I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 RepliesSetting the scale in a view port in paper space? 2010
View 3 Replies View RelatedI have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
Why the paper size won't set to A1.
See attached clip and picture of the printer default setting.
I set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !
Running Mac os x 10.8.2 and Photoshop CS6. I have an Epson R2880 and so far only used Epson paper. I was able to find all the paper settings but i decided to buy a new German paper.
I downloaded the ICC profile, copied it to /Library/ColorSync/Profiles (and actually any other path that i could find in there). When i open the print dialog i cannot set that paper in either Photoshop or the Epson dialog.
I then removed ALL the ICC files from that path and... surprise. All the profiles are still shown in Photoshop.
how i can insert a new paper size or edit a paper size in plotting
View 2 Replies View Relateda)) I have a simple drawing attached with color outlines.How do i fill in the shapes with color.The blue outline filled in Blue and the red outline filled in Red
b)) How do i set the drawing space so as it fits to a A4 size paper?
By working in millimetres instead of metres will slow things up with my file. My 0,0 point refers to the actual survey co-ordinates which I need to continue to use as regularly share my file with the surveyor and we need to be working on the same 0,0 point. Because I am working in mm 0,0 is therefore further from my drawing that it would be in m. Will changing to metres make a significant difference to me? My file has 34 layout pages and even more viewports which I would have to re scale if I changed the units in my drawings or is there a simpler way of doing this than rescaling the drawing by a factor of 0.001?
View 4 Replies View RelatedBest practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies View RelatedQ I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9.
View 3 Replies View RelatedUsing ObjectARX2013, I have to solve problems.
When I plot PNG or JPG file, its paper size is needed to edit according to drawing size.
I want to know the source code or function(or method) - C#.
I have tried numerous times to make my paper size and actual plot size the same. My paper size is 24 x 36 but for some reason it rotates the paper and the output is 36 x 36, every time! When I look at it on the preview, it looks correct but then the paper comes out with a foot of paper at the top of the drawing. I've created new page sizes, etc.
View 9 Replies View RelatedI am rebuilding the entire back porch.
I would like to set the scale so i can visually see where my joists , hangers , tiers, etc go.
How do i set an accurate scale for a drawing such as this?
Setting Scale .porch.dwg
THIS DRAFT is most certainly NOT TO SCALE.
As usual, i am NOT sure i am asking the right question.
I am trying to use the smallest of the squares in GRID to equal "X" amount of inches so the entire drawing will fit. I do NOT need to use grid if it there is an easier way. No contractor...I am the only one using this and its just to make my initial materials list and get a picture of how things will go....
Is there a way to print out the exact scale just like using manual printing or I just can use
// a 1 inch: 2 units scaleacPlSetVdr.SetStdScale(acPlSet, 0.5);// a 2 inches: 1 unit scaleacPlSetVdr.SetStdScale(acPlSet, 2);
By the way, setting for example (acPlSetVdr.SetStdScale(acPlSet, 2.04);
I get eInvalidInput error.
There are several ways a user can set the scale of a paper space layout viewport.
Properties palette.
ViewportScale_Properties.PNG
Quick Properties.
ViewportScale_Quick.PNG
From the Taskbar. You'll find this in the lower right-hand corner of your screen.
ViewportScale_Taskbar.PNG
Via the Viewport Toolbar.
ViewportScale_Toolbar.PNG
Or manually using the Zoom > Scale > nXP option at the Command line. This method requires the user to enter a scale factor.
For a list of frequently used scale factors, both imperial and metric, refer to this thread. [URL] .......
I set up my paper space to A1 size so i have plenty of room to dimention. However, if i measure what AutoCAD has set up as 'A1' then it is 3.2cm x 2.2cm, the atual size of A1 paper is 59cm x 84cm. If i were to print this page on A1 paper it still comes out the right size on A1. I know it doesnt sound too serious but i would like the paper space in the right scale so i can have my text set to the right hight and my bubble reference boxes the right size for when it is printed. (it also does this on all paper sizes, im just using A1 today)
View 2 Replies View RelatedI am trying to setup some pre-made paperspace layouts with legends and details. These will not change from project to project so by doing this ahead of time it can save time provided we can get the line types to display correctly!
How we do things now is we set the global scale factor, GSF, to suit the drawing scale of our floor plan. This is typically 1/4", 3/6" or 1/8" if were working in Imperial units.
