Creating a tag to automatically label structural beams? I am trying to label a beam with its style name and bottom of beam elevation but I am not having any luck.
View 3 RepliesHow do you stop structural memebers from automatically mitering?
View 3 Replies View RelatedI have been trying to add beams to a layout of columns and some of them (not all) are behaving oddly. Instead of the beam trimming square at the side of the columns, the column and beam are joining with a mitered connection. The same is happening with some of the intersecting beams...a 45 degree miter on each beam.
There must be some setting that I have inadvertantly changed but I cannot find what it is. Changing trimming parameters in the Properties panel that seem like they should be involved, has no effect. And neither does cycling, via the Control key, the connection parameter when the beams are placed.
We are using ACA 2011. When I look to place a default Steel Column from the Design tab of the Design tool palette, I see no optoins re: the make-up of the column, only the length - the column only shows as a generic extruded box. Are there I-Beam, C-Beam profiles loaded anywhere in the content that I can access.
View 3 Replies View RelatedI have a shed roof with a series of beams. The roof has a hatch. In the RCP, how can I show the beams "in front" of the hatch? I've tried changing the view to Hidden, but that gives me the top of the roof, not the underside... Also, many of the floor items (such as kitchen cabinets) are showing.
View 4 Replies View RelatedI created a structural member of Pro-Panel II and placed it like a column. This works great, except when I need to trim the excess off at the end of a wall. I tried using a body modifies and it works in model view, but it doesn't in plan view.
View 1 Replies View RelatedI've attached a structural member. Is it possible to tag each end individually and have ACA report if it's the high end or low end of the structural member?
View 1 Replies View RelatedI need to convert a polyline to a structural element and put it on a tool palatte. I'm pretty sure I got it into the Design Manager, now I need to make it a structural element. I used to know how to do it in Acad 9, but now in Acad 12 I forgot,
View 1 Replies View RelatedI had created a structural member using the structural member wizard. I used many instances of the member in my drawing. However, the thickness of the member needs to be modified. Is there a method to modify the existing custom structural member without creating a new custom structural member?
View 2 Replies View RelatedI have a 3 node Structural Member created that works... Now the next questions... Can you anchor columns at 3 column grid intersections... then draw this 3 node Structural Beam such that it will anchor also... so that... if you adjust the column grid... the columns and the 3 node structural member will adjust accordingly?
View 1 Replies View RelatedHow can I do a Structural Member Style with 3 nodes along it's length... a start, mid, and end nodes?
View 2 Replies View RelatedI am trying to make a custom palette for structural members. "Then, temporarily deactivate the link and change the dimension properties of the tool to 4 x 4 x 4 meters. Next, copy the tool back to the Content Browser. The Content Browser catalog is updated with the new tool properties. Finally, reactivate the link from the Content Browser tool to the AutoCAD Architecture palette."
View 5 Replies View RelatedI ran into a problem with the structural member wizard today. I was making up a bunch of glulams and everything was doing just fine, then all of a sudden the wizard stopped accepting new values for the member depth. No matter what you try to enter, it is rejected and a value of 1'-0" is placed in the field. It will accept new values for both width and lamination depth however. I tried to make a member of another material (steel) just in case it was just the glulams. No luck, they behave the same way, you can't set the beam depth. I also tried restarting ACA, working in a completely new (and clean) file, as well as restarting my computer, it didn't work.
I really don't want to have to go through the repair/reinstall circus if I don't have to.
How do you make both the Plan and Plan Low Detail both show in bold as being current in the display properties of a structural member?
View 3 Replies View RelatedCan you create a profile into a structural via the command line?
View 2 Replies View RelatedWe've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
Im using MEP and in MEP2010 the Offset command worked fine on my structural members, offsetting to the direction I picked.
In MEP2012 the offset command now offsets the same structural member to the opposite side of the point I pick.
The structural member is rolled 180 and the way I can correct this offset issue is to roll the SM back to 0, then the offset command offsets to the correct side.
Is there a new setting or something in 2012 that will get the offset command behaving the way it did in 2010 where it does not care about the objects properties and just offsets it correctly?
In my company we are just beginning to use Civil 3D and we are experimenting with different features and trying to compete with Microstation. A big chunk of our time (80% more or less) goes into labeling lines and objects. I sat down with a MicroStation guru and they showed me how MicroStation automatically creates labels throughout different viewports and it has a feature to prevent them from overlapping.
