VideoStudio :: Creating Video Files?
Jan 2, 2011Groupe a.png
(45.64 KiB) Downloaded 51 times
ADVERTISEMENT
VideoStudio :: Creating Video Files
May 10, 2012I am interested in saving my projects for both uploading to the web and for storing on my hard drive. I'm having some issues
I get by ok with the actual editing part of the VS 4 program. However, I am really struggling to figure out how to create the files in the most efficient format that would balance both quality/file size. I use two HD cams that record in the mp-4 format with h.264 compression 29.97fps. One is a Sanyo Xacti, the other A Kodak Playful. I like to record with the 720p/30 setting, and would prefer to retain the same frame resolution when I create the finished projects. Also these cams record at a rate of about 9000 kbps or so, but would like the finished project to be reduced to about half of that or maybe even less.
OK, so to this point I have experimented in saving my finished project to several different formats. And based on my first impressions, the AVI format looks best (when selecting ffd show and h264 compression). Only there's a problem...the audio is out of sync. About 1-2 seconds ahead of the video I have tried several times always with the same result. If I instead select xvid or h263 or h263+ as an alternative to h264, then everything seems fine. I have also tried creating a movie template with these parameters, as well as just going into the create custom file option and selecting AVI. Can't seem to solve the audio-video sync with h264 as the compression, no matter what I try.
Oh, and now that I've mentioned "Creating Movie Templates" I have another question dedicated just to that.
Why is it that when I save my project using my newly created template, the result is that I end up with several short saved files (portions of the complete project) instead of one single and complete file of my project? Have tried with both an AVI template in h264, as well as a WMV template. Doesn't happen when I don't use a template.
VideoStudio :: Creating Video Files In AVCHD Format
Oct 18, 2013In order to create a video file in the AVCHD 1920X1080 format, I have the following options in the VSP X6:
AVCHD (1920X1080)
AVCHD (1920X1080, 24P)
AVCHD (1920X1080, 25P)
AVCHD (1920X1080, 50P)
What is the differences between those formats, so I don't know what to choose. My original clips are 25 frames/sec, does it means that I have to choose the 25P?
VideoStudio :: Split Single Video File Into Multiple Video Files?
Feb 13, 2011I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
VideoStudio :: Creating Multi-video DVD?
Feb 28, 2011I am having a problem trying to create a DVD with multiple "independent" videos. I want each one to be selectable on the main menu and to act independently of the others. When the selected video is finished, rather than going on to the next video, I wanted it to return to the introduction screen for the user to select another video or exit.
View 4 Replies View RelatedVideoStudio :: Pro X5 - Creating Video File And DVD?
Nov 18, 2013I'm using Corel Videostudio Pro X5 and have been filmimg in ACVHD.MTS format this year for the first time on motorsport events, I've edited all my 2013 footage and all is looking great.and now i want to save the footage into a file on my PC to upload into Sony DVD Architect to make a quality DVD production.
I have done this routine with my SD footage for several years and had no issues at all and created some great DVDs but now i'm using HD footage i'm getting lost with all the video formats that are available.
Basically which is the best format to save my video file onto my PC before i upload it into Sony DVD Architect? I tried the first option HDV which looked great and a reasonable file size but then it started to flicker and freeze during play back on my PC.
Also, even though i've been filming in HD i still only want to make a standard DVD because i share my work with friends who do not have Bluray players, will this be an issue since i have filmed in HD all year? All i after after really is the best quality footage i can produce for my DVD.
VideoStudio :: Creating AVCHD Video
Feb 2, 2011I am using VS2 and have been working on creating a "hybrid DVD" AVCHD video. I have a Canon HD video camera and an HP computer (w/regular DVD burner) with an i7 quad. Hybrid DVD is played on a Bluray player and HD TV. Everything is working well with editing the clips etc... Rendering has gone well with no real problems. I recorded video at the highest setting 24 Mbps. When I click on properties for a (m2ts) clip in the timeline it indicates 21,0000 to 22,000 Kbps that seems normal. I than go directly to the burn step (Create disc>AVCHD) and proceed to burn the disc at 4X. When I click on the middle icon (thumbwheel) these are the properties:
MPEG files
24 bits, 1920 x 1080, 29.97 fps
Upper Field First
(HDMV-NTSC), 16:9
H.264 Video
Video data rate: Variable (Max. 18000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
These settings seem normal to me. Also, the "do not convert compliant......" is checked.