The issue in doing this is that when we change the GSF the line types drawn in model space do not display correctly. We could go in and adjust everything manually on each project but this is laborious and time consuming.
Is there a way to set up sheets in paperspace so that they will always display the same regardless of the GSF?
I am using AutoCAD LT 2011.
I have this layout inside cloud area i want to standard setting like if i want to print on A3 paper which text height i need to use dimension title block etc.
2nd question is that inside cloud area there is some point (Red) like M1 to Mxxx i need to get coordinate in table is there any lisp to make table with coordinate otherwise i need to pick one by one point p
I have just updated to Autocad 2013. While working on existing drawings (previously created in V2012), I am having issues with the SCALE command. Most times, but not always, when I add a line or block, with a base point on an existing line or object and try to scale it, I get an "extremely small scale factor ignored" message, although I did not get a chance to enter a scale factor. While it appears most times, but not always, if I draw a new line in empty space on that same drawing, I am able to use the SCALE command without problems. I also have the same issue when trying to scale an existing line or block, most times but not always.
Here is a copy of the command line while I am trying to make it work:
Command: l
LINE
Specify first point:
Specify next point or [Undo]: 100
Specify next point or [Undo]:
Command: sc
SCALE
Select objects: 1 found
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
Command:
SCALE
Select objects: Specify opposite corner: 1 found
Select objects: Specify opposite corner: 1 found, 2 total
Select objects:
Specify base point:
Specify scale factor or [Copy/Reference]:
Extremely small scale factor ignored.
If you notice, it does not give me the chance to enter a scale factor. As soon as I pick the base point, it skips over to the error message, yet displays the scale factor prompt with a blank factor. I'm experiencing this issue on various files (not all but most), so I don't think it is a corrupt file. Why I get this and if I can correct it?
When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
I am trying to insert a block into a file in Acad 2014 and it comes in too large. If I insert the same block into the same file using Acad 2012 it comes in at the correct scale. Doesn't seem to matter if insunits is 0 or 1, or insunitsdefsource or insunitsdeftarget are also 0 or 1.
There must be some variable or variables I'm missing.
I have a block that i would like to scale based on the plot scale when plotting.
We set up our drawings full size and occasionally we want to plot them at half size. We do this by setting the plot scale to 1:2 (custom) in the plotting dialog. We have a few blocks that we want to print at the same size on paper, essentially become twice as big.
Is there is a way to fix the size or just set a few scale states and have them automatically adjust based on the plot scale (not drawing/annotative scale)?
AutoCAD 2013 2D - when scrolling the viewport scale list, the viewport zooms with each scale instantly.
View 1 Replies View RelatedI can read a view scale with:
BaseViewScale = oDoc.Sheets.Item(1).DrawingViews.Item(1).Scale
But When I try to use the following line to change the scale, I get a compile error.
oDoc.Sheets.Item(1).DrawingViews.Item(1).Scale = BaseViewScale
What type of variable should BaseViewScale be (single, double, string)?Inventor Routed Systems 2010.
Subscription Advantage Pack SP3
Vault Collaboration 2010
Windows 7 x64
Dell Precision M6400 Covet
My viewport scale list only has metric and I would like to add a list of imperial scales for general use. So far I can only add, through Annotation Scaling panel and Scale list for an individual drawing so once it is closed I lose the scales.
how do I list my imperial scales permanently for use throughout the program.
I'm on Autocad 2010.
When setting the viewport scale how do I know if I'm scaling to an A3 plot or A1 etc.
View 9 Replies View RelatedI do most of my stuff on A3 and have my paper space sheets set up for this no problems. When I have my drawing in paper space i usually set the scale to what I want. Now, when I am still in paper space with my correct scale, I want to change to model space and move or position the drawing exactly where I want it on my sheet , without it going out of scale. I have a very sensitive middle button on the mouse, and when I hold it down to move the drawing around, it goes out of scale I want to lock the scale first before moving the drawing around.
View 7 Replies View RelatedI cant seem to scale my drawing to fit right on an A3 sheet of paper. I have done the drawing in mm its my first project.
View 9 Replies View RelatedWorking in acad2011, I have a 3D model and i did flatshot. The obscured lines I chose to be - - - - - (ISO02W100). Now i have to annotate and get my paper layout rdy for printing.
Questions:
1. Is there a way of scaling lines that make up my flatshot image in model space?
2. How can i scale the lines in paper space?
The - - - - - lines just don't seem right in my paper space.