears empty except of the ONE block I edited, everything else disappeared. How can I undo the changes and bring the proper drawing back?
I tried the procedure on an earlier version - minor changes don't cause any harm to the file. But once I exploded parts of the block during editing, the error appears. When I lock up the block list, the edited one shows a sign saying "Dynamic Block" which may be the root of all evil (as the unknown is always the evil).
How to recover my drawing? Getting the backup from tape takes ages, deadline is close.
batch-editing of my titleblock. I have one drawing with 20 layouts. In each layout I have inserted our titleblock which has attributes/fields. One of the fields is the drawing revision #. I would like to be able to update the revision # so that it automatically changes it in all of the layouts (currently I have to manually change each instance).
I am inserting a block (strSectionBlk) into an AutoCAD 13 drawing using VB .NET. This block has an attribute with tag "FAB_HEIGHT" and I want to edit its string to the value of a variable "strFabHeight" at the time of the insertion of the block. The insertion of the block is fine but I've failed to edit the attibute.
Public Sub InsertSection() 'Call the Function that decides the name of the head section block strSectionBlk getSectionDwg(strModel, strHeadType) 'Start the database Dim db As Database [code]....
I am inserting a block that has one attribute with tag "FAB_HEIGHT". I have not been successful in editing this attribute.
Public Sub InsertSection() 'Call the Function that returns strSectionBlk (the Head Section drawing) getSectionDwg(strModel, strHeadType) 'Start the database Dim db As Database db = HostApplicationServices.WorkingDatabase() [Code] .....
I"m using LT2011 on a WIN7 machine.After blockedit the cursor will freeze for a short period about every 2 seconds.When this is happening, there are also more disk accesses.
Re-starting the application stops this frustrating behaviour until I edit another block.Are there any updates that may deal with this problem?
I would like to delete the horizontal line (white line) from our sanitary profile structure. I have outlined it with a yellow cloud. I want to permanently delete it from our style. I can access the style in the Prospector but cannot figure out how to edit the block to delete the line in question.
I check online that AutoCad should have a 'grips' function, but I cannot use it because 1) I cannot find the grips and 2) I want to move the hole into an accurate position. I want to do the following simple task. Please first read the attached picture. Assume now I want to edit 3D model by changing the hole center to another location and double the radius. How I can do those? (I could not find any properties to edit)
I have a block with an attribute and need to change the first three characters of each to a different two characters. I recall my instructor once showing me how i could do this easily without having to click on each block to change the attribute.
I cannot edit any block attributes in my drawing. When attempting to do so, the command line states: "The object is on a locked layer". All of the layers in my drawing are unlocked, on and not frozen.
I have been using blocks for P&ID's for about 3 months now, and had no issues. But for some reason when insert a block now the attributes window does'nt pop up, so i can't edit the text ? The only way i have been able to get round this, is by using property inspector to edit the text
I would like to know how I can edit my Title Block at the bottom of my page. I used to be able to select it in the past when opening the new template file. However after I performed drawings in the model window and back to the layout, I cannot click or edit the field anymore. I tried highlighting using my mouse, shifting layers and exploring right click commands but nothing good came up.
Refer to the attachment what I mean. I am running AutoCAD 2013 and I am on the "AutoCAD Classic" theme.
I tried doing a search online and on the forum with keywords such as "edit title", "edit name" but nothing relevant came up.
How can (or can I), set a revision block to be able to edit the attribute when I save an Inventor DWG as an AutoCad DWG. ex. we create drawings in Inventor, save as dwg and send for approval. Our manager is unable to edit the attribute in the revision block without exploding it.
