Using Inventor 11 I wish to create some individual parts using Structural Shapes from the Content Center as the basis for my sketch profile and extrude to length before doing other machining.
Is it possible to do this from the Part environment directly and not use the frame generator?
I created a structural shape profile for use in a project. It is square tube with radiused corners, very similar to "ANSI/AISC (Rolled Steel) Structural Tubing Square" in the content center, but mine is 1 inch square with 0.065 inch walls.
I've made a chassis out of my custom tubing. When I run a frame analysis on it, I get an error/warning stating that the torsional section modulus is zero, because I didn't fill in the value when I generated the frame. How do I calculate that value?
I've attached the tube that I used to make the structural shape.
I am new Inventor user (2014 version) trying to get up to speed on best practices and the most efficient work flows. I find myself designing individual parts that start off as base AISC shapes (angles, square tubes, rectangular tubes, etc.). These are parts that start off as base extrusions that then have multiple machining operations performed on them. In most cases, the parts are stand along parts that aren't involved in any type of frame.
In these cases, I generally sketch the profile from scratch using my AISC book and then extrude. I'm sure this is silly. Frame generator already has the profile data built in- so why am I sketching these profiles from scratch? But using frame generator in an assembly environment to make a single member part seems silly to me also. Why should there be an assembly file at all? I just want a single part that starts off as some length of some standard profile. Using frame generator in an assembly environment seems like overkill.
What is the best practice for starting off a part with some length of a standard ANSI, ISO, or other profile?
I'm using 2012 Professional and I would like to know if there is a way to insert a structural member into a part file instead of having to use Frame Generator to get structural shapes from the content center withough having to manuall draw the section view of the member..
View 5 Replies View RelatedWhen I insert a standard 6" square tube into an assembly there are all of the custom shapes and standard structural members to choose from. When I try to put the same tubing into a part file only the custom shapes are visible and no standard parts to choose from.
I can only guess that I have some obscure check box missing. There appears to be no good reason why I would be restricted in part files.
I want to create frame made out of structural steel. In order to do that Invwentor is giving me no option but to make Layout Sketch (any other way?), which then i should use for inserting members. Now, when i want to creat layout it does not give me an option of assigning it to a work planes i created. It always sketches it in default XY plane. I need to create 3D layout that will follow several work planes i created. I tried selecting any of the other work planes before clicking on layout button but no luck.
solidworks 2010
i.e., is it possible to create a custom iproperty which would enable the user to attach a particular attribute to every component within an assembly without manually going through each component.
For example, If I have a pipework sub-assembly within a manifold assembly. I want to create a custom iProperty for 'Component Type' which would be called 'Pipework' for every component called up within that subassembly.
Likewise for a frame could you have the above custom property attached to every component but called up as 'framework' instead etc.
is there a method to project the sketch onto the part so that i can then remove 2mm of that shape from the part....?
Inventor 2013 & Inventor 2014 (work)
I have a sheet metal part which is bend to a v-shape.
I want to have a cut out across the bend area. How to project that in to a flat pattern and cut out the relative opening size in the part.
Can you create a profile into a structural via the command line?
View 2 Replies View RelatedHow can I create the irregular shape?
View 3 Replies View RelatedI am trying to create two plane's one after the other like it is done in this video tutorial.
[URL]........
My problem begins with me only having 1 point on the part to pick for my 3 point plane command. In the video there is no bit where you are supposed to create a point but I'm thinking I wont be able to duplicate without doing something like that.
How to create a oval shape.The attached file shows the shape i need.How do i make the shape and then shell out 2mm.
View 2 Replies View RelatedHow do I get to the settings that control what does and does not show in any given discipline - we need to update the Structural Discipline to show the non-structural walls, and non-structural portions of other walls as halftone.
View 2 Replies View RelatedI'm trying to design a linear bearing that is composed of a billet of material to which six ball bearings are bolted. I was able to create a part representing the ball bearing from the manufacturer's dimensions. I then modeled a lock washer as a part, then an assembly consisting of a ball bearing and a lock washer. I then created an assembly from that assembly, with six of these ball bearing/lock washer assemblies in the desired orientations.
Now that I have the ball bearings oriented in space the way I need them, I need to model the billet to which they will all mount. I did things in this order because the ball bearings are metric, yet the rest of my design is in imperial units, and it just seemed easier to orient the bearings (which will interface with yet another assembly that I have yet to design) first.
I'd like to create my billet using the assembly as a reference. The assembly will tell me where I need holes in the billet to mount the bearings, where I need to cut out material for clearances, etc. I can't figure out how (or if) I can import my assembly into my part file, or what other tools are available to accomplish this task.
I'm attempting to model something similar to this. I've got the six bearings oriented in space, now I need to make the block to which they mount.
Looking for example macro that can create a new sketch, add a few lines and arcs, Then revolve the sketch around an axis to create a solid part. For example a shaft?
View 2 Replies View RelatedCan we have a better way to create “text” in the Inventor part drawings?
