VideoStudio :: How To Edit AVI Video Files
Dec 13, 2010
I would like to know about editing of .avi video files with Corel Video studio Pro. What i am trying to do is three things 1, remove existing text in the video while keeping the effects. 2, Add my own text to where the original text is now. 3, ad my own clips to the video. The .avi file that I am attempting to edit is actually a video template and is designed to be edited. I can't seem to remove the text in the video. There are two files : ".aep" and ".prpro" Would these file have any thing to do with the editing of the video files?
View 5 Replies
ADVERTISEMENT
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Aug 28, 2011
I want to edit a clip by cutting out the lips from one clip and overlaying them onto another still clip . i am using vs pro 4
View 2 Replies
View Related
Dec 26, 2012
Using Videostudio Pro X5. Captured video using GoPro at 240fps. Video imports fine. I want to edit the video in slow motion. I'm using the "speed/time lapse" option - I set the speed at "25%".
However the outcome is that the video is choppy as if it's throwing away frames. At this setting I should be getting decent smooth frame rates but this is not the case. I'm looking to end up with at least 25-30 fps.
View 7 Replies
View Related
Jun 16, 2012
I am new to VSP X5. I want to edit a music video that I recorded live. The live recording of the music was fine but I need to cut and paste new video clips in certain part of the songs in the video timeline. I split the audio from the video.
I am having a hard time trying to sync the audio because every time I cut the video clip, the video keeps snapping back, making audio out of sync. Also, when adding transitions, video clips automatic shrink. I tried enable ripple, video still snap back. Is there a setting in the preference?
View 3 Replies
View Related
Oct 16, 2011
I have VideoStudio XS4 Pro and it freezes when I try to edit a MPG4 video. The source video is from the Flip video player. I have been able to edit these without any problems before. This time when I put the video in the edit window I can start to play it, but then the UI stops working. It beeps when I try to press any button.
I'm using Windows 7. (see my machine profile) I have applied latest updates.
Project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
At this point the software is unusable.
View 5 Replies
View Related
Oct 16, 2011
Using VS X2, There is only black screen when editing sample file or any other video. All load correctly and can be viewed as individual clips but only black screen when playing "project" . Have re-installed program (repair) - no change.
View 6 Replies
View Related
Oct 18, 2012
Since there's no built-in VS5 provision for audio editing (specifically a sound equalizer), what's the easiest way to edit the audio portion of the video? Sony Movie Studio 12 Platinum has built-in Sound Force and the capability of using Audacity as a plug-in.
I have at least 100 3-4 minute clips that require audio EQ.
View 12 Replies
View Related
Jun 24, 2012
I’ve been using very happily been using x2 for a number of years to make a lot of movies from my standard definition camera, I’ve loved the programme, and it has generally been able to do everything I wanted, and made for an enjoyable editing process. However, the camera has finally given up and I’m now going down the HD route, and the old x2 version just keeps crashing with any new clips. So I have recently downloaded the trial version of x5 (5 days of trial left), with the intention of trying it out and then purchasing it.
Unfortunately however I have found it to be jerky and jumpy when editing clips together, particularly when using the overlay tracks, the more overlays the worse it gets. This happens when I want to watch the edit, and while the sound runs ok the video just freezes on a frame then jumps ahead a few seconds and freezes etc etc. Impossible to watch and edit to really.
I am using the smart proxy to get the files to a manageable size, and I can see the separate proxy files in explorer. Smart proxy enabled. I have all the acceleration on that can go on (the ”Enable Hardware Encoder Acceleration” is greyed out so I can’t tick it). When I share/render the movie it comes out just fine, so it’s only with the editing process that is jumpy. I have really enjoyed x2, and could get good results really quickly, and I enjoyed the editing interface and process with Corel VS, but am now thinking I might need to change to a different video editing programme.
Computer- HP Elitebook 8560w
Everything is just running off the laptop’s hard drive. I’ve installed The CVS x5 Service Pack 1
The project has only two clips – the first from a canon d550 as below
640x480 MOV
24 bits, 1848 frames
25.000 fps
73.92 secs
And the other from the net as below
MPEG-4 file
2890 KB
H 264 High Profile Video
989 frames
24 bits 640x480 4:3
30 fps
605 Kbps data rate
Project Properties
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 4:3
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 2 Replies
View Related
Dec 19, 2012
I have been using VS11But, I have just bought a new camera, a Panasonic HC V500. A small section of the info on the camera are the following lines:- 2D-to-3D Conversion.The camera processing engine automatically converts your 2D footage to 3D without the need for the optional 3D lens, to then be able to view on your 3D TV for an enhanced viewing experience.