This is what I am not understanding. When the 18 minute HD project is brought into the burn disc module, it shows only 1.45 GB of data and after the disc is burned, the video file properties found on the disc show a total bit rate of 11,768. As a test with the same project, I did a (create video file>same as first clip) and created a mpg file that is 2.75 GB in size with a total bit rate of 21,649 which seems normal. I understand VS has a max of 18K but shouldn't I be able to create a hybrid disc with a data rate close to 18K. The video at the lower bit rate plays and look ok using my BR player but I wanted to find out if I could create a higher quality video on disc.
I have read probably every post relating to what I think my problem is and after trying a couple of things, I cannot increase the total bit rate of the video on my hybrid disc.
VideoStudio :: Pro X3 Error When Creating Video File
Mar 6, 2012I've been editing with no problems for a while now but every time I try to share/create a video file it fails every time at 95%. I'm assuming it must be something specific for it to fail every time at the same point and i've tried it in multiple formats but always with the same result
I have included a screenshot.
VideoStudio :: Video Clips Pause When Creating DVD?
Jul 4, 2013I just tried creating my first video using VideoStudio X6 ultimate. I have multiple video clips, a jpg, an audio and a couple of music tracks. I've created it without problems and it plays great in the program during preview. My problem was when I tried to burn it to a DVD+RW disc. When I play the disc in my player, each time a video clip ends, there is a split second pause before the next clip starts. It also appears this way during the preview in the DVD creating utility. I submitted a ticket to Corel Support, and they told me to install the SP1. But I had trouble installing that service pack, but looking at my version, I see that I have 16.1.0.45. So maybe I already had installed it?
View 9 Replies View RelatedVideoStudio :: Creating The Best Quality Video File
Dec 14, 2010So, I have created many bluray video files which I store in my hard drive using the Corel pro "create a videofile feature" and they have worked pretty good, but I have found that burning the same bluray video onto a disc using Corel DVD factory has a superior picture quality, specially when you look at strong colors like red, they don't smear and have a rock solid look to it, I have also found that when the camera pans this problem shows its ugly face even more when creating a video file to the hard drive, but not in the burning disc process. I always choose two pass encode and the highest quality setting when burning a bluray disc.
Question, Is there a way to choose "two pass encode" in the Corel pro program or a way to change settings so that I get rid of the problem, or Can I use the Corel dvd factory in a way that I don't have to burn a disc, but just create a video file?
VideoStudio :: Creating Video File In BD Format
Nov 5, 2011I created a 4 minute video project in VS Pro X3. Source of video clips were from a Sony HDR-CX550V camcorder. I added some titles to a few video clips and 3 titles on a "Graphic - Color" background. When creating a video file (under SHARE) and choosing Blu-ray ----> NTSC MPEG2 (1920 x 1080), I found the following: Video clips are sharp, no problem, but the titles have black lines at irregular intervals, to the point that the letters cannot be read. What may be the cause and how can I eliminate this problem.
View 4 Replies View RelatedVideoStudio :: Sound Echo After Creating Video File
Oct 29, 2012Using X5 to create a video file from a project file in the timeline.
After the file completes rendering, the project preferences default is set to play the rendered file. But I find that when the playing commences after rendering, the sound has an echo effect that isn't part of the original files. Like the original sound is reflecting off walls, and you get the same sound just spaced apart by a small time period. I've tracked this to what appears to be X5 playing both the rendered file and the project file at the same time. If I turn the project preferences item "play after render" off, off course nothing happens after rendering completes. And separately playing the rendered file, the sound is normal.
Is there a way to stop this echo effect? Ideally, just play the rendered file only. But failing that, change the preferences default. However, there does not seem to be any way to change the project preferences default for this item.
VideoStudio :: X3 Crashes While Creating Video File With Error
Feb 9, 2012The error says as follows:
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis.
C:UsersChrisAppDataLocalTempvstudio_1.6.2.69_20120208_185709.DMP
VideoStudio :: V15 Trial / Creating Video File In HDV Format?
May 30, 2012I own VS 12, and when I work with HDV footage, I'm able to create an HDV video file either with MPEG optimizer or Same as first video clip. The project smart renders and I get HDV file. I've downloaded VS 15 trial as a test, as it has some additional features I'm interested in. However, with the VS 15 trial, following the same steps produces a file formatted as NTSC DVD 4:3 and no smart render. Am I missing something or is this a bug/limitation of the trial? Corel says the trial is fully functional. I'm running Windows 7 Pro 64 bit i5 4 GB ram. I even tried installing the VS 15 trial on my old XP laptop and had the same issue.
