Revit 2010.I'm trying to change the temp dimension size. (Can read the 8pt.?) I've looked at the .ini file and don't see where I can change it. I've also read where it can be changed via some 'option'. Under which tab and panel is the 'option'?
View 5 RepliesWhy would a window be movable by dragging but not movable by changing the temporary dimension? It's not pinned.
It works fine for the walls, but no matter what I put in the dimension value it won't budge the window an inch.
Is it an error in my family or is there something wrong with the project? I've been having a lot of problems with this one. I feel like it's all the funny angles, but the window and the door are in the same freaking wall so why should that matter?
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
I am sorta of new to Revit. I have been using it off and on for about 3 years and I have one burning question. What and how does Revit determine where the temp dimension is based off of when you are placing new walls? I have had the temp dimension jump all the way across a plan to find a wall that I drew 3-4 hours ago and has no relevance to the current wall I am drawing. The space I am currently on has a geometric relationship to the walls around it, not to a partition wall 200 feet away with no relationship to the current space. Yes I understand the building as a whole has a relationship to all parts within, but I think you get the drift.
View 1 Replies View RelatedIf rounding dims to the nearest 1/8 inch, what settings have to be changed to make permanent and temp dims be the same value?
View 2 Replies View Relatedis it possible to have a dimension style setup that shows the dimension text inline with the dimension - without having to move it?I have been looking but cannot seem to do it - is it possible and I am just missing it?
View 1 Replies View RelatedIs there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View Relatedi'm making an isometric drawing. so i use oblique command everytime i need to convert dimension oblique at 30 degrees. is there any setting that the default system gets to this oblique thing so the action of selecting Dimension> Oblique doesn't need to be repeated? just like we switch ORTHO on and off , is there a setting for oblique dimension on or off too? i'm using autocad 2010 LT
View 8 Replies View Relatedwhat dimension setting controls the distance in which dimension text is offset when it doesn't fit between extension lines.
See attached image for example.
Setting a lineweight for the dimension objects,As the dimension object contains: text, dimension line and extension line and behaves as a block, then why the arrowhead (oblique) of the “dimension line” doesn’t follow the lineweight chosen for all the dimension objects?why the "arrowhead" (oblique) is thicker than other dimension elements?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Any method to set all the Tolerance Types for a GeneralDimension via VBA.
The Tolerance object, accessible via the GeneralDimension object, offers methods to set Deviation, Fits, Limits & Symmetric tolerance types, but I can’t find a way to set other Tolerance types, such as Reference, Basic, Max & Min
What is the ideal dimension style setting for metric say 1:100 scale. See my setting on the attachment.
View 8 Replies View RelatedLooking for the method to query oDrawingDims.Tolerance. to see if SetToSymmetric (.0625) is the current value for a given dimension.
oDrawingDims.Tolerance.Type results in 50377984, no matter what method is active in the dimensions.
From Here. You get the Loop to reset,
'symmetric example' Set a reference to the select set of the active document.
DimoDocAsDrawingDocumentoDoc=ThisApplication.ActiveDocument' Find all selected occurrences and add them to an ObjectCollection.DimoDrawingDimsAsDrawingDimension'Loop through all dimensionsForEachoDrawingDimsInoDoc.ActiveSheet.DrawingDimensions'set Tolerance MethodoDrawingDims.Tolerance.SetToSymmetric(0.5)Next
As well as this code to reset to default if a tolerance falls with in a certain set values,
' Set a reference to the select set of the active document.DimoDocAsDrawingDocumentoDoc=ThisApplication.ActiveDocument' Find all selected occurrences and add them to an ObjectCollection.DimoDrawingDimsAsDrawingDimensionForEachoDrawingDimsInoDoc.ActiveSheet.DrawingDimensions'Loop through all dimensionsIf oDrawingDims.Tolerance.Upper = ("0.15875") And oDrawingDims.Tolerance.Lower=("0")oDrawingDims.Tolerance.SetToDefaultEndIf
Next
Autodesk Inventor 2010 .idw Drawing Detail - Where is the default setting for "Full Dimension Line" so that I can set it to always be on when placing a linear diametric dimension? I would prefer to turn it off on the few occasions when dimensioning a diameter on a Detail View that does not include the center line rather than each and every diameter on a section view. This is necessary because a diameter symbol does not show up in the diameter dimension unless the full distance line it is selected, which is not always possible. I am aware of the Application Option setting that allows Linear Diametric as a preference, which becomes the default for all dimensions, and it is user specific rather than document specific.
View 2 Replies View RelatedWe have, as our standard library default dimension style, a 1/32 fractional style, called "1/32-FRACTION". Various Object Types, like Linear Dimension are set to this Object Style. When I create a drawing, then these Object Defaults are in effect.
This means that, doing nothing while executing a dimension command, I get fractional dimensions by default. This works good.
However, sometimes I want to create a drawing where the default dimension style is "X.XXX-DECIMAL" without changing the Object Defaults found in the style library. I've tried to make the changes from within the style library and then save this as a template. However, when I try to make a drawing based on this template, Inventor states that the styles in the template differ from the styles in the library" and then busily goes about undoing what I careful did.
So I'm hoping there is something in the API I can call on to do this with a macro. Is it possible to write a macro that after you start a drawing, flips all the various Object Styles from "1/32-FRACTION" to "X.XXX-DECIMAL"?
I am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it.
I don't have this problem at lower resolutions
Here's a quick tip where you can set the magnification of "View > Print Size" to reflect the actual physical size of your document.
1. Measure the horizontal viewable size of your monitor or laptop screen. For example: 13.75 inches.
2. Note your horizontal resolution. 1366 pixels for instance.
3. Divide pixels into inches to get your screen resolution per inch. 1366/13.75 = 99.3 pixels/in
4 In Photoshop's Preferences > Units & Rulers, enter this value under New Document Preset Resolutions shown in the screenshot. Save and close.
After that,when you select Print Size,the document and even the onscreen rulers will reflect actual size. Now with Open GL graphics cards being fairly common,the odd magnification needed for those results won't appear jagged.
As lame as it sounds, im making a Bebo Page for a competition at work. I need to make the images have certain dimensions, and a max size, eg 760x375 pixels, and max size of 40K.
I cant find anywhere that i can set the max file file size and optimise the quality of the jpegs.
Right now they are poor quality when i finally get them small enough for uploading.
Surprised I could not turn this up in the Search. Whenever I open a new image to resize it, it does not change size, but sometimes I have seen it larger than this standard size. I need more space for my work, I dont like working with Zoom, or small print. How can I fix setting new image size so the entire background will increase?
View 10 Replies View RelatedI crop all my pics at 8.5 x 11.How can I change my default to that size instead of highlighting the crop overlay and changing it to 8.5 x 11 for each photo.
View 6 Replies View RelatedCurrently I import raw images to my desktop, view in Bridge, make adjustments in Raw then batch process within photoshop, into JPG's.
The jpg resolution is always 240 pixels/inch How can I manually change the default image size??
Where in my work flow should this be set? In Photoshop, Raw image converter or bridge? I am using CS 4.
In X6, I select the Text tool, then in the docker or on the tool ribbon I set the point size to, say, 12 points.
But, with the Text tool still active, when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
Next time I select the Text tool, the point size shows as 12. But when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
How can I arrange for all artistic text I deposit to have a certain point size I choose.
I using Apple Pro res HQ 1920x1080 source files. I'm setting up my sequence to be the same size. However, Smoke resizes everything.
View 3 Replies View RelatedWhy the paper size won't set to A1.
See attached clip and picture of the printer default setting.
how to size the grid and set it to snap to the grid. I work with 96 dpi pixel art and need it to snap to each pixel which is actually 6 pixels at 96dpi.
View 2 Replies View RelatedSetting the height of the masonry stone,
I couldn’t figure out how the height of the masonry stone can be set.
For example, in the attached screenshot, I wanted the height to be 0.26 meter then how this can be done?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Where is the setting to tell the section line to begin? This line is cutting through our callout annotation circle, which happens to be sized larger than Revit’s default.
View 2 Replies View RelatedI am trying to find a way to set a particular type in a family as default so that when the family is loaded, that type is what I am inserting.
View 3 Replies View RelatedCan we set osnap on inserted image in Revit interface so that we can easily select the midpoint, endpoint etc. See the attachment for clarification.
View 6 Replies View RelatedCan Temporary Dimensions be turned off and on with a setting.
View 5 Replies View RelatedRunning Mac os x 10.8.2 and Photoshop CS6. I have an Epson R2880 and so far only used Epson paper. I was able to find all the paper settings but i decided to buy a new German paper.
I downloaded the ICC profile, copied it to /Library/ColorSync/Profiles (and actually any other path that i could find in there). When i open the print dialog i cannot set that paper in either Photoshop or the Epson dialog.
I then removed ALL the ICC files from that path and... surprise. All the profiles are still shown in Photoshop.
I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies View Related