As lame as it sounds, im making a Bebo Page for a competition at work. I need to make the images have certain dimensions, and a max size, eg 760x375 pixels, and max size of 40K.
I cant find anywhere that i can set the max file file size and optimise the quality of the jpegs.
Right now they are poor quality when i finally get them small enough for uploading.
I am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it.
I don't have this problem at lower resolutions
Here's a quick tip where you can set the magnification of "View > Print Size" to reflect the actual physical size of your document.
1. Measure the horizontal viewable size of your monitor or laptop screen. For example: 13.75 inches.
2. Note your horizontal resolution. 1366 pixels for instance.
3. Divide pixels into inches to get your screen resolution per inch. 1366/13.75 = 99.3 pixels/in
4 In Photoshop's Preferences > Units & Rulers, enter this value under New Document Preset Resolutions shown in the screenshot. Save and close.
After that,when you select Print Size,the document and even the onscreen rulers will reflect actual size. Now with Open GL graphics cards being fairly common,the odd magnification needed for those results won't appear jagged.
Currently I import raw images to my desktop, view in Bridge, make adjustments in Raw then batch process within photoshop, into JPG's.
The jpg resolution is always 240 pixels/inch How can I manually change the default image size??
Where in my work flow should this be set? In Photoshop, Raw image converter or bridge? I am using CS 4.
Running Mac os x 10.8.2 and Photoshop CS6. I have an Epson R2880 and so far only used Epson paper. I was able to find all the paper settings but i decided to buy a new German paper.
I downloaded the ICC profile, copied it to /Library/ColorSync/Profiles (and actually any other path that i could find in there). When i open the print dialog i cannot set that paper in either Photoshop or the Epson dialog.
I then removed ALL the ICC files from that path and... surprise. All the profiles are still shown in Photoshop.
Adobe CC layers setting for exporting a Ai file to Photoshop PSD file
View 4 Replies View RelatedAny way to set the character leading setting so that it auto-adjusts when you adjust font size? I think my Ps used to do that. Now, whenever I change font size, I have to adjust the leading, too.
View 5 Replies View RelatedSurprised I could not turn this up in the Search. Whenever I open a new image to resize it, it does not change size, but sometimes I have seen it larger than this standard size. I need more space for my work, I dont like working with Zoom, or small print. How can I fix setting new image size so the entire background will increase?
View 10 Replies View RelatedI crop all my pics at 8.5 x 11.How can I change my default to that size instead of highlighting the crop overlay and changing it to 8.5 x 11 for each photo.
View 6 Replies View Related'm using a Mac with the latest version of the Creative Cloud. I've been stuck with the sillest problem ever with the Character Tool.It started with the size tool. If I set it to 200px and press enter, it will suddently jump to 11443.91 px. It does the same thing if I use the slider (clicking the tT and sliding up and down), it will show me the right number, but the second I let it go, it jumps to a complete random number. If I put it at 300 px, it goes to 11443.91px ... again.Now, all the other character tools are doing the exact same thing. The line-height, the tracking, everything.
Here's all my system info if you need it:
Adobe Photoshop Version: 14.0 (14.0 20130423.r.221 2013/04/23:23:00:00) x64
Operating System: Mac OS 10.8.4
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
[code]...
Each time I open a new image in ACR and then open image the editing screen reverts to QUICK mode and a smaller screen size. I then have to click to change it to EXPERT mode and then click to make it full screen. I never had this problem with PSE 10.
(I am bringing RAW images in from outside and not via Organiser.)
Is there a way to set these defaults?
In X6, I select the Text tool, then in the docker or on the tool ribbon I set the point size to, say, 12 points.
But, with the Text tool still active, when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
Next time I select the Text tool, the point size shows as 12. But when I click to deposit artistic text, the point size changes to 24 and the text is deposited in that size.
How can I arrange for all artistic text I deposit to have a certain point size I choose.
I using Apple Pro res HQ 1920x1080 source files. I'm setting up my sequence to be the same size. However, Smoke resizes everything.
View 3 Replies View RelatedRevit 2010.I'm trying to change the temp dimension size. (Can read the 8pt.?) I've looked at the .ini file and don't see where I can change it. I've also read where it can be changed via some 'option'. Under which tab and panel is the 'option'?
View 5 Replies View RelatedWhy the paper size won't set to A1.
See attached clip and picture of the printer default setting.
how to size the grid and set it to snap to the grid. I work with 96 dpi pixel art and need it to snap to each pixel which is actually 6 pixels at 96dpi.
View 2 Replies View RelatedI'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies View RelatedIs there a way I can set this with a switch appended to the "...gimp.exe" shortcut? Or any way that I can set it at all?
View 2 Replies View RelatedI set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !
When I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
Setting the label size for multiple thematic rules, I couldn’t figure out how the label size can be set for multiple thematic rules in one go (attached).
View 1 Replies View RelatedI have created an item made up of lines, circles and arcs. One side line distance will control all other sides, circles and arcs. I applied geometric constraints and then Dimensional constraints. D1 is the distance that will control all other objects. I have it working so that when I change D1, the sides adjust accordingly and the arcs and circles keep their geometry.
I was wondering if there is a way to add a range of distances for D1 so that if someone goes below the minimum value, nothing happens and if you go above the maximum value, nothing happens? I know if you make a block, you can make a list of distances for D1 to move. Is there a way to do this in the design drawing? Although, I don't just want a set range, I would like any distance between, say, 8 - 12 inches.
I tried to set some parameters in the Parameters Manager with no luck. Maybe there is an expression to use? Where would you find this expression if there is one?
Is it possible to make the program to stop rounding when I try to set the image size? I'm putting in a size that is like 4.569 and it rounds it to 4.57 and I don't want it to round it.
View 2 Replies View Relatedis there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies View RelatedWhy is the image on the screen small the the actual file size. As an example I have an image thats 5.7x5.7 @72DPI. My canvas says 100% but the image on screen is about 3x3.
View 3 Replies View RelatedCan someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
I am running XP and cannot set CS4 to be the default file to open my images. When I right click a file, select "open with", and choose CS4, nothing happens. I did not find this problem with CS3 or CS2, both of which I have uninstalled.
View 6 Replies View RelatedRecently when I open a "New File" it opens up as a slice. How can I correct that. I don't want to work with slices. How can I open a new file in the default setting?
View 5 Replies View RelatedI have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q
dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description
el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle
er (tblobjname "style" "Romans") ; new value for MLEADER Text Style
) ; end set
(entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
 When I save a file to jpeg the image size in photoshop remains the same as it was as a tiff file BUT according to the information that comes up in windows properties the file is much smaller (300k vs 2.9mg).  Can you advise me which is the correct file size?  If the correct size is the one showing in windows (300K) does mean that the file compressed in JPG and lost a lot of information?
 and if this is the case how can I prevent that from happening and still save the file as a JPG?  [ I would like the image to remain the size photoshop shows it to be] . Thank you very much.
How can i create a digital file for print with a CMYK setting?
View 3 Replies View Related