AutoCAD Architecture :: Explode Window - Block Inside To Origin Point
May 28, 2013
when i export (or explode) my plan every window, doors etc... split in more "under-blocks", and that's ok. but i have a problem with the windows: after the explode command, one of the blocks inside (the one that shows the opening side) "jump" in the 0,0,0 coordinates point, but all the others remain in the right position.
PS: i think the problem is not in the window-block, because i tried it in another old file, and it works. and the autocad option are also always the same.
View 2 Replies
ADVERTISEMENT
May 30, 2012
I have a block containing several parts blocks. When I explode the main block all of the parts are exploded back to lines. I have used both "explode" and "xplode" and have the same results. How can I explode so I have my components as blocks?
View 6 Replies
View Related
Dec 15, 2013
explode xclip block while keeping the stuff inside the clip boundary as it is
View 9 Replies
View Related
Sep 20, 2011
How would I go about this. if a two blocks or polygons are overlapping area?
A good method or the algebraic formula for a function to tell me if a point is inside a polygon or block's area?
View 5 Replies
View Related
Mar 22, 2013
In AutoCAD Architecture 2012, is it possible to change the 3D window block from standard white color to another?
View 6 Replies
View Related
Aug 30, 2011
I created a dog leg laundry door and window and finally got it to work but when I open the door the window pane moves with the door, also the window does not show up in the plan view. The cut plan is set at 1400 and the window sill is at 1200.
Have a look at the dwg file
View 6 Replies
View Related
Jul 31, 2011
I have lots of block in a file in different places. How to change the base point of that block with out changing the position of that?
View 1 Replies
View Related
Nov 30, 2012
I have a block that i want to insert several times and revised each one to be different to do this i would have to insert it and rename the blocks that come in and then reinsert i would like to insert and have a lisp explode the main block and rename the other 2 blocks with a suffix at the end depending on how many times its in the drawing... can this even be done? My original block name that will be first inserted is "BENT PULLEY NOTES" it needs to explode after i drop it in and then there are 2 blocks within that called "Bent Pulley" and "Bent Pulley DYN" that i was hoping to keep the names but add a number at the end depending on how many are in the drawing already...
here is a lisp that i have found... it would work if i didn't have nested blocks and only wanted the one block to be insert and not explode...
(defun c:Test (/ e i name Bname )
(setq e nil)
(command "_.-insert" "Drawing1.dwg" pause "" "" "")
(if (setq e (entlast))
[Code] .......
View 9 Replies
View Related
May 23, 2013
I use AutoCAD for mac 2013. I'm a interior design student and I have a question regarding editing 3D Blocks which can be downloaded from the web.
If I download a 'free' 3D Block, is it possible to edit the block in a way which removes the 'original origin' of that block?? I have tried exploding the block and redefining it in a wblock file and changing the layer. But I'm not sure if this process has removed the original information which it came from...
If there is a way to remove the origin (that is came from the web).
View 9 Replies
View Related
Aug 22, 2013
is it possible to create a block so that the base point is the only snap point on the block?
In other words supose I have a block of a simple rectangle with the base point in the center.
If I try to snap to the block, I will be able to snap to all the corners, but not the base point. I know that i can put a point at the base point, but can I turn off the snap to the corners (just for the block) in other words, have an object that is unsnapable to without turning the snap mode off.
View 7 Replies
View Related
Dec 7, 2011
what would cause the origin 3d indicator in the graphical window to be enormous? I'm talking 4x normal size.
Also, in the sketch environment, the little green and yellow dots that represent sketch points are huge, and the grid has gone really small.
Have tried changing graphics mode to "Compatibility" and selecting "Software Graphics" - No change.
View 2 Replies
View Related
Jul 9, 2008
I'm trying to explode this block in a drawing i'm editing but autocad will not let me do this.
View 9 Replies
View Related
Jul 13, 2012
Is it possible in ACA2011 to explode a block, but control what layer the pieces go to?
I have a block for a closet rod and shelf , but it always has to be re-sized once in the drawing so i must explode it. since it was made on layer 0 it explodes to that layer and I have to change the items to the proper layer.
View 9 Replies
View Related
May 6, 2013
The screen shot below shows three coincident constraints and a projection icon on the origin.
looks like a projection icon - what does it mean?
I want to delete the three coincident constraints. But when I delete the coincident constraints there is no Sketch origin center point (the sketch origin center point is a square-yellow dot at the x-y intersection). How to delete or move the three coincident constraints with out deleting the sketch origin center point?
View 2 Replies
View Related
Oct 30, 2010
How do you hide the origin point using autocad ordinate dimensioning. When I zoom extents there is a point at the origin and is some way from the actual drawing?
View 9 Replies
View Related
Sep 10, 2012
The original drawing was created in Inventor but i've never had such a problem before. I've been revising a drawing and to revise, i need to move a block 50mm from its original position. It's not allowing me to do so though.
As soon as i select move...it goes into "not responding". I can't explode it either....i can explode everything in the model space and once....but this leaves all dimensions as lines arrows etc.
I've even taken the same block into the drawing....and move/exploded it without any problems. In the properties bar....they are exactly the same except for the coordinates!
The really annoying thing is....i can't even delete and replace as it keeps crashing! There aren't any constraints either.
View 9 Replies
View Related
Dec 6, 2012
This is probably very easy using ssget or something, but I don't know exactly how that works. All I need to do is to explode any occurrences of a block with a particular name.
View 7 Replies
View Related
Mar 28, 2013
where I have a drawing with 3D faces creating the Chassis of a desk, and the top and pulls were inserted from other drawings and are blocks. There are numerous drawings with this scenario and I am looking for a way to explode the blocks ONLY in the drawings without exploding the 3D faces as well. Then we'd like to purge the drawing of the nested blocks before saving it.
I'm hoping there is a solution that doesn't require us to open each drawing individually as there are hundreds of them...if not thousands. We didn't catch this 'mistake' until today and have created many, many product lines (started in November) with this issue.
View 5 Replies
View Related
Jun 14, 2011
is ter any way to explode a reference block
View 4 Replies
View Related
Sep 10, 2012
How to explode a 3d layout grid after creating it.
View 1 Replies
View Related
Apr 15, 2012
I have a C#-WPF-Application. In this application there is a list of blocks in my drawing. When I click one of these blocks in the listbox I have several button-functions.
One of them: Select the in the list selected block in the drawing.
Another: Explode the in the list selected block.
I found several topics with Selection, but none of them worked for me. I'm looking for a selection via ObjectId or blockname of a single block, in the most cases the selectionfilter needs an array(?).
View 9 Replies
View Related
May 16, 2012
I would like explode a block which still maintain all sub blocks' XDatamyBlockRef.ExplodeToOwnerSpace() The above code does the job. However I can not get the exploded collection
Use the following code I can get object collection but there is no XData for each sub block.
Dim colAssemblyEnt As DBObjectCollection = New DBObjectCollection() myBlockRef.Explode(colAssemblyEnt)
My question is how can I get the sub block collection with each block's XData?
View 5 Replies
View Related
Sep 7, 2011
how we can explode block with attributes and keep the text of attributes as is without changing to value
View 3 Replies
View Related
Jan 31, 2012
At my job, we are 15 drawers using acad 2008 and 2006. For some reson, on 1 computer, when the guy explode a block, acad delete that block insted exploding it. It make the just for some block, not all block. It make this with acad 2006 and acad 2008 but just with that computer.
View 4 Replies
View Related
Feb 27, 2011
I've been given a drawing to edit and the creator has long but left the company. I need to explode the block in order to carry out the necessary editing however I cannot explode the block as it is an MInsert Block. I've searched the forums but I haven't found anything relevant. I've gone through the list of blocks present in the drawing to check that the "allow exploding block" tab is checked however there is no block for the whole drawing.
Is there anyway to explode the block and if so how would this be done? These are the blocks properties:
Select objects:
BLOCK REFERENCE Layer: "0"
Space: Model space
Handle = 57a34
Block Name: "*U243"
at point, X=-4237700.3549 Y=-1887128.2335 Z= 0.0000
X scale factor: 1.0000
Y scale factor: 1.0000
rotation angle: 0
Z scale factor: 1.0000
Scale uniformly: No
Allow exploding: Yes
And yes I can realize that allow exploding is set to yes but exploding block to attributes does not work.
View 9 Replies
View Related
Dec 20, 2012
Is there any way at all to explode all block references in a drawing so that basically all block references no longer exist and they're just sat in their relevant layers.
In short... exploded :p
But I mean one way to get ALL of them.
View 4 Replies
View Related
Oct 2, 2012
I have a dynamic block with visibility states.When I use the method BlockReference.Explode(entities) I get in 'entities' all entities including all those who are part of the visibility states not selected. But I want only the entities in the selected visibility state.What surprises me more, is that entities from other states of visibility, although they were added to the current space, do not appear.
How to retrieve only entities associated with the selected visibility state?Or how can I identify entities that are not part of the state of visibility?
var entities = new DBObjectCollection();selectedBr.UpgradeOpen();selectedBr.Explode(entities);foreach (Entity entity in entities){ currentSpace. AppendEntity(entity); tr.AddNewlyCreatedDBObject(entity, true);}selectedBr.Erase();
View 1 Replies
View Related
Dec 4, 2013
In my Project I build a static Block by inserting dynamic blocks from a template dwg and then explode them.
Actually I create a new Data Base, insert the blocks from my template, set the according Dynamic Properties, Explode the Block in the temp DB and then wblockclone the resulting Objects in my destination BlockTableRecord.
This works fine, but:
in my source dyn. block there is an associative surface defined by a Polyline(Rectangle) , attached a stretch action to change the size. I can set the Width parameter, after the Explode the polyline itself is updated, but the planar surface is not... so if I explode this block I get a well stretched Polyline and the "base" surface.
Manipulating the dynamic Block works fine... If I have stretched 3D-Meshes, they are ok as well. It seems to be something with the planar surface object.
Dim objs As New DBObjectCollection idsToImport.Clear() If Helpers.Registry.GetValueFromRegistry("ExplodeSubs").ToString = "1" Then ' debug switch bref.Explode(objs) 'the dyn BlockRef in the external (temp) Database bref.Erase(True) For Each [code].......
View 2 Replies
View Related
Jul 23, 2012
I would like to explode a polygone I've created within a block.
But I get the "_amexplode This command is not allowed while the REFEDIT command is active."
Um so, I have to explode the block, explode the ployline/polygone and recreate the block.
Or, I could minus the polygone from the block set, save the block, explode the polygone, reopen the block and add the lines back in.
I don't see an explode option in the "pedit" options.
Am I missing something here, is there more than one explode command now? It worked in a previous version.
View 1 Replies
View Related
Nov 15, 2012
I have created an attribute say 1 and made a circle and moved the attribute text next to the circle and now making a block including both text and circle but when the block is created the text disappears I have made sure to check the annotation on in both attribute and block creation. This is just happening in Autocad Map 3D 2012. Dont know why the text disappears but when i explode the block it is back.
View 9 Replies
View Related
Jan 16, 2013
Typically when I click on the Set Origin button, all I then have to do is click on the page where I want the hatch origin to be, and everything works just fine.
I work on a shared computer. Start working this morning, and now when I click on the Set Origin button, it prompts me to inform it "SIngle or SUbobject?". And through a number of further selections, I can eventually get around to selecting my origin and having things shift around properly. But that really slows me up. Seems like one of the system variables got changed. I've doodled around a bit online, but haven't been able to find how to get things back to how they used to be.
And I tried opening a new page, restarting the program, etc., and the new way the button works has taken hold. I can't get it to reset. So on my computer (not working properly) when you click on the Set Origin button, the command line says "Command: _-hatchedit select hatch objects..select hatch objects: _S" then it says "ambiguous response, please clarify" "SIngle or SUbobject?"
On the computers that are working properly it only displays the "select hatch objects: _O" and doesn't show the _S part.
View 2 Replies
View Related