Progressive Video Format for Smooth Action.The Full HD format employed in this model uses 1080/50p (AVCHD Progressive compliant) imaging. The Progressive format carries roughly double the image information of a 1080i interlace signal, minimising flickering and after-images.
As I edit and convert all my video footage into movies, will the latest VS programme retain the 3D conversion ability/facility, if so, what is the latest (or best) VS edition to purchase.
View 2 Replies
View Related
Aug 8, 2011
I am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
View 3 Replies
View Related
Jun 27, 2012
I am making a screen shot video for my website. I created 6 individual short videos that look great. When you play them individually, they look great. These are "how to use the website" short videos that do have typing on the screen. The typed words are perfectly clear as individual videos.
As soon as i merge the clips into 1 video, the typed words and the whole video gets fuzzy. I have re-shot new videos and I get the same result.
I have searched all over the internet for the last couple of weeks researching a solution. I've enlisted smart proxy and gone through just about every setting in "preferences" painstakingly slow and I still can't figure it out.
All of my information for my computer should be correct, but wasn't sure if i got the video card correct.
View 7 Replies
View Related
Aug 25, 2012
I would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.
View 1 Replies
View Related
Jan 14, 2011
Was able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies
View Related
Apr 22, 2013
Trying to edit video but Photoshop cs6 wont open the VOB files. I tried to change the extension to AVI and then drag it in. It works but it's distorted.
View 8 Replies
View Related
Jul 21, 2011
How do I go about converting MOV files into DV or mpeg files to edit? When I import the files are choppy I downloaded the quicktime, dvx and direct x files. No success.
View 9 Replies
View Related
Mar 27, 2013
I am trying to CREATE A VIDEO FILE in X6. The video files are in AVI format (taken from DSLR). When I do try to create a video file I get the error message:
I do not get this error in X4. Further, it seems I don't get this error message in all AVI files. Some are ok, others aren't. very strange indeed.
View 1 Replies
View Related
Mar 25, 2011
What format do you recomend exporting AVCHD files to that will result in the smallest file with the best video quality?
What I've found is that Zune MPEG-4 640x480 seems best, but this format is only in X2 not in later versions.
I can continue using this but if there's something "better"....I like to know about it.
View 5 Replies
View Related
Jan 2, 2011
Groupe a.png
(45.64 KiB) Downloaded 51 times
View 14 Replies
View Related
May 10, 2012
I am interested in saving my projects for both uploading to the web and for storing on my hard drive. I'm having some issues
I get by ok with the actual editing part of the VS 4 program. However, I am really struggling to figure out how to create the files in the most efficient format that would balance both quality/file size. I use two HD cams that record in the mp-4 format with h.264 compression 29.97fps. One is a Sanyo Xacti, the other A Kodak Playful. I like to record with the 720p/30 setting, and would prefer to retain the same frame resolution when I create the finished projects. Also these cams record at a rate of about 9000 kbps or so, but would like the finished project to be reduced to about half of that or maybe even less.
OK, so to this point I have experimented in saving my finished project to several different formats. And based on my first impressions, the AVI format looks best (when selecting ffd show and h264 compression). Only there's a problem...the audio is out of sync. About 1-2 seconds ahead of the video I have tried several times always with the same result. If I instead select xvid or h263 or h263+ as an alternative to h264, then everything seems fine. I have also tried creating a movie template with these parameters, as well as just going into the create custom file option and selecting AVI. Can't seem to solve the audio-video sync with h264 as the compression, no matter what I try.
Oh, and now that I've mentioned "Creating Movie Templates" I have another question dedicated just to that.
Why is it that when I save my project using my newly created template, the result is that I end up with several short saved files (portions of the complete project) instead of one single and complete file of my project? Have tried with both an AVI template in h264, as well as a WMV template. Doesn't happen when I don't use a template.
View 14 Replies
View Related
Feb 12, 2012
I'm using X3. I encountered a problem today with captured DV files: I can't open them with VideoStudio. Some weeks ago it was possible to open those files. When I try to import them, VS says: "Unable to open file". I can open them with BSPlayer and Mediaplayer Classic (and sony vegas). With VLC Player there is a message that the file is "broken" but I can still see the video (but audio goes crappy). I've installed shark007's codec pack. I have also tried to reinstall videostudio, but it didn't work. I have a massive project file with many DV AVI files, and I can't see the files.
View 5 Replies
View Related
Mar 24, 2013
I've been looking for a solution casually for about a year to this, maybe I'm just stupid! When I import all my videos from my camera and put them into appropriate folders they make thumbnails for the files. Unfortunetely when I close down my computer and come back, they have disppeared. This is a pain because, it makes a large amount of files easy to work with as you have some idea what's contained from a thumbnail! Now initially I just thought it was my computers age (not that old) but I have a Dell XPS i7 Laptop also and it's the same story!
