I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 RepliesRight at the end of it being uploaded I get this message
<?xml version= ‘1.0’
Encoding=’UTF-8’?><errors><error><domain>yt:validation</domain><code>too_long</code><location
Type=’xpath’>media:group/media:keywords/text()</location></error>
</errors>
The video is only 3:45, so it doesn't exceed 10 minutes, I uploaded videos successfully when I had the trial version and whenever I try to upload it to youtube on the purchased version, it gives me the error above, and does not put the video on youtube, what is the problem?
I'm now running X5, I must say it is much faster. However, when I try to upload to youtube there is a 15 minute limit and the only option I have is to let it clip the video to 15 minutes or cancel (i.e. I can't render the video and then cancel the upload and do it manually because it CLIPPED the output to 15 minutes)
So, I try to create a template to use for Create Video File so it will match my other uploads. I can't set the frame width and height. Without a template the Create Video File, mp4 etc... the default is 1920x... In the Make Movie Template the highest I can set it is 720x... the custom size is greyed out. I don't understand (and maybe I don't know) why I can't set the video parameters to anything I want them to be. Why is 720x the highest available...
In X5... Is there a way to turn off the 15 minute limit? Is there a way to HACK and turn off the limit? Is there a way to create the videos and set the settings where I want them so they match my previous uploads?
Note, the "cancel the upload after file created" trick no longer works. If you think I can create a template, why I can't set the parameters.
My YouTube-account is upgradet for files ut to 20gb, and naturally longer than 15min. But my Corel VideoStudio PRO x4 does not want me to automaticly upload longer files than 15 minutes.
View 4 Replies View RelatedI am getting an application error when I try to upload to Youtube. It fails at the end of the upload process. I cant copy the error, see attachment for message.
Windows 7 x64
Asus Mb-P7P55D-E
4gb ram
1TB hd
Nvidia 9600
How to override the 15 min limit while export to youtube ? My account does not have 15 min limit so why the corel application forces me that limit
and
i cannot find other settings to make so good video "1280 * 720" 25 frames etc that are used when clicking youtube button.
Want semi-HD (not full-hd) but it would nice to be able to adjust the bit rate so that the size is under 2gb
i do not know much about color spaces. But I do know that different forms of media require using different colors (RGB, CMYK, all that stuff).
wrong color space or exporting formats.
What do I need to do to get the final video that I exported to look exactly the same (in terms of color) when it's uploaded on YouTube? Strictly just the color, because I understand quality goes down when uploaded to YouTube.
On the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies View Relatedok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies View RelatedI am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
I have used VSX5 to upload video files to the my facebook using share->facebook upload fuction.
After I upgraded to windows 8 and fresh reinstalled VSX5, I can't upload the file to facebook anymore using "share" and "web posting" fuction.
When I tried to upload video, it said "can't access the facebook" even my FB's ID and PS are correct.I already patched with SP1 pack.
How can a upload animation from Photoshop on youtube, as a youtube video ?
View 1 Replies View RelatedUpon uploading a video clip that already has video sound attached, why am I not able to hear that video sound when I try to edit my video?
View 4 Replies View RelatedMy camera films in AVCHD 1080, 25fps. I currently use VideoStudeo x6. i have been using it for a while and when i export for youtube videos, i find its only quality video when you change the youtube video to HD. Is there a way to set the video, so its still crisp and clear at 360p/480p, as i find its always distorted at these levels, although the footage is amazing in hd. What are the exact project properties i should set and the file export settings.
I am fully aware of the settings for youtube, however is it because iam filming in AVCHd i cant get that clean crisp look at lower levels on youtube? as the best setting for youtube are mpeg files. for reference please check this video i did: [URL]......
I shoot in 16:9 on the canon t3i, however when I upload my videos to YouTube there is a black bar on the left and right. The canon team said there should be a setting in premiere to make my videos full screen.
View 13 Replies View RelatedIs there any way to uploading Edge Animation animations on Vimeo or Youtube? (using v. 1.5)
View 1 Replies View RelatedWhen i used the older Lightroom 3 I was able to upload video files (.mov) to Flickr. Now, with LR5.2 Flickr shows those files as grayed out .mp4 files and do not upload.Same camera, Canon 7D.
View 1 Replies View Relatedwhen I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies View RelatedI have just loaded X4 (previously used VS 11.5 Plus); however, I can not seem to get the sound working properly inside the X4 program. My sound card is fine and when I play/select the individual files using windows explorer they all play fine. Is there a global mute setting that I have to turn off/on?
Also, I have a lot of audio, transitions(burger, etc) and animation files from VS 11.5+ that I would like to make available in X4. How you upload these file into X4? How to load the Bonus Audio content that came with X4 (animal, cartoon, etc)...