View 2 Replies View RelatedFound a link to some code (URL...) to automatically place an Mtext field to label assemblies. It was written for C3D 2009/2010 but I can't get it to work for 2011 - any VBA gurus care to take a look to see if it will run (or not) on 2011.
View 7 Replies View RelatedHow do I get to the settings that control what does and does not show in any given discipline - we need to update the Structural Discipline to show the non-structural walls, and non-structural portions of other walls as halftone.
View 2 Replies View RelatedCan I label a grid in ACA 2010 like this:
x1; x1.1; x2; x2.1; x3; x3.1 etc........?
I was wondering if there is a way to get layers to automatically load when i start a new drawing using the quick acess new drawing icon? if so how?
View 2 Replies View RelatedWhen I create a model space view; then drag it on the sheet; shouldn't they be linked? I mean if I go into the View drawing, move the drawing in question, then update the model space view, shouldn't that update the sheet view automatically? Theoretically speaking of course; we are talking AutoCad.
View 2 Replies View RelatedI have had this complaint for a while internally however whenever Autocad Architecture saves while using a fully functional 3d architure model it hangs when it saves.
There are no errors discovered via audit, the file has been purged, the file has annotative scaled items, there are 3 x-refs & we are working off the server.The file generally has a low amount of layers and the xreferences have also been audited and purged.
in the base file - When Autocad Saves automatically or manually I get a 30 second delay. The task manager only shows one core on the I5 being used more than the others (not fully but spikes up and down). However when I want to go crazy and save multiple times the other cores pick up accordingly (obviously). Cpu usage only shows 27% usage at it s peak (overall).
The amount of ram used remains unchanged in both scenarios.
The network indicates 3-12% usage.
In the xref of the base file (generally the sheet file which has only the base file (with all the attached xreferences) and a title block with a low res image - The model craps out for 2 minutes while it saves same task manager results as well.
I have clean xreferences with no looping which the base file houses.
I'm trying to elimitnate or upgrade (computer) whatever is the issue.
note this has also occured with standard linework files (versus using 3d autcad architure elements)
Computer specs
Intel I5 760 @2.8ghz
16gb ram
64 bit OS win7 pro
Quadro FX 580 with dual screen
few of our systems are not loading the xrefs automatically. it show as UNRESOLVED until reload it manually. also this systems are not able to attach / overlay xrefs as relative path.
View 7 Replies View RelatedIs it possible to add an architrave to a door opening automatically.
I.e wall is 150mm thick and door is 1010mm wide and 2100 high. can the architrave go round the edge of the opening and adjust if the door shrinks to 910mm
I have noticed when I go to open a file there is also a recover file. Almost every file I have worked on in the last two weeks has a recover file. This causes problems if I can’t see the entire file name and accidentally start working with the recover file.
does AutoCAD 2012 automatically create recover files? I don't have unexpected shutdowns, I have never been asked to recover or create a recover file.
m in the middle of a little project and want to know if its possible to save the info that the _MEASUREGEOM command displays when applied to measure distance or angle to the project.
I used to use a lisp script to do this but that was on my PC. Im not running autocad on my mac and it wont alow me to run the script. it loads it but then gives the error
error: vl-load-com not supported on "Mac OS X Version 10.8 (x86_64)"
when i try and apply the command. Does MEASUREGEOM have a built in feature to save these details to the project i.e. next to the line or shape measured?
I went to content browser and loaded the "Plan Elevation Label" onto my tool palette when I go to place the label in the drawing it prompts for elevation and nothing else.
How can you change the rotation on the screen accept to use the rotation command?
The tag itself is referencing a block I went to the block and changed the block now if I go to insert the multi view block it prompts for rotation but not to edit the attribute is there any way to get it to do both?
I am trying to model I-Beams to s solid. I put 3d polyline around the front "I" then a path down the middle of the beam. I have tried extrude, sweep with aligned to path, and sweep not aligned - then put a patch on both ends. Use the command "surfsculpt" and it will not convert due to not being water tight. I delete the 3d poly and path line before patching.
We only have 2011 - Civil 3D.
I'm running Inventor 2013 professional and I want to design a steel structure for stress analysis. But I can't find any DIN H-beams (HEB, HEA in accordance to DIN 1025) in the "insert frame member selection".
Isn't it possible to use DIN H-beams in Inventor frame generator? Can I add my own parts to the library for stress analysis?