I shoot high quality 1080i .mts files so I'm sure they are a resource suck! Is it because the computer doesn't have the power in the RAM to remember all these files? I would of thought, once a thumbnail is made it's just like a JPEG and not changing ever in real time? Is there something I've turned off on my computer, telling it not to remember thumbnails?
View 14 Replies
View Related
Sep 20, 2011
probably isn't an X4 issue exactly, but when i'm done editing a video file in X4, i'll close the file and insert the next video file to edit. when i go into windows explorer to delete the first file i just finished editing, it won't let me delete it because it says it's currently in use. How to delete it without having to close down X4 to do so?
View 11 Replies
View Related
Nov 26, 2012
I use Video Studio and have nearly 400 GB of video and photo data which I backup to DVD.track all my media files. For each file I would ideally like to track information such as: date/time taken, location, names of people, event, DVD volume lable. Thumbnails would be nice as well. I imagine some form of database which I can search for content and know which DVD/CD volume to load. Most product I have seen so far assume that the whole data library is on local disk, and doesn't handle the data being on removable media. If there is software does tracks media files but not on removeable media I will still be interested.
View 1 Replies
View Related
Apr 5, 2013
As I am having problems with a NewBlue video filter (Picture in Picture - see separate post with no replies so far) I would like to find out if video filters (esp NewBlue) are stored in a folder which is not a subfolder of Corel/VideoStudio (and which may not get removed during an uninstall). Where they are located (as I cannot locate them).
View 5 Replies
View Related
Jul 7, 2011
Need brief overview of the different formats in "Create Video File"?
MPEG-4, DV, DVD and the difference between this and Create Disk?
I have created my project on a laptop that does not have a DVD Burner. Should I create an MPEG file and copy it over to a desktop that has a DVD burner? Just looking for the best way burn a DVD.
View 3 Replies
View Related
Dec 14, 2010
I would like to convert my recorded mp4 videofiles with Corel Videostudio X3 to for example a DVD. The mp4 file is from a Sony DSC-H5 photocamera. It is HD quality not 1920 but i believe 1440 or something like that. What are the best settings to convert the mp4 to DVD without losing quality?
View 6 Replies
View Related
Apr 4, 2011
I'm a new user to VS and need combining 2 mpg files into 1 large video.
I have 2 mpg files that I would like to merge together to create 1 large continuous video. The 2 mpg files are in a folder on my D drive.
View 3 Replies
View Related
Apr 19, 2011
I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 Replies
View Related
Sep 30, 2012
I recorded a 37min. mp4 video, with my tablet Asus Infinity, on 720p resolution. The first 10 minutes are ok but the last 20min. are out of sync.
There is any possibility to repair the delay of the sound with Corel Video Studio X5?
View 3 Replies
View Related
Jan 8, 2013
Shooting with Canon 5DmkII DSLR, which provides 1920x1080 .MOV files at 29.97 fps. Data rate on the files is about 45Mbps, with a total bit rate marginally higher.I have been asked to output .MOV at 29.97, 1920x1080 progressive with PhotoJPEG compression at 90%, square pixels.
In Proj. Properties, I seem to need Microsoft AVI (MPEG doesn't allow 1920x1080 option). No compression, and have obviously kept 29.97 fps. Whether I want to perform non-square pixel rendering at this point, and haven't yet found any info on whether the camera shoots square or non-square pixels. Or I want frame-based or upper or lower fields first. I haven't found any explanation of what this means in the product documentation.
I've created an output template to give 1920x1080 at 29.97 fps, 24-bit colour. Again don't know whether to pick frame-based or upper or lower field first. Using PhotoJPEG compression (100% seems the only setting available, but that's OK).
In the final Create dialogue box Options, there is another chance to render non-square pixels (I'm assuming "no" here since I want square), as well as a checkbox for Smart Render, but again no explanation as to why I would need it.
So I've been practicing with 10sec clips to see what happens. With the above settings, the creation takes a couple of minutes and I have been able to generate a huge 1.6GB output file. Play is somewhat jerky since I don't think my computer can keep up. The input files are e.g. 233MB for 44sec, or about 5.3 MB/sec. Am I wrong to expect the output to be about the same size? Curiously, I have been able to generate 50MB files for two of the videos, and the rendering only took a couple of seconds. Unfortunately I have not been able to repeat this, but rather get these 1.6-1.7GB files as the routine. I have tried different input files with the same result.
View 7 Replies
View Related