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
Is it possible to create stills from a youtube video and then import the still to Photoshop or any other Adobe program and create high res jpegs?
View 3 Replies View RelatedI record video tutorials about Photoshop (so, screen captures) and edit/combine the clips inside Photoshop CS6 in Win 7/64; Photoshop's new video talent is nice. I record 852x480px at 15 fps with FastStone Capture and save in WMV. I want to show the finished video tutorial on Youtube. There are several things baffling me when editing video in Photoshop CS6.
My original records (according to MediaInfo):
Software: FastStone Capture
Overall bit rate mode : Variable
[code]....
The result looks very nice when i play it locally in VLC. It looks like the original WMV. But: When i upload the Photoshop-version to YouTube, the video looks very badly "upsampled" and blurred. It looks much worse than the uploaded WMV original. If you like, you can compare the two videos from the same source online:
Uploaded WMV clip, looking good (set player to 480 p): URL....
Rendered in Photoshop CS6, looking bad (set player to 480 p): URL.....I do like the resolution of 852x480 and would like to keep it. If not possible, i have to record tutorials in 1280x720, even though icons and menus look too small. So far i have not tested it.
I searched my folder C:Program Files (x86)Common FilesAdobedynamiclinkmediaserver1.0. There is a lot in it which i don't understand, but some file names include "MPEG", "AVI", "Adobe QT Server" etc. I think there is no Quicktime installed on my machine; i try to avoid it as it does many different things to the system and is obnoxious.
My questions:
- When aiming for a YouTube cast, could i stay with 852x480 (at 15 fps), or doesn't it make sense? (I like that size.) If 852x480 is not ok, what is the lowest resolution for getting good looking presentations on Youtube?
- Why does the Adobe Media Encoder in my Photoshop CS6 only offer the formats H.264 and DPX? Can i get more? (Free, pay.)
- Do i need to install Quicktime? How could i do this with less intrusive QT behaviour?
- Should i record more fps in FastStone Capture? (I don't find more fps necessary when looking at the original and when looking at the uploaded *original*.)
Is there a way to split a really long video into 10 minute chunks during export? I know I can do this post export with other software, but I would've thought it could be doable straight in Premiere Pro (using CC).
View 5 Replies View RelatedI'm working on a project that requires some interaction controlling video. I've used the piece of code from this thread [URL] and it works like a charm. But I'm looking at option of using youTube video for the same interaction.
So on creationComplete, I've added,
var vid = sym.$("holder");
vid.html('<iframe width="640" height="360" id="video1" src="//www.youtube.com/embed/o2l_zZOpSxk" frameborder="0" allowfullscreen="0" controls="controls"></iframe>');
I been trying to Upload a video to YouTube and it keep messing with the sound every time or the video would be all choppy. Is it Corel VideoStudio Pro X5 or YouTube messing with the video. I am using the up-loader that is installed in the program . it used to work but now it mess up a lot of times.
View 1 Replies View RelatedI have a clip and want to load to youtube. VideoStudio starts and setp 1 is login to youtube. Tells me The login requested a user name or password not recognized. I have manually just logged on to Youtube with the same username and password. No problems.
View 2 Replies View RelatedI'm using Corel videostudio Ultimate X6 and regularly record live bands, upload them to youtube after I convert them to a MP4 format using videostudio. A few months ago one of the venues installed a set of quick flashing lights, now my videos look blocky and you can't even make out their faces.
View 8 Replies View RelatedI am using Video Studio X4. if I can capture You Tube videos for future viewing off line. I am a fairly new user and really need some detailed instructions if it can be done. There are some really informative tutorials regarding my husband's GPS unit and other gadgets but we don't always have access to an internet connection.
View 6 Replies View RelatedHow do I upload existing movies from DVD or youtube into the program for editing. When I follow the instructions it says "No valid content." Is it protected?
View 2 Replies View RelatedI can only upload 15 minute videos on Video studio x5. I cant find anywhere on the internet on how to change my login settings so I can upload past the 15 mark. I am verified from youtube to upload longer videos. Im getting sick of waisting my time saving it as a WMV and then going to youtube to upload it that way. My upload speed is slow enough already
So, How do you change youtube settings on Corel Videostudio Pro x5?
Picture wise,How can I not get this error when uploading to youtube?
I just finished building my first "serious" (i.e., with lots of clips, titles, sound track, etc.) video for YouTube. It runs about 7 minutes.
I used Video Studio 8 to develop the project. I tried rendering it in the .avi format with no compression, and ended up with something that runs slowly and has the audio badly out of synch. The file size, of course, is huge.
What format and settings are recommended for a project that is going to be put on YouTube? (I would like to use 640 x 480 if possible. That's the size used to build the project).