AutoCAD Map 3D :: Setting Label Size For Multiple Thematic Rules
Nov 29, 2013Setting the label size for multiple thematic rules, I couldn’t figure out how the label size can be set for multiple thematic rules in one go (attached).
View 1 Replies
ADVERTISEMENT
AutoCAD Map 3D :: Export / Import Thematic Rules
Nov 9, 2011I set the thematic rules for a connected data (example .shp file) in the style editor, can I use this thematic rules automatic for other connected data? This other connected data (other, slightly modified .shp file) have same values as the first.
(I think this so, as in arcview the .avl file, or in arcmap the .lyr file)
Can I export, and than import the thematic rules?
AutoCAD Inventor :: ILogic Rules Setting
Jul 23, 2012I'm trying to set a rule in which i have 2 i parts that i can change the length of . I want a rule where if i change one of them it changes the other to fit with it.
View 1 Replies View RelatedAutoCAD Inventor :: How To Run Multiple Rules Simultaneously
May 3, 2012I have an assembly with multible parts which all have iLogic rules in them. I want to controle when the rules are executed in each part, thus I have set them as "Don't run automatically". These rules are iTriggered by the top assembly, if they are active.
Is there a possibility of how I can run multiple rules simultaneously?
The code below is an example of the controle rule that determines the rules to be run but it takes one rule at the time...
IfComponent.IsActive("5580 Heating element package 1")=TrueThen
iLogicVb.RunRule("5580 Heating element basket 1", "iTriggerRule")
EndIf
IfComponent.IsActive("5580 Heating element package 2")=TrueThen
iLogicVb.RunRule("5580 Heating element basket 2", "iTriggerRule")
EndIf
.
.
.
up to x
I have also tried with For - Next statements...But the rules are run in the order that tey are written...
As the computer has a lot of memory in reserve; I want somehow all the iTriggerRules to be run at the same time as this would save a lot of time.
AutoCAD Civil 3D :: Point Label Size Change When Label Is Moved?
May 8, 2012The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedAutoCAD Civil 3D :: Setting Label Rotation Straight Up
Mar 15, 2012Is there a way to set the Label rotation straight up instead of following the grades (at 270 ect)?
View 1 Replies View RelatedAutoCAD Civil 3D :: Setting Alignment Label Elevations
Mar 27, 2012Way to snap or drape the alignment (station) labels over a surface or bring them to the elevation of a selected surface. I'd like to know how to do this if there is a way, so when I look at surfaces in object viewer I can get an idea of where problem areas are from the stationing labels.
View 2 Replies View RelatedAutoCAD Civil 3D :: Setting Up Line And Curve Label Style
Jan 26, 2013We are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template
I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.
After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.
i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?
AutoCAD Civil 3D :: Where Is Setting For Sample Line Label Background Mask
Jun 17, 2013Where is the setting for the sample line label background mask? I have some sample lines that will be plotted on top of an aerial photo, and the black box background looks terrible. I'd like to turn it off. I found the contour label background fine and I switched those to False without much of a problem, but I can't seem to locate the ones for the sample lines.
View 1 Replies View RelatedAutoCAD Map 3D :: How To Make An Thematic Map
Dec 20, 2012I am trying to make an thematic map and i want to enter at the value an interval. For example i want to dysplay all constructions that were made between 1980 and 2012 and i dont know what to write at the Value. I've tried to enter (1980,2012) but is not good
View 2 Replies View RelatedAutoCAD .NET :: Thematic Based On Attribution?
Jan 8, 2013Is it possible to do Thematic based on attribution display for a layer.
For eg: I have a layer called CIty with object data for name, country, etc. I would like to display a common symbol for all city points in ASIA, a different symbol or color for others etc. how can it be done with autocad.
AutoCAD Map 3D :: Parcel And Building Number - Create Topology / Thematic Query
Dec 5, 2011I have some problems with this drawing. I have some parcels and buildings, and a number for each of them. I attached data to parcel and building number, and I want to create topology and then to create thematic queries, based on any data attached to the numbers. And I don't know how to do that, and how can I use thematic query to show me the specific parcels based on the data I want if the table is attached to the parcel number and not on polylines. Same thing on buildings...
For example: I want to make some thematic maps based on tax value, street where the parcel is located, area, or on buildings: how many levels they have, and more.
I uploaded a example file to be more specific, with data attached to numbers, without topology created (drawing cleanup is done).
AutoCAD Civil 3D :: Multiple Station In One Label
Oct 30, 2012Im trying to make a label that will call out pipe replacement in reference to an alignment. I know how to call out from multiple alignments, but I need multiple stations from the same alignment, such as sta xxx to sta xxx.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
AutoCAD Inventor :: Paper Size Setting To A1
Jul 15, 2009Why the paper size won't set to A1.
See attached clip and picture of the printer default setting.
AutoCAD Civil 3D :: Label Size Reduce In Viewport
Jul 17, 2013I am using autocad civil 3d viewport. I am creating view frame. Even I try to edit my label location through viewport double click edit. It will reduce label size 25.4 times.
View 5 Replies View RelatedAutoCAD Civil 3D :: Line Label Macro For Multiple Labels
Apr 12, 2013Is there a way to create a macro to label a line with a particular style?
I label my feature lines with three styles: multiple - segment grade, multiple - segment start elevation & single - segment end elevation. I want to make a macro for each of these that I can put on a button. It would be nice to combine the two multiples too if that is possible.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD 2013 :: Setting Scale To Paper Size
Sep 17, 2012I'm drawing something much larger than the paper so I would like to chose paper size A(8.5x11) set the scale then print it out on A(8.5x11) paper. For example: my desk is approximately 65inch x 30inch and I want to draw and print it on A(8.5x11) paper. I want it to print with the drawing being accurate to scale...how do I do this?
View 9 Replies View RelatedAutoCad :: Setting Page Size And Grid Scale?
Jul 18, 2013I set up a new page thus (I live in a country which uses metric units, so ...):
Drawing Units Setting18-07-2013 9-24-06 AM.jpg
Then:
Command: '_limits
Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: 0.00,0.00
Specify upper right corner <3.5000,2.7000>: 3.65,2.74
Command: C
CIRCLE
Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 1000,1000
Specify radius of circle or [Diameter]: 250
Command:
and I get:
Range Problem 18-07-2013 9-36-57 AM.jpg
The circle was centred at x=1000 metres, y=1000 metres, yet it displays right down at the bottom left of my screen. Compare the radius of the circle to the distance from the centre to the origin - it's nothing like 1:4! Look at the coordinates for the cursor!
Zooming in and zooming out has no effect on the huge dimensions indicated by the coordinates.
I know this must be simple because it is not mentioned in any textbook or tutorial I have been able to find. Authors don't seem to think it is important, but it's driving me nuts! The question is this:
How do I set the page size and grid scale to something sane?
I am pretty sure that this scale problem is at the root of many of the other problems I am having. A14 is doing it's job faithfully but the display is so small that I cannot see what is happening !
AutoCAD Map 3D :: Setting Background Transparency Color For Multiple Images
Sep 11, 2013I have imported a number of raster images into a drawing and wish to turn the "blank" bits transparent. I can set them all to "Background transparency = YES" in the Properties bar, but as far as I can see I need to go through each one individually to set the relevant transparency color, since as soon as I select more than one tile the "Transparency color" tab disappears.
Is there a way to do a multiple select as the "blank" color is the same for all the tiles? I'm planning to use a lot of tiles and this will be incredibly laborious and inefficient otherwise. I am using Map 3D 2011.
AutoCAD 2013 :: Does Support Multiple Lines Of Vertical Setting On Mtext
Jan 15, 2013I guess it does NOT support it because it seems that it does NOT work properly. For example, in case of multiple lines of “Horizontal” setting, it works properly like followings. But in case of multiple lines of “Vertical” setting, it does NOT work properly like followings.
Configure of “Horizontal”:
ABC
DEF
GHI
Configure of “Vertical”:
ABC DEF GHI
In my perspective, it should go downward like followings.
In my “perspective” of Vertical”:
A
B
C
D
E
F
G
H
I
We are making application software for importing DXF file from AutoCAD. If AutoCAD does not support multiple lines of vertical setting on mtex, our software also should not support it, I think. I want to know the specification for multiple lines of vertical setting of AutoCAD.
AutoCad 2D :: Setting Distance Size Limit In Linear Dimensional Lock
Oct 21, 2011I have created an item made up of lines, circles and arcs. One side line distance will control all other sides, circles and arcs. I applied geometric constraints and then Dimensional constraints. D1 is the distance that will control all other objects. I have it working so that when I change D1, the sides adjust accordingly and the arcs and circles keep their geometry.
I was wondering if there is a way to add a range of distances for D1 so that if someone goes below the minimum value, nothing happens and if you go above the maximum value, nothing happens? I know if you make a block, you can make a list of distances for D1 to move. Is there a way to do this in the design drawing? Although, I don't just want a set range, I would like any distance between, say, 8 - 12 inches.
