AutoCAD Map 3D :: Parcel And Building Number - Create Topology / Thematic Query
Dec 5, 2011
I have some problems with this drawing. I have some parcels and buildings, and a number for each of them. I attached data to parcel and building number, and I want to create topology and then to create thematic queries, based on any data attached to the numbers. And I don't know how to do that, and how can I use thematic query to show me the specific parcels based on the data I want if the table is attached to the parcel number and not on polylines. Same thing on buildings...
For example: I want to make some thematic maps based on tax value, street where the parcel is located, area, or on buildings: how many levels they have, and more.
I uploaded a example file to be more specific, with data attached to numbers, without topology created (drawing cleanup is done).
View 2 Replies
ADVERTISEMENT
Oct 17, 2013
How to sort curve table data by parcel and then curve length? Out here in Oregon, one of the standard ways of defining a curve table is to show the length of curve and have each curve in the parcel grouped together.
I have not figured out a way to do this in C3D. At one point, Sinc had started working on the issue for us, but I don't think he ever got anywhere with it (or at least it didn't get into his add on.
View 1 Replies
View Related
Oct 23, 2012
I am trying to Apply Location query on Query to Filter Data in .NET. Any sample code or procedure to program.
View 6 Replies
View Related
Aug 26, 2013
I have a record plat drawing with multiple parcels and parcel styles. For my lands of the grantors I view port froze the lots and right of way layers from my parcel styles. I don’t want to show them in this viewport. To my surprise the lines show up in the object layer we have set for parcels. This was not the case in 2011. We are in 2014 with the first hotfix update. I understand putting the parcel styles in the object layer, but why another mysterious line under it? I did create parcels from objects, but had them erased when I created them. This did not matter either way. Is there a way to get rid of them? I did put them in a new layer, set it to “No Plot” This kept them from plotting, but I really don’t want to have to take the time to do it.
View 6 Replies
View Related
Sep 18, 2013
I have 4 points (from "Points from file", I created Points #1, #2, #3 and #$ in the non-linear fashion).
1) I want to create 4 straight lines (connecting Pt#1-Pt#2, P#2-P#3, P#3-Pt#4, P#4-P#1) by using some Commands. What Commands in the Command Line should I use to create these 4 straight lines from these 4 points?
2) I want to create 1 parcel (connecting Pt#1-Pt#2-Pt#3-Pt#4-Pt#1) by using some Commands after "Parcel Creation Tools" => Draw Tangent-Tangent with No Curve is clicked. What Commands should I use in the Command Line to specify these points to form a parcel?
View 9 Replies
View Related
Apr 25, 2013
To workaround the missing API for creating Parcel Area Tables, I have tried the following:
1. Create a "pick point" selection set (using ObjectARX), containing the Parcel for which I want to create a table.
2. Execute the AddParcelTable command.
3. Programmatically push the Select Parcel-button and the OK button of the Create Table dialog using win32 API.
When the Select Parcel button is pressed, the label next to it displays 1 parcel(s) selected and when the OK button is pressed, Civil prompts the user to pick the upper left corner of the table, but the prompt is immediately interrupted with the message "Invalid 2D point" and the table creation is aborted...
View 3 Replies
View Related
Oct 17, 2012
When creating and labelling a parcel Autocadd Civil 3d places a label in an adjoining area outside of the intended parcel.
The label seems ubrelated to the intended parcel and is labelled with a diferent parcel number, area, etc.. No additional parcel boundaries seem to be created.
Have created a closed polyline for parcel creation as well as a number of other steps to ensure that there are no breaks in the enclosed parcel.
View 4 Replies
View Related
Jan 13, 2014
I have been sent a client's construction drawing for a care home where i need to design the sprinkler installation. The majority of the rooms have got the same head positions within them, but they have all got a slightly different angle as the building is shaped like a banana. Unfortunately its not a uniform radius that i can tell as the one side is larger than the other.
So my question is this. Normally, on a square building, I drop in construction lines along the bedrooms so that i know my sprinkler heads are all the same distance off a wall, and I only need to line up one side. However, with this building being a curve, and the wall angle being slightly different on each room, how do I place an angled construction line or polyline to act as my set out line for my heads.
