How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 RepliesI have a NAS device on my home network that I am using to host my video content. The videos are played from a Windows PC, an iPhone and an XBox 360. I need the videos to be high quality and viewable from all three devices.
Currently, the MP4s created via VideoStudio are incompatible with the XBox. How can I make compatible MP4s?
Media Info shows the following information for the incompatible MP4 created in VideoStudio.
Select all General
Format : MPEG-4
Format profile : Base Media
Codec ID : isom
File size : 119 MiB
Duration : 3mn 32s
Overall bit rate mode : Variable
Overall bit rate : 4 682 Kbps
Encoded date : UTC 2012-04-18 15:14:18
Tagged date : UTC 2012-04-18 15:14:18
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L3.1
Format settings, CABAC : Yes
Format settings, ReFrames : 2 frames
Format settings, GOP : M=3, N=15
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 3mn 32s
Bit rate mode : Variable
Bit rate : 4 517 Kbps
Maximum bit rate : 5 000 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 30.000 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.163
Stream size : 114 MiB (96%)
Language : English
Encoded date : UTC 2012-04-18 15:14:18
Tagged date : UTC 2012-04-18 15:14:18
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 3mn 32s
Bit rate mode : Constant
Bit rate : 160 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 4.06 MiB (3%)
Language : English
Encoded date : UTC 2012-04-18 15:14:18
Tagged date : UTC 2012-04-18 15:14:18
I can't create MPEG-4 HD 1920x1080 25fps files from my edited video's. Even creating a template with 1920x1080 and 25fps seems impossible. I only get a 30fps (default?) setting.
View 2 Replies View Related I copied some videos to a DVD using a Panasonic DVD recorder and was trying to put them on my computer for storage and playback. It was three TV shows in VOB format with IFO files in the folder as well. Initially, the only way I could get anything to play was with the video TS file with windows media player, as my computer does not recognize VOB. This doesn't really work as they need to be stored separately given that they are different shows. Further complicating it is that instead of 3 VOB files, there are 5, so the episodes are spilt in the middle of some of them.
I came across this old thread viewtopic.php?f=1&t=19926&view=previous . I can't import from DVD because it reports it's not a valid format. I was able to rename them to mpg files, but have some issues. When played individually with windows media player, file 01 only plays 5 minutes of the video (About 20-25 minutes are just missing despite being over 1 gig) and the actual video is missing, just the audio plays (the video for that 5 minutes does play in vs x4, it is complete and works fine when playing from the video_ts file in windows media player). The others work fine. Each episode is about 42 minutes. Also noted that 01 is listed as being half of the resolution of the others.
When I try combining files and saving as various mpg options or flv, I either lose audio altogether at certain parts, or it is badly delayed/mismatched and the part that is not showing when I play file 01 alone is missing from the combined video as well. I also tried it in windows moviemaker, but it can't play the files at all.
I'm trying to burn +/- 1gb .mov/mp4 files to dvd to watch on a dvd player hooked up to a tv. I tried burning the mov/mp4 files directly to dvd but my dvd player isn't able to read them. VideoStudio 12 was included on my computer, will it convert mov/mp4 files to a format that can be burned to a dvd that I can watch on my tv?
I don't need to edit the files, just burn them to dvd in the highest quality possible to watch on my tv. If it will, are there any tutorials on how to do this?
Can I import XMF files into Video Pro X5 without first converting them? I cannot find the answer to this on the sales information. Also is there any way to import those XMF files into my current version (Video Pro X2).
View 9 Replies View RelatedI'm using X3. I encountered a problem today with captured DV files: I can't open them with VideoStudio. Some weeks ago it was possible to open those files. When I try to import them, VS says: "Unable to open file". I can open them with BSPlayer and Mediaplayer Classic (and sony vegas). With VLC Player there is a message that the file is "broken" but I can still see the video (but audio goes crappy). I've installed shark007's codec pack. I have also tried to reinstall videostudio, but it didn't work. I have a massive project file with many DV AVI files, and I can't see the files.
View 5 Replies View RelatedI would like to know about editing of .avi video files with Corel Video studio Pro. What i am trying to do is three things 1, remove existing text in the video while keeping the effects. 2, Add my own text to where the original text is now. 3, ad my own clips to the video. The .avi file that I am attempting to edit is actually a video template and is designed to be edited. I can't seem to remove the text in the video. There are two files : ".aep" and ".prpro" Would these file have any thing to do with the editing of the video files?
