AutoCAD Map 3D :: Setting Background Transparency Color For Multiple Images

Sep 11, 2013

I have imported a number of raster images into a drawing and wish to turn the "blank" bits transparent. I can set them all to "Background transparency = YES" in the Properties bar, but as far as I can see I need to go through each one individually to set the relevant transparency color, since as soon as I select more than one tile the "Transparency color" tab disappears.

Is there a way to do a multiple select as the "blank" color is the same for all the tiles? I'm planning to use a lot of tiles and this will be incredibly laborious and inefficient otherwise. I am using Map 3D 2011.

View 2 Replies


ADVERTISEMENT

AutoCAD Inventor :: Setting Background Color

Jan 9, 2014

Inventor uses a gradient-fill gray background for the 3D views.  This has many annoyances, such as parts of the image disappear at certain rotations because they render to the same color as the background.  More seriously, when I want to print the orthogonal 3D view, I get the gray background on the printout, which looks profoundly ugly, and obscures some of the critical information I want to see. 

Is there a way to either (a) change the background to something other than gray-gradient?  (I'd settle for something like light-blue-gradient, for example) and (b) tell the print command to not print the gray background (but if I change it to solid white, this would solve the problem)

View 3 Replies View Related

Paint.NET :: Using Background Color Rather Than Transparency?

Jul 30, 2011

Specifically when I lasso a section of a screenshot and move it, I would like to leave behind a chosen background color in its place. This was easy in Paintshop but I can't figure out how to do it here. Instead, I seem to have to grab another selection, copy it and put it over the transparent part. Simple enough to do but cludgy. Looked at the manuals and couldn't find a mention.

View 2 Replies View Related

Xara :: Transparency For Web - Background Color Turns Out Black

Aug 31, 2011

This is probably super simple. I do a lot of transparency stuff for the Web. My background color for the most part turns out to be black. I get my transparency but the program I'm using at the moment does a cleaner job with white. When it's black I see a little trash of black around the edge of the graphic. In the past I've come up with white quite by accident and it was clean as a whistle. I'm exporting as PNG, True Color + Alpha.

View 3 Replies View Related

GIMP :: Transparency (Alpha To Selection) - Remove White Background From Images

Aug 20, 2011

For quite some time I've been trying to find the best way to remove a white background from images. I've checked out the sticky thread on this forum and as my image isn't of great quality and because it features quite a lot of white that won't apply.

Recently I found this tutorial which is supposed to work great (as seen in the comments). However, I think that because of a GIMP update that won't apply anymore somehow. I was hoping you guys might know what was causing it.

Everything works well until I get to step 7, where I have to select to Alpha. There it selects just the outlines, but my selection includes inner parts of the image, not just the background. And then after I invert and delete, the white that remains still has transparent parts that show up on the upper layer. So, am I doing something wrong with the Alpha to Selection, is that tutorial updated or is there a better way to remove the background from ie. a logo with just one background colour which isn't of great quality.

View 5 Replies View Related

CorelDRAW Graphics Suite X5 :: Transparency Placed On Top Of Solid Color Background

Nov 22, 2011

I have a curve fill with K100 and 50% transparency placed on top of a solid color background. [TOP]But when I turn the proof color on, or export as CMYK JPEG, or PDF, the result is as below. [BOTTOM]

View 6 Replies View Related

Photoshop :: Multiple Images On A Background

Apr 18, 2006

How do I insert images into a desaturated area of a background picture? Code:

View 5 Replies View Related

AutoCAD Civil 3D :: Hatch Transparency Setting

Jun 13, 2013

Is there a setting for hatch transparency? My work station it works fine. I have a few other users complining that is doesn't work. One user I imported my arg profile and it seemed to do the trick, but the next user I imported my arg and it had no effect.

Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS

View 2 Replies View Related

CorelDRAW X4 :: Creating Document With Same Background But Different Pics And Text On Multiple Images

Apr 16, 2011

I'm creating a large document with the same background but different pics and text on the multiple pages. I want to create a background that is not a bitmap but is still vector and that I can edit, that will automatically come up with each new page. And the kicker is that if I change one thing to the background, it will auto populate the change to the rest of the document.

The background consists of a title, a company logo, some solid fill text and pic areas. So for instance if I wanted to change the background color from green to blue I don't want to have to go to each page and change it individually.

View 1 Replies View Related

Photoshop Elements :: Open Or Drag Multiple Images To Same Window Or Blank Background

Nov 27, 2012

how do i open or drag multiple images onto the same window or blank background in elements 11?  was easy in 2.0  as all images were available on same page. where is this option in 11?