View 9 Replies
View Related
Dec 20, 2012
I am trying to make an thematic map and i want to enter at the value an interval. For example i want to dysplay all constructions that were made between 1980 and 2012 and i dont know what to write at the Value. I've tried to enter (1980,2012) but is not good
View 2 Replies
View Related
Jan 8, 2013
Is it possible to do Thematic based on attribution display for a layer.
For eg: I have a layer called CIty with object data for name, country, etc. I would like to display a common symbol for all city points in ASIA, a different symbol or color for others etc. how can it be done with autocad.
View 5 Replies
View Related
Feb 10, 2012
I been trying to make a deployment of Autodesk Building Design Suite Premiun 2012 from
a pc with XP 32 Bit, XP 64 Bit, and Windows 7 64 Bit and the aplicaciton stars well but then after a couple minutes. I got this error.
Cannot create deployment - "The copy functions cannot be used D:x86RAC2012
View 2 Replies
View Related
Nov 9, 2011
I set the thematic rules for a connected data (example .shp file) in the style editor, can I use this thematic rules automatic for other connected data? This other connected data (other, slightly modified .shp file) have same values as the first.
(I think this so, as in arcview the .avl file, or in arcmap the .lyr file)
Can I export, and than import the thematic rules?
View 2 Replies
View Related
Nov 29, 2013
Setting the label size for multiple thematic rules, I couldn’t figure out how the label size can be set for multiple thematic rules in one go (attached).
View 1 Replies
View Related
Feb 25, 2012
i want to know if there is a way possible to write text in damaged building effect.
i dont have any pictures but i can explain for example if we write E, the top bar is damaged from the end and the middle one has broken windows or something like that
is this effect at all possible,
View 9 Replies
View Related
Dec 22, 2007
In this part of tutorial series on modeling "Architectural Multistorey Building" the author is going to show you how to create the ground floor of the multistorey building using AutoCAD floor plan and elevation as the background reference image. Follow the step by step instructions for more details:
Architectural Multistorey Building Tutorial – Part one – Ground Floor
View 9 Replies
View Related
Mar 7, 2011
I am trying to detect overlaps between two different features. They are, at the core, shape files from a GIS system and we have AutoCAD Civil 3D 2009.
I have reviewed the steps to test for Topo within a feature but don't know how to test topo between two features. I need to test for and identify "Overlaps" between feature A and Feature B and when Feature A is "Not Entirely Within" Feature B.
View 7 Replies
View Related
Aug 28, 2012
Why I can't create a topology for spatial object (feature classes)? It works only for drawing objects.
View 6 Replies
View Related
Dec 22, 2011
I have two set of points with O.D. attached (points_1:data_1 and points_2:data_2). I want each point of the first set get the O.D. of the NEAREST point of the second set. Something like "point overlay". The problem is that AutoCAD Map can't overlay point topologies, and that makes sense, since entities don' t actually overlap.
View 6 Replies
View Related
Jul 20, 2011
I have successfully created and defined a topolgy in Map 3D using a Visual Lisp routine that I cobbled together from CREATE.LSP. What I'd really like to do is be able to access that data and create closed polylines and centroids without going through the menu interface. The only documentation that I've been able to find is the Mapping Commands section of the Help file.
I found several commands, but they rely on user input to work. I might be able to work around this by typing a dash before the command line to suppress dialog boxes except for the fact that MAPCLPLINE does not respond to this method.
I noticed in CREATE.LSP that there was a TPM_MTNBUILD command that (apparently) was used to build the topology. Are there similar commands that I just haven't found yet?
View 2 Replies
View Related
Dec 6, 2013
Lets say, I have an Extrude feature built on a Rectangle as Sketch Profile. Is it possible to programmatically edit that Sketch, add one line in the middle dividing the Rectangle and replay the Extrude, so that I get Rectangular solid and a Partition surface in between?
This was not possible as a user, but programmatically if its allowed to turn ON some Non-Manifold flag and allow this. If allowed, this probably may not be a single Extrude feature doing both Solid and Surface, but could split into 2 Extrudes.
View 4 Replies
View Related
Jan 21, 2011
Auto cad map 2011...unhanded exception error occurs when I create a large (2500+) polygon topology. In fact, initially I only use acad point for centroids to minimize complexity, until I know the map is clean.. Later, when a topology is assured, I bring in attributes as the centroids. I am only using four layers. Have been doing this for five years...always used acad map 2006 and had no issues. Have had the same problem with all releases after 2008, and was hoping this would be the moment..but it's still the same. Incidentally...I even moved to a 64 bit box,6 gigs of ram and 64 bit 2011version of acad map in the hope that this would go away.. How I regret giving up version 2006.
View 2 Replies
View Related
Aug 8, 2013
The attached assembly contains 3 parts modelled in slightly different ways. All parts fail when the dimension of 600 is changed to 200 in the Tool Part, probably because a different face comes into play...but it's the same body.
View 4 Replies
View Related
Dec 6, 2011
I would like to link a cell value in excel with the partnumber from a assembly in Inventor. How can I made this link?
View 1 Replies
View Related
Sep 6, 2013
i need to Create aligned CS line with increasing Chainage Number and Name through a center line (yellow line). The CS lines are 25 meter apart, it can be done by ME command, but can not automatically increase the Chainage number and CS number.
the CS number (CS-1200) is increasing by 1, like CS-1200, CS-1201, CS-1202, ....also The chainage number (CH Km 29+975) is increased by 25, Example: CH Km 29+975 , CH Km 30+000, CH Km 30+025, CH Km 30+050....
i would like to do it automatically, otherwise i have to keep editing for a long time,
View 0 Replies
View Related
Nov 18, 2013
I have downloaded the SSURGO file from Web Soil Survey. They are in .shp files, I have imported the spatial files into AutoCad Map 3d 2012. My goal is to create a Topology so that I can detemine the soil type and acres of parcels of land.
When I click on the polygon in my drawing it is a closed polygon with double line or overlapping lines and it does has object data but it is part of the line not a point as I am used to.
View 1 Replies
View Related
May 27, 2013
I'm working with Autocad 2011. My objective is to create a dynamic block made up of a circle with a letter or number inside. Here's the tricky part. As I add additional letters or numbers the circle increases in diameter automatically to fully encircle whatever it is I type. The more letters or numbers the larger the circle and the fewer the letters or numbers the smaller the circle?
Or is there a lisp routine for this type of request?
View 5 Replies
View Related
Sep 14, 2012
Although I use Civil 3d 2013, I have never used the map 3d program. I have GIS data and need to perform queries but I can't seem to figure out how to get a query to work.
I have the drawing open and the data is displayed. On the Task Pane I right click on "Current Query" and choose "Define". On the "Define Query of Attached drawing" dialog under "Query Type" I want pick "Data" which opens the "Data Condition" dialog. At this point you can choose Object Class, Object Properties, Database Link, Object Data or attribute. When I pick any of these options I get a "No Tables Found" message at the bottom of the dialog box (with the exception of Attribute). I'm therefore left with nothing to pick for the Object Data Fields.
View 3 Replies
View Related
Jun 29, 2013
I have sculpted several levels of detail on a face and have run into a issue.I have realized that I want to change the topology of the face.How do I go about doing this without losing all of the sculpted detail?
View 1 Replies
View Related
May 13, 2010
I've set up my machine months ago to connect to SDE 9.2 from Civil 3D 2009 and it's worked all along. Recently, however, it stopped working. I can connect and view all the layers the same as before, but when I select a checkbox beside a layer to query and hit either "Add to map" or "Add to map with query", the button greys out and nothing happens. This has worked on this machine for months (even with 2008), but now it stopped. As far as I can tell, nothing has changed with SDE either. Is there a log anywhere I can view for errors?
View 1 Replies
View Related
Mar 31, 2010
I have a county wide aerial image in jp2 format, connected through Data Connect and every time I pan or zoom it says "executing query". It is very slow getting around in the drawing (tracing over tree line, roads, etc.). I have a Windows 7 64-bit machine with 6 GB of RAM. Is there a setting I can turn off to make zooming, panning, changing layouts, etc. faster?
View 3 Replies
View Related
May 28, 2013
I downloaded a shape file from URL....that contains all of the streets in a vicinity. All of the linework has object data attached that contains street names. I have hundreds of streets shown, but i only want to show the name of a few of the streets. right now i am coping the name out of the properties and pasting it into a mtext. I know how to query the drawing and attach the name to all of the streets, but it creates way to many to delete.
How i can just pick the streets i would like to label and label just those street?
View 3 Replies
View Related
