I need to convert a polyline to a structural element and put it on a tool palatte. I'm pretty sure I got it into the Design Manager, now I need to make it a structural element. I used to know how to do it in Acad 9, but now in Acad 12 I forgot,
View 1 Replies
I want to convert a 3D polyline to 2D polyline.
View 5 Replies View RelatedI created a structural member of Pro-Panel II and placed it like a column. This works great, except when I need to trim the excess off at the end of a wall. I tried using a body modifies and it works in model view, but it doesn't in plan view.
View 1 Replies View RelatedI've attached a structural member. Is it possible to tag each end individually and have ACA report if it's the high end or low end of the structural member?
View 1 Replies View RelatedI had created a structural member using the structural member wizard. I used many instances of the member in my drawing. However, the thickness of the member needs to be modified. Is there a method to modify the existing custom structural member without creating a new custom structural member?
View 2 Replies View RelatedCreating a tag to automatically label structural beams? I am trying to label a beam with its style name and bottom of beam elevation but I am not having any luck.
View 3 Replies View RelatedHow do you stop structural memebers from automatically mitering?
View 3 Replies View RelatedI have a 3 node Structural Member created that works... Now the next questions... Can you anchor columns at 3 column grid intersections... then draw this 3 node Structural Beam such that it will anchor also... so that... if you adjust the column grid... the columns and the 3 node structural member will adjust accordingly?
View 1 Replies View RelatedHow can I do a Structural Member Style with 3 nodes along it's length... a start, mid, and end nodes?
View 2 Replies View RelatedI am trying to make a custom palette for structural members. "Then, temporarily deactivate the link and change the dimension properties of the tool to 4 x 4 x 4 meters. Next, copy the tool back to the Content Browser. The Content Browser catalog is updated with the new tool properties. Finally, reactivate the link from the Content Browser tool to the AutoCAD Architecture palette."
View 5 Replies View RelatedI ran into a problem with the structural member wizard today. I was making up a bunch of glulams and everything was doing just fine, then all of a sudden the wizard stopped accepting new values for the member depth. No matter what you try to enter, it is rejected and a value of 1'-0" is placed in the field. It will accept new values for both width and lamination depth however. I tried to make a member of another material (steel) just in case it was just the glulams. No luck, they behave the same way, you can't set the beam depth. I also tried restarting ACA, working in a completely new (and clean) file, as well as restarting my computer, it didn't work.
I really don't want to have to go through the repair/reinstall circus if I don't have to.
How do you make both the Plan and Plan Low Detail both show in bold as being current in the display properties of a structural member?
View 3 Replies View RelatedCan you create a profile into a structural via the command line?
View 2 Replies View RelatedWe've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
I have 2D polylines and want to convert to polylines, but to no avail. Tried to 'spline2pline' this line, but ACAD refuse to select it.
View 9 Replies View RelatedIm using MEP and in MEP2010 the Offset command worked fine on my structural members, offsetting to the direction I picked.
In MEP2012 the offset command now offsets the same structural member to the opposite side of the point I pick.
The structural member is rolled 180 and the way I can correct this offset issue is to roll the SM back to 0, then the offset command offsets to the correct side.
Is there a new setting or something in 2012 that will get the offset command behaving the way it did in 2010 where it does not care about the objects properties and just offsets it correctly?
I cannot draw any elements from design pallet. Happens suddenly. Probably I accidentally switch something. In command line show command like:WallAdd and right away show another command line. Cannot add any doors or windows - same problem.
View 9 Replies View RelatedI'm trying to figure out a way to convert a 'Polyface Mesh' into a mass element or some other solid. The Polyface Mesh was created by importing a .3ds model using the '3dsin' command. The .3ds file was created from exporting the model out of Max.
View 5 Replies View RelatedThere used to be a product called Cadmin, that was a very useful tool for changing common elements in a group of door window assembly styles at the same time.
I have a source file with 870 door window assembly styles that I want to modify a division in. The division has the same unique name in all of the assemblies, and I want it to end up the same in all styles. Is there a way to do this that I am not aware of or do I have to select 870 styles individually?
I am new to ACA and was trying to use the massing element from either the build ribbon on home page or design tool palette. I select the icon and then right click the properties box and all the dimension boxes are gray not letting me input data. I cannot find out how to change them to be editable.
View 3 Replies View RelatedI have a list of (0 .4 .8 0 10). I want to convert every element of the list to string.
View 4 Replies View RelatedI've created a fairly simple mesh in 3DS Max to use as topography in ACA. I'd like to be able to turn the geometry into a mass element or even a 3D Solid so that I can use it ACA, but this doesn't seem possible. I feel like Ive tried every conversion method I know how to do but ACA doesn't seem to have this ability, or least not a very strong ability.
View 3 Replies View RelatedHow to convert a 3D Polyline contour to Polyline contour.
View 4 Replies View RelatedHow do I get to the settings that control what does and does not show in any given discipline - we need to update the Structural Discipline to show the non-structural walls, and non-structural portions of other walls as halftone.
View 2 Replies View RelatedI want to convert a line (Autodesk.AutoCAD.DatabaseServices.Line) to a polyline (Autodesk.AutoCAD.DatabaseServices.Polyline).
Currently I get all the properties from the line, create a new polyline with it and delete the line. I fear data may get lost this way. What is the best way to convert a line to a polyline?
// Line properties:// Color.// Layer.// Linetype.// Linetype scale.// Plot style.// Lineweight.// Hyperlink.// Thickness.// Material.// Start X.// Start Y.// Start Z.// End X.// End Y.// End Z.// Start point.// End point.
How to convert 2D polyline into 3D polyline using AUTOCAD 2012?
View 6 Replies View RelatedI've MAP 3D 2013 64 bit (French version) with SP1.
When I launch command to "Convert polyline to polygon" (_MapPolylineToPolygon), I've message on command line "Select objetcs", I can convert to polygon =>OK
If I launched this command a second time, I've no possibility to select object, I come back to command line.I quit MAP, then launch MAP, and I can use this command only 1 time.
This problem appears after SP1 was applied.
I have one drawing but this is Spline but i want to convert it into polyline. without tracing it. i attach my dwg file with this massage.
View 9 Replies View RelatedHow can I convert Spline to Polyline.
View 9 Replies View Relatedhow a drawing was exported from another program. My problem is: the PEDIT command won't give me the option to convert a line "I" add to a pline.
PEDITACCEPT: 0 or 1, problem remains
It is a drawing from an house designer, I am adding structural members and notes over the drawing. I could xref, but I need to move/erase some of their notes as well. It becomes cumbersome to switch to the source dwg, edit & save, move to current dwg and refresh, to have the note where needed.
This is a pretty strange to me drawing file. It seems that a bunch of system variables are altered and hopefully it doesn't migrate over to files originating from my machine.
How to convert polyline into alignment?
View 1 Replies View Related