View 3 Replies View Related

Photoshop :: GIF Images Not Honoring The Background Color?

Apr 29, 2004

Here is my problem. I have this nice image. It has a soild background color of grey. (GRB is 100) But when I save it as a GIF it doesn't honor the color and changes it. Not by alot, but enough to notice it if its on a page that has GRB set to 100 also. I have tried all of the export settings for GIF.

My question is the only way to get the color to be constint do I have to use JPG? JPG images are like 5x bigger.

View 9 Replies View Related

GIMP :: Removing Color From Multiple Images?

Aug 13, 2011

1. I am making a .gif with 57 images [black silhouette] with a white background. Is there any way I can remove the background from all of the images at once (like a batch tool) rather than going through each one of them?

2. If I make a change to one image i.e. crop an image and resize it, is there a way to effect that change to all of the images Vs going through each one?

View 5 Replies View Related

GIMP :: Setting Transparency In PNG

Jun 1, 2012

[URL]

In each program I have used from Corel Photo-Paint 11, Paint Shop Pro 5 and 7, to Gimp 2.6.11 the end result is exactly the same.

I select the background Invert the selection to pull it out of the original Paste the remaining image with transparent background or make an alpha channel The background needing to be transparent stays transparent.

The moment I save the image as a PNG, close the image, reopen it, check if the Mask/ Alpha channel data remains in tact, and it does, the transparency is completely removed and the background turns to white. This happens on every one of the programs and I am just at my wits end.

There must be something, an order of operations, a color scheme, a presetup step that -everyone- knows but me, that is preventing this from having a transparent background.

View 1 Replies View Related

AutoCAD 2013 :: Location Of Setting That Controls Background Of Paperspace?

Jun 24, 2013

I am looking for the location of the setting that controls the background of paperspace. Not the printable area, but the background. See image below.

Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional

View 6 Replies View Related

AutoCAD Map 3D :: Setting Label Size For Multiple Thematic Rules

Nov 29, 2013

Setting the label size for multiple thematic rules, I couldn’t figure out how the label size can be set for multiple thematic rules in one go (attached). 

View 1 Replies View Related

AutoCAD Civil 3D :: Where Is Setting For Sample Line Label Background Mask

Jun 17, 2013

Where is the setting for the sample line label background mask?  I have some sample lines that will be plotted on top of an aerial photo, and the black box background looks terrible.  I'd like to turn it off.  I found the contour label background fine and I switched those to False without much of a problem, but I can't seem to locate the ones for the sample lines. 

View 1 Replies View Related

AutoCad 3D :: Change View From Perspective To Isometric / Setting White Background

Dec 26, 2013

I am working on 3d model of interior and I have two problems. I am trying to made similar model as it is on the first image.

After setting all render properties and turning on sky and illuminations my view on object switch from isometric to perspective view.

Is there any way to change it to isometric view so the point of view do not change position at the time of changing, because I find out the way to return it to isometric but then the point of view that was placed inside of room is moved outside and I can't render object that was inside.

Also I can't set white background as it is on the first image. Second image is my attempt that is made inside of the room.

1.2.jpgexample 2.jpeg

View 9 Replies View Related

AutoCAD 2013 :: Does Support Multiple Lines Of Vertical Setting On Mtext

Jan 15, 2013

I guess it does NOT support it because it seems that it does NOT work properly. For example, in case of multiple lines of “Horizontal” setting, it works properly like followings. But in case of multiple lines of “Vertical” setting, it does NOT work properly like followings.

Configure of “Horizontal”:
ABC
DEF
GHI

Configure of “Vertical”:
ABC DEF GHI

In my perspective, it should go downward like followings.

In my “perspective” of Vertical”:
A
B
C

D
E
F

G
H
I

We are making application software for importing DXF file from AutoCAD. If AutoCAD does not support multiple lines of vertical setting on mtex, our software also should not support it, I think. I want to know the specification for multiple lines of vertical setting of AutoCAD.

View 3 Replies View Related

Photoshop :: Background Transparency

Jun 24, 2008

I often drop many pictures onto a background picture. Before dropping them in I isolate the relevant parts using the background eraser. Then drop the photo in. In all my other versions (I'm using v 6 now) the sections that were erased on the pics were transparent such that the photo they were dropped into showed through.

Now the erased sections of the pics I drop in are not transparent but have a solid color.
Where is the setting?

View 10 Replies View Related

GIMP :: Transparency From Background

Mar 26, 2012

How is it possible, to take the brightness of every pixel from the background, and transfer that to the upper layers transparency. (The upper layer is for example all blue). As I said before, I know that this works. I tried everything out and asked Google a lot of times, but I just can´t figure it out.

