Working in acad2011, I have a 3D model and i did flatshot. The obscured lines I chose to be - - - - - (ISO02W100). Now i have to annotate and get my paper layout rdy for printing.
Questions:
1. Is there a way of scaling lines that make up my flatshot image in model space?
2. How can i scale the lines in paper space?
The - - - - - lines just don't seem right in my paper space.
I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
I have an issue with linetype scale. I have a certain part of my drawing with dash lines at a linetype scale of 1000. In Model space it is fine but when I change to Paper Space the lines become solid. I have tried increasing the linetype scale in Model space to compensate for the scale in Paper space but the lines are still solid.
View 7 Replies View RelatedI have trouble figuring out dash lines. If i change global scale factor or current object scale in a spedific paper space,
the other page will be affected...
I set up my paper space to A1 size so i have plenty of room to dimention. However, if i measure what AutoCAD has set up as 'A1' then it is 3.2cm x 2.2cm, the atual size of A1 paper is 59cm x 84cm. If i were to print this page on A1 paper it still comes out the right size on A1. I know it doesnt sound too serious but i would like the paper space in the right scale so i can have my text set to the right hight and my bubble reference boxes the right size for when it is printed. (it also does this on all paper sizes, im just using A1 today)
View 2 Replies View RelatedI am trying to setup some pre-made paperspace layouts with legends and details. These will not change from project to project so by doing this ahead of time it can save time provided we can get the line types to display correctly!
How we do things now is we set the global scale factor, GSF, to suit the drawing scale of our floor plan. This is typically 1/4", 3/6" or 1/8" if were working in Imperial units.
The issue in doing this is that when we change the GSF the line types drawn in model space do not display correctly. We could go in and adjust everything manually on each project but this is laborious and time consuming.
Is there a way to set up sheets in paperspace so that they will always display the same regardless of the GSF?
I am using AutoCAD LT 2011.
I do most of my stuff on A3 and have my paper space sheets set up for this no problems. When I have my drawing in paper space i usually set the scale to what I want. Now, when I am still in paper space with my correct scale, I want to change to model space and move or position the drawing exactly where I want it on my sheet , without it going out of scale. I have a very sensitive middle button on the mouse, and when I hold it down to move the drawing around, it goes out of scale I want to lock the scale first before moving the drawing around.
View 7 Replies View RelatedI have a drawing in model space the i drew to scale of 1'=1' and I went to paper scape to put the drawing in my title block using Viewports. highlighted the viewport and went to properties to give the drawing a scale so it would maximize the Viewport area, on my 22"x34" paper. but under the standard scale 1/64"=1' is too big and 1/128"=1' is too small. the simple solution is zoom extents but then in my title block i have to put NTS. I would like to add to the standard scale or be able to set the customer scale to a whole number. EX. 1:1000 or 1:150, etc. etc.
View 3 Replies View RelatedHow to make the drawings on scale on paper space.
View 2 Replies View RelatedI'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
How to set-up the drawing so I don't have to change the ltscale between model space and paper space in order to get dashed lines to read? What is the ideal global scale factor for an architectural drawing in model space?
View 9 Replies View RelatedI'm using mm, and i want to create a custom scale which is not in the list of my standard scale in the viewport properties. If i want 1/200 for example and this is not in the list how do i set the custom scale?
View 4 Replies View RelatedI want to create a simple scale bar in a paper space layout, that is dynamically linked to the scale of the viewport.
I've searched and come across a few dynamic scale bars on the web and a few forum discussions, but I just can't work out how to create my own from scratch...
Civil3D 2013 (infrastructure suite)
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), GTX680, Win7Pro64
Setting the scale in a view port in paper space? 2010
View 3 Replies View RelatedI have got a large drawing with multiple viewports and some layers that are shown in model space won't show when I access model space from paper space (through the viewport). I have had a look at the layer manager through the viewport and everything is switched on, there is no viewport freeze activated but still I can't see the lines in the viewport in paper space (either in model or paperthrough the template).
View 8 Replies View RelatedI want to print the drawing from the paper space, but I have there thick lines of attached dwg files. In the model space everything seems to be OK. How to change it?
View 2 Replies View RelatedI'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedI am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedI use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.