AutoCAD Architecture :: Create Profile Into Structural Via Command Line?
Dec 14, 2011Can you create a profile into a structural via the command line?
View 2 Replies
ADVERTISEMENT
AutoCAD Architecture :: 2012 Offset Command Offsets Structural Member Other Direction
Feb 1, 2012Im using MEP and in MEP2010 the Offset command worked fine on my structural members, offsetting to the direction I picked.
In MEP2012 the offset command now offsets the same structural member to the opposite side of the point I pick.
The structural member is rolled 180 and the way I can correct this offset issue is to roll the SM back to 0, then the offset command offsets to the correct side.
Is there a new setting or something in 2012 that will get the offset command behaving the way it did in 2010 where it does not care about the objects properties and just offsets it correctly?
AutoCAD Visual LISP / AutoLISP :: Accessing Structural Member Via Command Line And Material Addition
Dec 19, 2011I'm writing some code to create various structural members, but I also need to add the texture map. Since it is doing the creation via VL, I need a way to add a material without that darn dialog box. Can material be add to a member programaticlly?
View 1 Replies View RelatedAutoCAD Architecture :: Raised Decking Profile / Create A Profile / Wall Style
Oct 9, 2011I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies View RelatedAutoCAD Civil 3D :: Create Dynamic EOP Profile Based On Cross Slope From Center Line Profile
Jun 28, 2012The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
AutoCAD 2013 :: Set Profile By Command Line?
Dec 5, 2012Is there a way to set a profile by the command line instead of through OPTIONS? I'm contract and do not have admin rights on the PC so I can't change the startup target to my profile.
I can write a script to make the changes I need at every startup but can't find the profile setting command/variable.
AutoCAD Architecture :: Add Layer Key Via Command Line
Jan 31, 2012I know how to add to the layer keys, and it seems to me that you can add a layerkey via the command line. Is this accurate or just wishfull thinking?
View 1 Replies View RelatedAutoCAD Architecture :: Command Line - Space Bar
Sep 23, 2013we have a strange problem showing up here on Autocad Architecture 2014 on Windows 8: We use the "space-bar" to confirm a command or shortcut. After start of AutoCAD everything seems fine but suddenly a hit of the space bar is interpreted as two hits:
Line <space>
Specify first point:
Specify first point:
Specify next point or [Undo]: [cursor ready for next point]
No chance to point the "first point". It is either 0,0,0 or the last coordinate.
Using the <Enter> button (or selecting an icon) is working as expected / normal but very unhandy because on the right side of the keyboard.We tried different keyboards but this is not a hardware problem!
AutoCAD Architecture :: Keep Getting Warning Message In Command Line?
Oct 8, 2010I was using 2009 Architecture. I kept getting a message in the command line: "WARNING: Xdata tag 100 is missing" like hundred to 1000 times and while its scrolling through this same message in the command line I can not do anything but wait for it to finish. Not sure if a recent windows update has anything to do with it. I am using XP Pro. I have a Dell with 3GB of ram and a Radeon X300/X550/X1050 video card and am running dual monitors. I have an upgrade to Archtiecture 2010 so rather than reinstall 2009 I installed 2010. Unfortunately, same problem. In 2009 I seem to remember that it was more random. In 2010, it pops up when I do an xref reload.
View 9 Replies View RelatedAutoCAD Architecture :: View Command Line Options?
Feb 4, 2011What is the command line procedure to restore or reset the preset Isometric views. e.g. SW Isometric, SE Isometric etc.
Just want to create a lisp to set these views but I need to know the command line input.
AutoCAD Architecture :: Create Profile From Opening
Sep 9, 2011I'am trying to create profile from opening.I have found interesting method : Profile.CreateFromProfile.But every time i call this method "eInvalidInput" exception is thrown.
I am trying to call method like that:
Profile.CreateFromEntity(entity, Matrix3d.Identity);
AutoCAD Architecture :: Set Distance / MEASUREGEOM Command To Label Line
Feb 22, 2013m in the middle of a little project and want to know if its possible to save the info that the _MEASUREGEOM command displays when applied to measure distance or angle to the project.
I used to use a lisp script to do this but that was on my PC. Im not running autocad on my mac and it wont alow me to run the script. it loads it but then gives the error
error: vl-load-com not supported on "Mac OS X Version 10.8 (x86_64)"
when i try and apply the command. Does MEASUREGEOM have a built in feature to save these details to the project i.e. next to the line or shape measured?
AutoCAD Architecture :: Roof Line Command In Project Environment
Feb 15, 2011I am using 2011 and have created a project for a 2 story structure. I have constructs for each floor, each floor slab and roof slab.
In which construct do I apply the roofline command? I am unsuccessful so far. Does the roof slab need to be in the same construct as the walls?
AutoCAD Architecture :: Autocomplete On Command Line / List Box Cut Off By Screen
Oct 25, 2011When entering a command with autocomplete on and the List option on, the list dropdown only displays two or three of the possible choices, because the list box opens below the command line, which is at the bottom of the screen. Unless I minimize acad and adjust the window to only fill part of the screen, I can't see the list. This is a shame, because it is a cool feature. Having a dialog box display off the screen? how to get this to either display on the screen? Here is a screen shot of how it looks at window max and window minimumized.
View 9 Replies View RelatedAutoCAD Architecture :: Text Would Show In The Command Line As It Was Typed?
Feb 26, 2013Is there a setting controlling typed text visibility in the command line when using a leader? In 2004, text would show in the command line as it was typed. Now, to see what I am typing, I have to enter the leader dialogue box.
