I have a county wide aerial image in jp2 format, connected through Data Connect and every time I pan or zoom it says "executing query". It is very slow getting around in the drawing (tracing over tree line, roads, etc.). I have a Windows 7 64-bit machine with 6 GB of RAM. Is there a setting I can turn off to make zooming, panning, changing layouts, etc. faster?
View 3 Replieswhen i work on geometry which is not in orthographic orientation i always prefer to create orthographic view of this, that's what i do :
Command : ucs
Command : z
Command : (selecting representative angled 2 points)
Command : plan
Command : c
than the whole zoom is lost , and i need to find again the portion , and save a view. i want to automate this process but before i automate it i want to know if there is a way to avoid zoom lost after executing the (plan) command?
I am trying to Apply Location query on Query to Filter Data in .NET. Any sample code or procedure to program.
View 6 Replies View RelatedI have a problem while executing intersectwith between polylines and lines
the polyline execute intersectwith method referencing a line object with expandboth parameter value but sometimes , the intersection is not found
when using expandthis or expandargument values, I have no problems
I'am using VS2012 express and Autocad 2014
the attached project containt :
an image (result;png) showing my result
a dwg file (dessin3.dwg) , it is my test file
the source code for testing , (test" command)
it find all polylines and all lines in the drawing , compute the intersections between each couple and draw a dbpoint on each
I am occasionally developing with ObjectARX 2013. The problem: A command being executed from a document needs to focus on another document. I am doing that as:
Application.DocumentManager.MdiActiveDocument = aGeneratedDrawing;
After this line, the focus is taken by the other document. But the command execution just stops without producing any visible error or catchable exception. Apparently, the document focus cannot be changed during execution of a command.
A solution: What worked in the end was displaying a .NET form inside the command, like:
Autodesk.AutoCAD.ApplicationServices.Application.ShowModelessDialog(aForm);
Then, performing the very same set of actions on a button click works flawlessly.
The question is: can using the form as a mediator be avoided? It is redundant there. I tried hooking to CommandEnded, executing the code as a separate command via Application.DocumentManager.MdiActiveDocument.SendStringToExecute, and also executing the code in a separate delayed thread. So far, only triggering the code via the form worked.
I have a macro that automatically creates a Detailed view on a sheet. It works on 2 input's:
- mouse click 1 (set's the target to be detailed)
- mouse click 2 (set's the location where the balloon should be)
The code works fine. But sometimes the user will start another command, or restart the same command, while it is still running. This off course gives all kinds of problems.
Is there a possibility in VBA to prevent the user to start another command while this command is running?Or is this problem a part of the clicking itself?
Here is my (it uses a Class Module called: clsGetPoint, see code below)
Sub AutoDetailedView() On Error GoTo ErrorManagment '(error handling 2013/02/18) 'step 0 Create a transaction. -> for 1 undo command Dim oTransMgr As TransactionManager Set oTransMgr = ThisApplication.TransactionManager Dim oTrans As Transaction Set oTrans = oTransMgr.StartTransaction(ThisApplication.ActiveDocument, "AutoDetailedView") 'step 1 Select a drawingView 'Set a reference to the drawing document. Dim oDrawDoc As DrawingDocument Set oDrawDoc = ThisApplication.ActiveDocument 'Set a reference to the active sheet.
[code].....
Inventor 2014 crashes when executing revision table edit. This started after installing windows 7 SP1(x64) and SQL server 2012 express (x64).
View 1 Replies View RelatedSurfaceBody.GetExistingFacets( ToleranceIndex As Double, VertexCount As Long, FacetCount As Long, VertexCoordinates() As Double, NormalVectors() As Double, VertexIndices() As Long )
This works fine in VBA (Inventor 2014). But when I start using the same in VB.NET (VS 2012) all declaration as long shows as integer and fails on compiling. If I change to integer compile passes but fail on executing in Inventor 2014.
Im having a little trouble of late understanding how to undertake an action/ command if nil
what i do know id the following:
(setq TESTvar(findfile "acad.lsp"))(alert TESTvar)
this gives me the path of the acad.lsp, that is provided it actually exists, however because the acad.lsp is not compulsory it may indeed not exist meaning that the command prompt would return the NIL value instead of the pathname.
based upon that I would like to create a new acad.lsp file if not found by autocad.
I have a template that I have created, in it I have a rule that changes the stock number and description based on which sheet metal rule is selected. The weird thing is it works correctly if the first sketch is a rectangle. If you sketch a circular shape and make that the face it will not work. It blanks out the values for the stock number and description.
I'm running Inventor 2014 update 2.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 33212 StartFragment: 314 EndFragment: 33180 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimiPropValAsString=""
DimiPropDesAsString=""
SelectCaseSheetMetal.GetActiveStyle()
[code]...
The AutoCAD doesn’t show the “intersect osnap” at certain zoom!
The “intersection osnap” between a “hatched rectangle” and a “DASHDOT2” line appears and disappears depending on the amount of zoom!
As I zoom out the “intersection osnap” appears but when I zoom in, it disappears
Why the "intersection Osnap" should disappear as I zoom in?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedMy keyboard has a zoom key with + and - selections. I use to use this key in drawings to zoom in and out when in the AutoCAD application when we had Windows XP. Now that I have Windows 7 I can't do this. I can't find out how to assign this key on the Microsoft Keyboard interactive software either. I have the other keys assigned as desired.
Can I still use my keyboard zoom key to zoom in and out in drawings? If so, how do I set this up in AutoCAD, or do I need to do this through a Microsoft keyboard application?
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies View RelatedAlthough I use Civil 3d 2013, I have never used the map 3d program. I have GIS data and need to perform queries but I can't seem to figure out how to get a query to work.
I have the drawing open and the data is displayed. On the Task Pane I right click on "Current Query" and choose "Define". On the "Define Query of Attached drawing" dialog under "Query Type" I want pick "Data" which opens the "Data Condition" dialog. At this point you can choose Object Class, Object Properties, Database Link, Object Data or attribute. When I pick any of these options I get a "No Tables Found" message at the bottom of the dialog box (with the exception of Attribute). I'm therefore left with nothing to pick for the Object Data Fields.
PS not letting me edit some random commands before executing them, including Duplicate, Fill, Print Preview, Stroke...possibly others I haven't discovered. When I click the dropdown choice, an edit window used to let me tailor pixel widths, color, etc. (I know, [it's what] 'edit' means). Now, the little eyedropper icon replaces my cursor, all top menus are grey except 'View' and 'Window', I get that awful 'doont!' sound, and my only option is to just hit 'Enter' and it executes the command with whatever preferences I last set before this problem, usually of no present use to me. I have relaunched PS, restarted the computer with no other tasks and relaunched, and impotently shaken my fist at the screen to no avail.
View 1 Replies View RelatedI've set up my machine months ago to connect to SDE 9.2 from Civil 3D 2009 and it's worked all along. Recently, however, it stopped working. I can connect and view all the layers the same as before, but when I select a checkbox beside a layer to query and hit either "Add to map" or "Add to map with query", the button greys out and nothing happens. This has worked on this machine for months (even with 2008), but now it stopped. As far as I can tell, nothing has changed with SDE either. Is there a log anywhere I can view for errors?
View 1 Replies View RelatedI downloaded a shape file from URL....that contains all of the streets in a vicinity. All of the linework has object data attached that contains street names. I have hundreds of streets shown, but i only want to show the name of a few of the streets. right now i am coping the name out of the properties and pasting it into a mtext. I know how to query the drawing and attach the name to all of the streets, but it creates way to many to delete.
How i can just pick the streets i would like to label and label just those street?
I have a drawing with 2 Data Connections: 1. Census Block SHP file from the Census Bureau and 2. an SDF file I created from GPS point locations. The question: Is there a way I can query the relationship between these 2 layers and have it report which census block each point is in?
View 9 Replies View RelatedLT 2013. Under Layer Ctrl, the status tab (light blue sheet of paper icon), highlights as light blue (in use), regardless of whether or not its in use. The only way I can force a refresh is deleting / attempting to delete a layer (eg. del '0' which obviously dosen't work); but forces an update, where those in use remain light blue, and those not in use revert to white/grey.
how I can fix this quirk of not updating/refreshing when the Layer Ctrl is opened.
I've a Photoshop droplet with set of actions like:
Open
Fit image
height:180
width:180
Save
as jpeg
quality:11
Close
It does it's work as expected but once the actions are executed on all the images in a folder, I'd like to close the Photoshop as well, which looks tricky in Photoshop droplet. Is there anyway to close Photoshop application at last by action? Or is there any option so that droplet actions will be executed without opening the Photoshop window.
Execute a picture from Lightroom to Photoshop das not work. Picture is not opened in Photoshop.
View 1 Replies View RelatedHow can I query autocad map data in preview mode,and store these objects in a collection by using C#.
(I want to use simple query like all lwpolyline having layer = "test" and color = 3). If I run this query in draw mode multiple times what will happen? (means possibilty of duplicate objects??)
I'm using the GENIO import tool and have run into a problem - the data is imported but due to the way the data is used in MX there are a multitude of crossing 3D polylines (see screenshot).
The strings are all "L" strings which are typically used in MX to define open areas where spot levels are surveyed (would be points in C3D).
The only way I can see to get around this is to create Civil Points at each vertex and use these in the surface build - any better solution (apart from requesting a triangular DTM of the MX surface)?
how to design a group in a query condition in AutoCAD 2011 MAp 3D I have
Property: LAYER = CP*
AND (Data: CIRCUIT.CIRCUIT = BRN22
OR Data: CIRCUIT.CIRCUIT = BRN21)
I woudl like to get this into vb.net?
also, in vb.net when creating a new data condition....do I need to use datacondition.Table and Datacondition.Column? Im unsure what these mean?
I have brought in a raster ASC file (X,Y,Z) and am only interested in the red area (ultimately I want to create 1m contours layer) but cannot find a way to query the data to only show the red area.
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
Is there any chance do query with excluding some data.
For example, I have 20m contours and I'd like to separate them to major and minor one.
I can extract major but not minor contours because there is no not equal query operator.
1. How to make the STYLE and Standard Editor "NOT" Read Only. As a user, I do have the Administrator permission.
2. I have created a Style but then I do not want it anymore. How? Can I delete it.
Is there anyway for me to check the filtering applied to a parts list (on the drawing) via the API? I looked but couldn't see where to access this information - am I just overlooking where it is stored on the object?
View 2 Replies View RelatedIs there any subassembly can get variable slopes depend on depth like in Land desktop as you can see in the attached file.
View 2 Replies View RelatedI want to attach a drawing (say A.dwg) and want to query some objects from it and want to draw in the current drawing. In addition to that I also want to set the coordinate system of current drawing ,same as attached drawing(A.dwg). How can I do it by using C#(Arx).
View 1 Replies View Related