View 5 Replies View RelatedAs an organization, we have opted to go with STB as we have some complicated requirements that CTB doesn't accommodate. The wisdom of that decision is a moot point and I'm aware of the vast array of opinion.
We have a legacy of CTB drawings that occassionally need to be brought forward when projects get resurrected (state government highway designs are prone to getting shelved).
Up to AutoCAD 2009, I've had a VBA routine that performed a few operations on a list of files stored in a text file:
- Open the file
- Convert to STB using "CONVERTPSTYLES" with a specified STB file.
- Run a script to load a layer state file to change the plot styles from Style1, Style2 etc, to their correct named plot styles.
- Manage a recalcitrant layer that refused to play ball.
- Save and close the document
- Get the next file........
This was all fine until 2010 came along with the announcement that VBA was to be phased out. 2010 is OK with the VBA enablers, but now I've got some work to do.
Our organisation's development language is C# and I'm using Visual Studio 2008 Professional Edition to develop my C# .NET code.
Is there another mechanism than "SendStringToExecute" for sending a command such as convertpstyles to AutoCAD and getting .NET to wait for it to finish before proceeding.
I've got CommandEnded code that handles waiting for MTEXT and DTEXT commands to finish and I've tried constructing a CommandEnded for CONVERTPSTYLES, but it seems to me that commands that throw dialogue boxes such as CONVERTPSTYLESand SCRIPT aren't handled the same way.
I've tried setting FILEDIA to 0 prior to running the CONVERTPSTYLES command, however the message box that CONVERTPSTYLES presents before asking for the STB file appears to be getting in the way.
Just upgraded to Photoshop CS6 and am attempting (unsuccessfully) to edit some MGEG2 content. The video content has been extracted from Windows DVRMS files using DVRMStoMPEGGUI. I can work with H264 content in Photoshop without a problem.
All MGEP2 videos play fine with both Quicktime and Windows Media Player.Here is what happens when I try to edit the file in Photoshop
File is read by photoshop and all looks fine. First frame is shown as expected. If I try to play the video in photoshop, the elapsed time counters at the bottom give the impression that all is well, but the video does not play.Attempting to trim the video does update the overall timings of the video, but the first frame is still displayed.Rendering the video as H264 appears to work - the export dialog appears and a file does get created. The H264 file export is playable, but consists of the first frame displayed continually for the duration of the video..
editing MPEG-2 video content in Photoshop and another thread suggested checking that the video content is playable via Bridge. Like with Photoshop, Bridge displays the first frame of the MPEG2 in the thumbnail, but attempting to play it locks up Bridge completely. Doing a "Reset Settings" with Bridge made no difference.
Here is my setup
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
[code]...
so many tools and option here, and yet I can't seem to figure out how to convert old PCD files! Do I really have to buy something like Graphic covnerter to open these, and then move them into PS?
View 2 Replies View RelatedIf I have a bunch of jpg's and want to convert them all at one time to PDF's in CS6; how do I do that?
View 1 Replies View RelatedI have Photoshop 6.0 operating on Windows NT.
I need to be able to save files as PCX 8 bit 256 color for use on Chyron Codi version 1.5,
I'm running Photoshop (CS) V.8 in Win-XP.
I've got a CD-R with a bunch of image files which were originally scanned into a Mac version of Photoshop.
The file "properties" window says that the original files are "Photoshop V.7 or earlier."
How can I convert these files so I can open them in Photoshop CS Win?
I been having a problem with 3ds Max 2010 crashing in Mental Ray. Not enough memory problems. I know you can use Photoshop and convert your jpegs into Targa files at 32 bit and a image size that is easy for 3ds Max 2010 to understand without crashing mental ray. I forgot the Image size. I ran across it in another forum, on another website, but lost the link to the forum. It's been years since I remember the site.
what they do for texture images in Material Editor in 3ds Max 2010. I am messing with image size around 2000 x 2000 or 4000 x 4000, which are Poser 8 texture maps.
how to convert .max files to .mov files? I am new to 3ds Max and want to convert my animations to we can show them school wide on our system.
View 6 Replies View RelatedI am using AutoCAD lt 2004. I used to easily save files to pdfs using the plot command. My previous HDD was C:. Since replacing the drive and a few other things my HDD is now H:
When I try to save(plot) a file as a pdf now I get a message saying "windows is unable to read drive C;. Make sure there is a disk in the drive and that the disk is formatted and free of errors".