I almost create “text” in every part drawing in different view. I have to create a sketch first, than create a text and dimension the text so I can lock the text in position, otherwise when you move the view and the text will stay in different location.
I had been used “Solid works” for long times. When I need to create a text, just click that view and create a text and the text will stay with that view, whatever you move that view and the text move together.
it's possible to create a derived part using only some of the features of the base components i.e. I've got a funny shaped part with a bunch of holes in it, and I need another part with exactly the same shape but totally different holes (location and size)I know you can do this with the different solids in the part (only use some of the solids) but I haven't been able to figure it out with features, if it's possible at all.
I could probably create one base part (just the shape) and derive both parts from that, but then I've got a part lying around doing jack.using IV 11.
I am trying to use Create Simplified part and during the creation process..I downloaded a model of a FD breaker off the Eaton Website in .stp format. I am simply trying to get a .ipt file of the model for my layout model.So the steps I did:
1- Open .stp file
2- Save .stp file as an .iam inventor file (ignore the prompt box "this is not a part file", that is from my logic rule for a part file)
3- once saved in inventor format, I click the simplify tab, select create simplified part, select a name and directory and press save
4- the .iam saves into a single part, BUT it is saved as sean.ipt, not the part number I assigned earlier and it is saved to the directory C:Users, not the directory I assigned in the dialogue box earlier.
Why does it do this every time I "dummy" down an assembly to a single .ipt file?
I want to ask if in Autodesk Inventor 2013, can we create a part with a different configuration?
example:I made a cube the size of 10mm x 10mm x 10mm, after which it would be revised measures 15mm x 15mm x 15mm. The second revision to change the size of a 12mm x 12mm x 12mm.
Can all the revision is done in one file?And if I want to revise again be 10mm x 10mm x 10mm, can?
Have I been that provides revision always create a new file and the file number so much that hard to figure out which revision. I am still learning Autodesk Inventor 2013.
I'm starting with a tube and want to add a weld build up around the OD on both ends. I mainly want to do this so that when I create a sectioned view on a drawing, you can see the difference in hatching between the original tube and the weld build up. I've had to create sketches on the drawing up to this point.
The photo I've attached shows the tube and shape of the weld build up. the green line is where I would like the tube OD to be, and the weld build up would be everything above that.
I'm using Inventor Pro 2013.
I need to create a hole table for a part. I would like the origin to be at the center of the part. Problem is there is not a round hole at that location. Attached is a similar part. The one that I am doing is much larger and has many more holes... this is just an example.
How can I pick this as the origin of my hole table?
I would like to link a cell value in excel with the partnumber from a assembly in Inventor. How can I made this link?
View 1 Replies View RelatedI would like to create string that would be tied to a rod and wrapped around an axle. Then when the rod is moved the string rotates the axle, but the string continues to grow as it is being pulled.
View 2 Replies View RelatedI like to change the dimension of the length from 388mm to 400mm to represent another similar part with another part number. Yet I still need the old part.
What is the easiest way to do so? When I use 'save as" and then change the dimension, I need to recreate the dimensions in the dwg files. Is there a way to avoid creating the dimensions?
I want them to appear as a one of the choices in the box after you click NEW (part, drawing, assembly) asside of standard options?
View 1 Replies View RelatedI'm trying to create a simplied part of a conveyor. It's not too big yet, just over 7000 occurrences - see attached. Yesterday after about 5 hours I crashed Inventor (2014) and tried again. Eventually I let my PC run through the night and this morning it had completed the task. To save took almost 2 hours, producing an *.IPT of just over 830MB. When I restarted my machine (to free the RAM again) I could not open, getting a serious error.
The old shrinkwraps seemed to work way better. I need to create a "dummy" model which breaks all links to the originals assemblies so no one can tamper with it.
My specs:Inventor Professional 2014, 64 bit edition, I've got an HP Z400 desktop which is a 3.2GHz Processor with 4 cores, 12 GB RAM. NVIDIA Quadro 4000 graphics card.
I am trying to create a part that has a spherical feature. The spherical feature is "sliced" on the front and back to create a flat surface (see Compound Rest Handle Isometric image). Should I use workplanes to slice the sphere? What is an efficient process the slice the sphere. See Compound Rest Handle Front and Compound Rest Handle Back images and compare to the final result in the Compound Rest Handle Isometric image).
View 9 Replies View Relatedcode example of how in .iam create a virtual part and save it separately in specific folder?
View 3 Replies View RelatedIm trying to create a shape like the attached image using sheet metal loft from one sketch to the second sketch. No problem doing that but i want to extend the neck on the small end 1 inch like the attached image.
Currently the product is produced using 4 panels brazed together. I want to create the product with 2 bent panels 90 degrees that are split apart from the loft.
Not sure if this even possible in the real world sheet metal house to develop the flat pattern.
I'm trying to create a hole in a sheet-metal part so that a pipe can be welded in it, see attached picture. What's the best method to do this? Because the flat-pattern of this hole isn't an ellipse-shape (more like an egg), it seems it's very difficult to do.
Product Design Suite 2014
Inventor 2012 SP2, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)