I tried to set some parameters in the Parameters Manager with no luck. Maybe there is an expression to use? Where would you find this expression if there is one?
AutoCAD Civil 3D :: Section View Label Text Size In Paper Space
Sep 11, 2013When I use a layout size such as A3 in paper space, the section view label text size is the same as it is in model space (when both annotative scales are the same). However, when I choose 11x17 as a layout size, the section view label text size is exetremly small.
View 2 Replies View RelatedAutoCAD Civil 3D :: Creating Excel Table For Populating Point Loc And Label Multiple Files
Jan 18, 2013I have some data in the form of
point# | X | Y | Desc_1 | Desc_2 | Desc_3 |....... ect
I would like to make an excel table that i can create multiple points from and make that table dynamic, ie if i edit the table the points will change.I would be labeling the points according to the different desc_# in multiple drawings
Is there any way to do this? I have messed with creating a user defined property classification and creating a new point file format, but i want that point file I imported to be dynamic, and if I change values the values will change in all my drawings.
AutoCAD Civil 3D :: Label Style Text Size As Percent Of Screen (model Space)
Jun 17, 2013I've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
AutoCAD Visual LISP / AutoLISP :: Mleader Style - Arrow Head Size Setting
Nov 17, 2009I have some working code that sets the Text Style name to ROMANS inside my Mleader Style called ARROW. Here it is:
(setq dict (dictsearch (namedobjdict) "ACAD_MLEADERSTYLE") ; start setq q
dict1 (member (cons 3 "Arrow") dict) ; code 3 is Mleader Style Description
el1 (entget (cdr (assoc 350 dict1))) ; code 350 is dictionary entity handle
er (tblobjname "style" "Romans") ; new value for MLEADER Text Style
) ; end set
(entmod (subst (cons 342 er) (assoc 342 el1) el1)) ; code 342 is MmTextStyleId - write new vale to mTextStyleId
I want to modify this code so that it sets the Arrow Head Size to a specific value, say 0.125. Having a tough time figuring out the DXF codes and tblobjname to do this.
GIMP :: 2.8 - Setting Up Multiple Profiles?
May 21, 2012I use GIMP for a number of purposes, including general image editing, drawing and pixel art.
I'd like to be able to set up profiles for different hotkeys, default windows/window positions/brush settings, etc., but so far as I can find the only way to do this is to either replace/edit the settings files when loading up a different profile or changing its directory settings, neither of which is very convenient, nor am I sure if either is even sufficient.
I'm using Windows XP and GIMP 2.8.
Photoshop :: Setting Canvas Size At 300 Ppi?
Nov 3, 2013I am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it.
I don't have this problem at lower resolutions
Photoshop :: Setting Print Size
Aug 10, 2012Here's a quick tip where you can set the magnification of "View > Print Size" to reflect the actual physical size of your document.
1. Measure the horizontal viewable size of your monitor or laptop screen. For example: 13.75 inches.
2. Note your horizontal resolution. 1366 pixels for instance.
3. Divide pixels into inches to get your screen resolution per inch. 1366/13.75 = 99.3 pixels/in
4 In Photoshop's Preferences > Units & Rulers, enter this value under New Document Preset Resolutions shown in the screenshot. Save and close.
After that,when you select Print Size,the document and even the onscreen rulers will reflect actual size. Now with Open GL graphics cards being fairly common,the odd magnification needed for those results won't appear jagged.
Photoshop :: Setting Max File Size?
Jul 2, 2008As lame as it sounds, im making a Bebo Page for a competition at work. I need to make the images have certain dimensions, and a max size, eg 760x375 pixels, and max size of 40K.
I cant find anywhere that i can set the max file file size and optimise the quality of the jpegs.
Right now they are poor quality when i finally get them small enough for uploading.
GIMP :: Setting New Image Size?
Dec 27, 2011Surprised I could not turn this up in the Search. Whenever I open a new image to resize it, it does not change size, but sometimes I have seen it larger than this standard size. I need more space for my work, I dont like working with Zoom, or small print. How can I fix setting new image size so the entire background will increase?
View 10 Replies View RelatedLightroom :: Setting Crop Size
Mar 21, 2014I crop all my pics at 8.5 x 11.How can I change my default to that size instead of highlighting the crop overlay and changing it to 8.5 x 11 for each photo.
View 6 Replies View Related