View 6 Replies View RelatedAutoCAD Architecture :: Command Line Reads No Space Generated
May 16, 2008I have a room with a cathedral-style ceiling. I'd like to create a freeform space. What's the secret? I've changed the properties from extruded to free form, and then selected the boundaries (floor slab, ceiling slabs & walls), then hit "G" to generate the space. The command line reads no space generated.
View 2 Replies View RelatedAutoCAD Architecture :: Cannot Change Dynamic Block Properties At Command Line
Jul 24, 2012I have created a library of dynamic blocks in AutoCad10. When I craeted them I could click on the Grip for a Linear Parameter that was associated with a Stretch Action and the current value would be displayed (Example: The width of a block). I could type in a new value and the block would stretch to that value. Something changed this week when I attempted to use my blocks. When I click on the Grip no dimension is displayed. The command line shows "Specify point location or [Base point/Undo/Exit]". I can drag the grip to change my block but I cannot simply type in a new dimension as before.
View 2 Replies View RelatedAutoCAD Architecture :: How To Create Door Style Using Custom Made Profile For Jamb
Sep 17, 2012In my previous post of the same subject, I managed to create a door style using a custom made profile for the jamb .However I have been having a lot of problems trying to make the door leaf sit properly between the jambs. Attached is what I'm trying to achieve - is that possible in ACA? (BTW this was done in Revit)..
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Create Feature Line From Profile
Jul 15, 2013is there a way to draw a line in the profile view and create that line into a feature line? and if there is can i project that line into the plan? i know that you can make a feature line in the plan and project that feature line into a profile view, just wondering if you could basicly do the reverse. i don't want to make a coridor.
View 4 Replies View RelatedAutoCAD Architecture :: Trimming A Structural Member
Jul 28, 2011I created a structural member of Pro-Panel II and placed it like a column. This works great, except when I need to trim the excess off at the end of a wall. I tried using a body modifies and it works in model view, but it doesn't in plan view.
View 1 Replies View RelatedAutoCAD Architecture :: Structural Member - Elevation Tag
Mar 11, 2013I've attached a structural member. Is it possible to tag each end individually and have ACA report if it's the high end or low end of the structural member?
View 1 Replies View RelatedAutoCAD Civil 3D :: Create Profile Layout From Feature Line
Oct 4, 2012I want to create a profile layout by feature line. Is it possible?I have a pipe about 3 miles long, an alignment along the pipe, and a provie view showing the exisitng surface and pipe network. The pipe network was created from a feature line. I projected the feature line to the profile.
This is why I want to do this: I need to label the horizontal and vertical angle points of the pipe in plan view. I crated a style that shows the station and elevation. I want the elevation to reference the profile. But it only gives me the elevation of the surface and I need the top of pipe elevation.
I tried crate profile by layout and traced over the top of the pipe in profile but its 3 miles and it will take a long time. How to get what I want done faster?
AutoCAD Civil 3D :: Create Feature Line From Alignment / Profile?
Oct 25, 2013C3D 2013, Win 7, 64 bit
When I try to create a feature line using an alignment/ profile, sometimes it gives me a feature line for the entire alignment, even though my profile is only a small segment. I made sure I selected the correct profile, and I even deleted all other surface profiles just in case. But it still gives me a wonky feature line for the entire alignment.
However, in the same file, other profiles have worked perfectly.
AutoCad 2D :: Create Line Types Using MKLTYPE Command
Sep 1, 2013im trying to create line types using the MKLTYPE command , im creating the text and the lines and the text in paperspace and im using annotative text (2mm height fixed) . ie: dashed line 100mm "WA" and another 100mm of dashed line (--------WA---------) , I Need this line in any scale to act the same.
Ive tried many times but the text size is bigger then 2mm and the lines override the text.
AutoCAD Architecture :: Convert Polyline To Structural Element
Jun 10, 2012I need to convert a polyline to a structural element and put it on a tool palatte. I'm pretty sure I got it into the Design Manager, now I need to make it a structural element. I used to know how to do it in Acad 9, but now in Acad 12 I forgot,
View 1 Replies View RelatedAutoCAD Architecture :: Modifying Custom Structural Member
Apr 5, 2012I had created a structural member using the structural member wizard. I used many instances of the member in my drawing. However, the thickness of the member needs to be modified. Is there a method to modify the existing custom structural member without creating a new custom structural member?
View 2 Replies View RelatedAutoCAD Architecture :: Tag To Automatically Label Structural Beams?
Oct 19, 2009Creating a tag to automatically label structural beams? I am trying to label a beam with its style name and bottom of beam elevation but I am not having any luck.
View 3 Replies View RelatedAutoCAD Architecture :: Structural Members From Automatically Mitering
Mar 3, 2011How do you stop structural memebers from automatically mitering?
View 3 Replies View RelatedAutoCAD Architecture :: Structural Beam With 3 Nodes - Start / Mid And End
Mar 7, 2012I have a 3 node Structural Member created that works... Now the next questions... Can you anchor columns at 3 column grid intersections... then draw this 3 node Structural Beam such that it will anchor also... so that... if you adjust the column grid... the columns and the 3 node structural member will adjust accordingly?
View 1 Replies View RelatedAutoCAD Architecture :: Structural Beam With Start / Mid And End Nodes
Mar 7, 2012How can I do a Structural Member Style with 3 nodes along it's length... a start, mid, and end nodes?
View 2 Replies View RelatedAutoCAD Architecture :: Make Custom Palette For Structural Members?
Oct 21, 2011I am trying to make a custom palette for structural members. "Then, temporarily deactivate the link and change the dimension properties of the tool to 4 x 4 x 4 meters. Next, copy the tool back to the Content Browser. The Content Browser catalog is updated with the new tool properties. Finally, reactivate the link from the Content Browser tool to the AutoCAD Architecture palette."
View 5 Replies View Related