How do I convert a shape file (.shp) from GIS into a file format that I can use in Autocad (dwg, dxf)?? I use Autocad 2002.I am trying to convert a GIS county land use map that shows things like roadways, waterways, etc. into Autocad.
View 9 Replies View RelatedI'm looking for an application (retail) that does a good (accurate) job of converting PDF files to DWG or DXFs. I realize that it is not an exact science and each program has its strong and weak points.
View 9 Replies View RelatedI've been trying to export some CS4 Illustrator files to cad for laser cutting. Fab shops here use mostly Solidworks, but can use autocad. I'm selecting dfx/dwg in the export, and scaling to inches, even double checking the scaling is correct from a decimal measurment found on another forum thread, and it is-- but I've tried this about 8 times now with 2 different fab shops and they both say when they open the files the scaling is WAYYYY off, and there are breaks and "splines" all over that are disconnected.
View 11 Replies View RelatedI originally set up Lr to automatically build xmp files. Recently, I decided to go with dng files and have converted all my raw files to dng. Can I now delete all my xmp files and change my Lr setting so xmp files are no longer automatically produced?
View 19 Replies View RelatedI am seeing different behavior when converting CR2 files to DNG dependent on whether I am converting on internal SATA harddrive or a networked (D-Link DNS-323) harddrive connected via USB 2.0.
I have "Delete original after successful conversion" checked in bother cases. When converting on the internal SATA drive, LR4 deletes both the CR2 files and the xmp side cars But on the Networked drive, it leaves the xmp sidecars untouched.
I am using CS4, with Camera RAW 5.7 and Adobe DNG 5.7. These are the versions listed as compatible with CS4. I am using a new Canon Powershot S100. Can I use newer versions of the RAW/DNG with CS4?
View 7 Replies View RelatedI have an aerial ortho image with a world file and a .dwg that is in UTM NAD83 17N and some shapefiles that are LL83.
I know that these shapefiles correspond to the subject area, but right now these are not lining up at all because the shapefiles are in lat and long ie. -73.xx, 48.xxx and the UTM coords are i.e. 4870562.56, 555859.08.
How to do the transformation?I have tried to assign the NAD83 projection to the shapefiles, but they remain in the same lat long coordinate space.
Is there a way to convert a bunch of files at the same time from one image file format to another? I am converting JPEG to PDF. I had it all finished (I did it manually),
View 5 Replies View RelatedI have been building a library of beams for our robotics department for my work. They need iges files to put into weldpro. When I am converting to iges sometimes i get this error message, Unsupported photometric object light type. Not really sure how to fix it, like I said sometime this happens and sometimes it doesn't.Here is the command box text,
Command: _EXPORT
Select objects: Specify opposite corner: 1 found
Select objects:
Unsupported photometric object light type.
I created a few files using the student version of Inventor hoping to have a local water jet place do some cutting for me. Unfortunate, they can't read ipt files. They wanted it in dxf files.
How to convert ipt files into dxf files.
I have autocad 2011 and trying to convert my 3d files to stl files so I can print my objects in my 3d printer makerbot.
View 1 Replies View RelatedI have to sometimes make files for a router table, water jets, and plasma cutters. Some of the shapes are created from splines and or polylines. Our router program and some of the programs that our vendors use (water jet and plasma cutter) programs that have major trouble with the amount of control points (nodes) that are required to hold that shape as it should be. When I try to remove the nodes in autocad the shape changes.
One of the methods I have to use is to import the DXF file into Corel Draw X3 and remove all the extra nodes that the program will allow me to delete without changing the shape of the item. This works sometimes depending on the program that the vendor is using. I have to do different things for different vendors, and as I said this only works 50 percent of the time, and I will not know if it worked or not, until the vendor starts complaining about open files or not. On one occasion the final product came in from the vendor, and it was a mess, inside corners were blown out in large circles, and outside corners were rounded off into large circles.
The in house router table issue has been overcome, it is the water jet vendors and plasma cutter vendors that we are still having issues with.
I'm used to using AutoCad R14 and just recently had to purchase AutoCad 2010. The printing service that I have to use has to have the drawings in a PDF format and I found out how to make the conversion. However, the lineweights, the linetypes and the linetype scales are all out of wack. I have read about setting up a CBT file, but apparently I'm missing something someplace. I want to plot by color to achieve lineweight. Linetypes and linetype scales are set when the object is drawn, where the default is Continuous and 1 respectively.
View 3 Replies View RelatedI always have problems converting .dwg files to Mapinfo .tab's.
View 2 Replies View Related