View 2 Replies View RelatedVideoStudio :: Change Default Options When Creating Video?
Mar 26, 2012how to change the default options when creating a video?
I keep forgetting to turn off "smart render" and "non-square pixel rendering" in the options dialog when I convert.
Also it would be nice to be able to turn on Dolby 5.1 by default as well.
VideoStudio :: Creating 1440 X 1080 MPEG2 Video File In X4
Apr 28, 2011I'm struggling to create a 1440 x 1080 mpeg 2 video file with a variable data rate.
The original HD footage is 1440 x 1080 but I can't find this option when I try to create a video file from my project. I am sure that I had many more options when rendering a video file in X2.
If I try using Create Video File/Same as Project Settings I can only get a 720 x 576 file.
If I try using Create Video File/Same as First Video Clip it looks like it's doing the job but I think I'm getting a file with a fixed data rate of 25,000 kbps which is too much for playback on my Western Digital TV gizmo (whereas a variable data rate of 25,000 kbps would play okay).
If I try Create Video File/Custom I can only get what I want by switching from mpeg2 to MPEG Transport-Stream Files (whatever they may be) but when I try playback on my Western Digital TV player I get the message "no audio channel" although the image is very good.
So how can I get a Video File the same as my original footage but with a variable data rate?
VideoStudio :: Creating Video File - Unable To Open MPEG Encoder
Aug 19, 2012I was trying to 'create a video file' when I received this message, 'Ulead VideoStudio [2000:1:1] Failed to open the MPEG encoder.
I've made countless movies and this is the first time I'm having this problem. Maybe I had it in 2008, but I've just turned 70 and remembering what I did then is a thing of the past!
VideoStudio :: Can't Create Video Files In X6
Mar 27, 2013I am trying to CREATE A VIDEO FILE in X6. The video files are in AVI format (taken from DSLR). When I do try to create a video file I get the error message:
I do not get this error in X4. Further, it seems I don't get this error message in all AVI files. Some are ok, others aren't. very strange indeed.
VideoStudio :: Internet HD Video Files
Mar 25, 2011What format do you recomend exporting AVCHD files to that will result in the smallest file with the best video quality?
What I've found is that Zune MPEG-4 640x480 seems best, but this format is only in X2 not in later versions.
I can continue using this but if there's something "better"....I like to know about it.
VideoStudio :: How To Edit AVI Video Files
Dec 13, 2010I would like to know about editing of .avi video files with Corel Video studio Pro. What i am trying to do is three things 1, remove existing text in the video while keeping the effects. 2, Add my own text to where the original text is now. 3, ad my own clips to the video. The .avi file that I am attempting to edit is actually a video template and is designed to be edited. I can't seem to remove the text in the video. There are two files : ".aep" and ".prpro" Would these file have any thing to do with the editing of the video files?
View 5 Replies View RelatedVideoStudio :: Thumbnails Disappearing With Video Files
Mar 24, 2013I've been looking for a solution casually for about a year to this, maybe I'm just stupid! When I import all my videos from my camera and put them into appropriate folders they make thumbnails for the files. Unfortunetely when I close down my computer and come back, they have disppeared. This is a pain because, it makes a large amount of files easy to work with as you have some idea what's contained from a thumbnail! Now initially I just thought it was my computers age (not that old) but I have a Dell XPS i7 Laptop also and it's the same story!
I shoot high quality 1080i .mts files so I'm sure they are a resource suck! Is it because the computer doesn't have the power in the RAM to remember all these files? I would of thought, once a thumbnail is made it's just like a JPEG and not changing ever in real time? Is there something I've turned off on my computer, telling it not to remember thumbnails?
VideoStudio :: Can't Delete Video Files After Editing
Sep 20, 2011probably isn't an X4 issue exactly, but when i'm done editing a video file in X4, i'll close the file and insert the next video file to edit. when i go into windows explorer to delete the first file i just finished editing, it won't let me delete it because it says it's currently in use. How to delete it without having to close down X4 to do so?
View 11 Replies View RelatedVideoStudio :: How To Manage Video Files On DVD Media
Nov 26, 2012I use Video Studio and have nearly 400 GB of video and photo data which I backup to DVD.track all my media files. For each file I would ideally like to track information such as: date/time taken, location, names of people, event, DVD volume lable. Thumbnails would be nice as well. I imagine some form of database which I can search for content and know which DVD/CD volume to load. Most product I have seen so far assume that the whole data library is on local disk, and doesn't handle the data being on removable media. If there is software does tracks media files but not on removeable media I will still be interested.
View 1 Replies View RelatedVideoStudio :: Where Are Video Filter Files Stored
Apr 5, 2013As I am having problems with a NewBlue video filter (Picture in Picture - see separate post with no replies so far) I would like to find out if video filters (esp NewBlue) are stored in a folder which is not a subfolder of Corel/VideoStudio (and which may not get removed during an uninstall). Where they are located (as I cannot locate them).
View 5 Replies View RelatedVideoStudio :: Different Formats In Create Video Files
Jul 7, 2011Need brief overview of the different formats in "Create Video File"?
MPEG-4, DV, DVD and the difference between this and Create Disk?
I have created my project on a laptop that does not have a DVD Burner. Should I create an MPEG file and copy it over to a desktop that has a DVD burner? Just looking for the best way burn a DVD.
VideoStudio :: Convert Recorded MP4 Video Files To DVD
Dec 14, 2010I would like to convert my recorded mp4 videofiles with Corel Videostudio X3 to for example a DVD. The mp4 file is from a Sony DSC-H5 photocamera. It is HD quality not 1920 but i believe 1440 or something like that. What are the best settings to convert the mp4 to DVD without losing quality?
View 6 Replies View RelatedVideoStudio :: X2 - Combine 2 MPG Files Into One Large Video
Apr 4, 2011I'm a new user to VS and need combining 2 mpg files into 1 large video.
I have 2 mpg files that I would like to merge together to create 1 large continuous video. The 2 mpg files are in a folder on my D drive.
VideoStudio :: Upload AVI Video Files To YouTube
Apr 19, 2011I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 Replies View RelatedVideoStudio :: Repair Out Of Sync Video Files?
Sep 30, 2012I recorded a 37min. mp4 video, with my tablet Asus Infinity, on 720p resolution. The first 10 minutes are ok but the last 20min. are out of sync.
There is any possibility to repair the delay of the sound with Corel Video Studio X5?
VideoStudio :: Created Video Files Are Huge
Jan 8, 2013Shooting with Canon 5DmkII DSLR, which provides 1920x1080 .MOV files at 29.97 fps. Data rate on the files is about 45Mbps, with a total bit rate marginally higher.I have been asked to output .MOV at 29.97, 1920x1080 progressive with PhotoJPEG compression at 90%, square pixels.
In Proj. Properties, I seem to need Microsoft AVI (MPEG doesn't allow 1920x1080 option). No compression, and have obviously kept 29.97 fps. Whether I want to perform non-square pixel rendering at this point, and haven't yet found any info on whether the camera shoots square or non-square pixels. Or I want frame-based or upper or lower fields first. I haven't found any explanation of what this means in the product documentation.
I've created an output template to give 1920x1080 at 29.97 fps, 24-bit colour. Again don't know whether to pick frame-based or upper or lower field first. Using PhotoJPEG compression (100% seems the only setting available, but that's OK).
In the final Create dialogue box Options, there is another chance to render non-square pixels (I'm assuming "no" here since I want square), as well as a checkbox for Smart Render, but again no explanation as to why I would need it.
So I've been practicing with 10sec clips to see what happens. With the above settings, the creation takes a couple of minutes and I have been able to generate a huge 1.6GB output file. Play is somewhat jerky since I don't think my computer can keep up. The input files are e.g. 233MB for 44sec, or about 5.3 MB/sec. Am I wrong to expect the output to be about the same size? Curiously, I have been able to generate 50MB files for two of the videos, and the rendering only took a couple of seconds. Unfortunately I have not been able to repeat this, but rather get these 1.6-1.7GB files as the routine. I have tried different input files with the same result.
VideoStudio :: Import XMF Files Into Video Pro X5 Without First Converting Them?
Jan 12, 2013Can I import XMF files into Video Pro X5 without first converting them? I cannot find the answer to this on the sales information. Also is there any way to import those XMF files into my current version (Video Pro X2).
View 9 Replies View Related