What I can remember doing there was just take the blue layer and transfer it to another picture. I was wondering because i didn´t do anything special.

View 9 Replies View Related

AutoCAD Civil 3D :: Can't Turn Transparency Of Raster Images Off When Using Data Connect

Jul 23, 2012

I have a set of four images I am referencing into a drawing through the data connect feature found in Planning and analysis that overlap. I am running Civil 3D 2013. I would like to be able to clip the images as well as turn off the transparency but I can't seem to figure out how. If you select the images cadd thinks it is an image referenced outside of Data connect, but the clipping tool doesn't work, and it doesn't even matter if you de-select print transparency in the page setup, it still prints transparent. Is there another set of commands or tools that I am not aware of that allows you to edit an image brought in through the data connect?

View 2 Replies View Related

Photoshop :: Transparency On A Coloured Background

Sep 7, 2008

I have a red block and on that block I have some lines which I have in white but they need to be transparent as this design is going to be printed on tshirts of different colours and the colour of the tshirt must show through the transparent lines. Im not sure how to make them transparent though, when I convert the white to tranparent you see only the red.

View 6 Replies View Related

Paint.NET :: PNG Transparency - Invisible Background

Jul 25, 2012

I was editing some .png s that are transparent other than the picture itself in the middle, what i would do is edit it and save it and it would keep the transparent/invisible background thing. Now when i save the png it automatically makes the background white, i go through and erase all the white but it is regenerated when i save the png again. i dont think i changed any settings, what do i do?

View 4 Replies View Related

Illustrator :: Transparency Looks Different On White Background

Nov 19, 2012

Why do transparent objects look different on white background vs no background like the image below?

If I flatten the transparency both sides of the gradient object looks like it's on a white background.

If I print it there's no difference.

View 4 Replies View Related

CorelDRAW X3 :: How To Add Multiple Transparency To One Object

May 9, 2008

I am beginner in Draw, and i could not find a way to add more than one transparency

on the same object in corelDRAW X3, it is no problem in corel PHOTO-PAINT.

So how do i do that?

View 14 Replies View Related

AutoCAD Map 3D :: Transparency - Solid Color Shape Files

Jun 18, 2012

I have some shape files that data connected to my drawings and shown as a solid color polygon. I set the foreground transparency 40% in order to see the USGS map on the background. But When I print out, it print out as a solid color, not transparency.

How to work with a solid color shape files so I can see the USGS map when it prints out.

View 3 Replies View Related

GIMP :: 2.8 - Setting Up Multiple Profiles?

May 21, 2012

I use GIMP for a number of purposes, including general image editing, drawing and pixel art.

I'd like to be able to set up profiles for different hotkeys, default windows/window positions/brush settings, etc., but so far as I can find the only way to do this is to either replace/edit the settings files when loading up a different profile or changing its directory settings, neither of which is very convenient, nor am I sure if either is even sufficient.

I'm using Windows XP and GIMP 2.8.

View 3 Replies View Related

AutoCAD Print / Plot :: Pen Setting For Custom Color?

Jan 23, 2012

I receive drawings from a company that uses a custom color of 0,0,255 in their drawings and it plots out blue even on monochrome. How can I make a pen setting so this plots out black?

View 5 Replies View Related

AutoCAD Inventor :: Setting Color Of A Sketched Symbol

Dec 3, 2013

Why does a sketched symbol have a SetColor function even though it doesn't do anything? For example, this is "legal" code, but it won't do anything.

oSymbol.Color.SetColor(255,0,0);
 On the other hand, this is the proper method to set the color of a sketched symbol (I could not find this anywhere in the api)
oSymbol.Color = _mInventorApplication.TransientObjects.CreateColor(255, 0, 0);

View 3 Replies View Related

Photoshop :: Dark Grey Background Instead Of Transparency

May 7, 2012

Windows, PS CS4. I'm trying to erase part of an image such that there is nothing there. However, when I erase the part of the background layer (I have no layers below it, and none above occupying the same space), I do not see the chequered transparency pattern, but dark grey. This grey also remains part of the image as if it were a colour rather than being transparent. To be specific, it is the white between the borders of a comic I am trying to erase..

View 8 Replies View Related

Photoshop :: Intermittent Flashes Of Transparency In Background?

Dec 11, 2012

I notice the tranparent background flashing intermittently when I zoom or use any of the functions like layers, levels etc.    I am using a new Win 8 system and have updated both photoshop CS6 and my video card drivers. 

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved