AutoCad :: Create Aligned CS Line With Increasing Chainage Number And Name
Sep 6, 2013
i need to Create aligned CS line with increasing Chainage Number and Name through a center line (yellow line). The CS lines are 25 meter apart, it can be done by ME command, but can not automatically increase the Chainage number and CS number.
the CS number (CS-1200) is increasing by 1, like CS-1200, CS-1201, CS-1202, ....also The chainage number (CH Km 29+975) is increased by 25, Example: CH Km 29+975 , CH Km 30+000, CH Km 30+025, CH Km 30+050....
i would like to do it automatically, otherwise i have to keep editing for a long time,
View 0 Replies
ADVERTISEMENT
Mar 18, 2011
Any lisp programme for creating a line profile and chainage. I have attached a sample drawing. The blocks on the line have elevation and lines are drawn from the datum .If i manually draw it will take too much time.
View 9 Replies
View Related
Feb 27, 2012
I am doing a virtual tour of a design show. Currently Material editor has 24 slots for materials. Is there any way of increasing the amount of material slots as i think I may run out.
Solidworks 2009-11, Max 10 / 11
Windows 7
Quadro 4000 2 gb
i7 2600k 3.4 Ghz, 16Gb Ram, Dx 11
View 2 Replies
View Related
Apr 14, 2013
Is there a way to increase the number of documents shown in the Windows menu? Sometimes I work with more than 9 docs and it's a pain navigating to and from "More..."
View 3 Replies
View Related
May 17, 2011
I am using CorelDRAW X4.
I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.
I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.
View 3 Replies
View Related
Dec 15, 2013
I don't undrstand why my assembly line increased after the existing surface in cut and fill condition, it should be stop at the existing surface. due to this problem my cut and fill quantities is not coming accurate. I'm attaching the screens shot of section. I'm using civil 3d 2009 32 bit software.
View 4 Replies
View Related
Nov 4, 2011
I'm having a bit of trouble using a curtain wall BIM model that I downloaded from a manufacturer's web site.
It seems like the vertical mullions are not centered on the grid lines; one side of the mullion is 1 3/16" from the grid line while the other is 1 13/16" away. If you look at the mullion in plan, you'll see the same issue. If you look at the profile rfa file, it appears that the centerline is properly located and locked, it's just in the project file where it's off.
If I select the mullion in the browser the right-click, Make Element Editable is grayed out.
If I select the mullion in the drawing area, un-pin it and then right-click, Edit Family is grayed out.
If i select the mullion in the drawing area then click Edit Type, the Type Properties dialog box shows the two parameters in the Dimensions group, "Width on side 2" and "Width on side 1", that are uneven by the same amount that the mullion is off of the grid line. I suspect that this the issue, but these are both grayed out and I can't locate their origin. If I duplicate the mullion, those parameters are still grayed out.I can save the profile, but not the mullion, which is showing the issue and contains the parameters that I want to change. How I can select and edit the mullion?
View 2 Replies
View Related
Aug 17, 2013
Is it possible to create Arc Aligned Text in Revit? as in Autocad
View 2 Replies
View Related
Jun 14, 2013
I increased my document from 8.5"x11" to 22"x34" and a black line of the original document remains. It is not selectable - the word "x page" appears when my cursor hovers on it. I'm working in C6.
View 4 Replies
View Related
Sep 7, 2013
How do i make my chainages show as 420.000 rather than 4+20.00.I.e I need to take the plus sign out (we never use them - only whole distances) and I need it in 3 decimal places.
View 3 Replies
View Related
Oct 26, 2013
I'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
View 1 Replies
View Related
May 21, 2013
Is there a way to change the format of alignment chainage from 1501+120 to this format 1501km120?
View 3 Replies
View Related
Apr 3, 2012
Is it possible to generate alignment chainages at irregular (not-constant) intervals?
View 2 Replies
View Related
Apr 11, 2013
I've drawn a profile and would like to show the elevations of each surface selected in different bands. I've set up the bands easily enough though when they display on the section I've got two levels either side of the chainage line one with 0.01 precision and one with 0.001 precision - I only want to display one. I've tried fiddling with the Profile View Properties but don't seem to be getting very far..
View 3 Replies
View Related
Nov 2, 2011
Is there a way to dimension in AutoCAD LT?
For example: I draw a line and when I dimension it, it comes up as 9.32, but I want that line to be 5.1. Is there a way to dimension this line? Is there code that I should be familiar with? I need the line to be exact dimensions, not just change the number.
View 8 Replies
View Related
Nov 18, 2013
I need cross section information of a creek for a Hydrology program (DRAINS in Australia) and need to extract this from a surface I have created in Civil 3D. I require the Chainage and Level for a profile which represents the creek cross section at several specific locations. The information is essentially the data bands in a Profile which I can create, however I cannot see how to obtain this information in a form I can use.
the format of the data can be copy and pasted into Excel from which I can directly import the information into the software.
View 2 Replies
View Related
Jul 18, 2012
I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies
View Related
Sep 12, 2013
For example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies
View Related
Aug 24, 2012
I have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies
View Related
Oct 24, 2012
I need to have symbolized linestyles on a number of 3D polylines in mapping data.We normally would simply explode the 3D poly's, and our linestyles display fine.
The linestyles also display fine if we change the 3D polylines to polylines.HOWEVER, with the current dataset we have very high point density on our 3D polylines, and we need to preserve the elevation attributes of the lines.
If we explode the lines we end up with so many tiny segments that they will not display the linestyles - changing the linetype scale eventually will show the style, but at far too small a size to be relevant.
We also, in most of the layers, are not able to change the 3D polylines to polylines - we must preserve the 3D attributes of the lines.So the problem is that we can't explode the 3D polylines, and we can't flatten them either, but we want the linestyles to display.We are using Map3D primarily, but can access C3D if a solution is available there.
The precise scenario is for instance a line which is a top of embankment, but which has points at around 30cm intervals, over a line length of 206m. This particular dataset has several hundred lines like this, and the linestyle we are trying to display is a simple set of repeating ticks off one side of the line.
We are experimenting with weeding the points, but the shape of the lines is being considerably downgraded by this process.at this point we are most likely going to have to present this data without linestyles for these features - not our first choice.
View 1 Replies
View Related
Sep 5, 2011
How do we do a break and or jog line in a section so we make things shorter? I did find the DIMJOGLINE command and that will be great for the dimensions but what about the other stuff, do we have to do that with a block or draw the thing, if that's the case what are you doing to handle this?
View 5 Replies
View Related
Dec 6, 2011
I would like to link a cell value in excel with the partnumber from a assembly in Inventor. How can I made this link?
View 1 Replies
View Related
Dec 5, 2011
I have some problems with this drawing. I have some parcels and buildings, and a number for each of them. I attached data to parcel and building number, and I want to create topology and then to create thematic queries, based on any data attached to the numbers. And I don't know how to do that, and how can I use thematic query to show me the specific parcels based on the data I want if the table is attached to the parcel number and not on polylines. Same thing on buildings...
For example: I want to make some thematic maps based on tax value, street where the parcel is located, area, or on buildings: how many levels they have, and more.
I uploaded a example file to be more specific, with data attached to numbers, without topology created (drawing cleanup is done).
View 2 Replies
View Related
May 27, 2013
I'm working with Autocad 2011. My objective is to create a dynamic block made up of a circle with a letter or number inside. Here's the tricky part. As I add additional letters or numbers the circle increases in diameter automatically to fully encircle whatever it is I type. The more letters or numbers the larger the circle and the fewer the letters or numbers the smaller the circle?
Or is there a lisp routine for this type of request?
View 5 Replies
View Related
Nov 19, 2013
why won't my line spacing change even after I change the # in the leading pane
View 3 Replies
View Related
Feb 28, 2013
I would like to learn how to create a print design for college hoodies. I get asked all the time but it takes me a very long time to do it. I am sure there is a quicker way in illustrator.
I want to create a design like this image. I am using Illustrator CS 5.1 right now.
View 4 Replies
View Related
Mar 28, 2012
How to “synchronize” the ‘layout number” with “sheet number”?
As in most cases, the arrangements of “lay outs” reflects the way they are regularly printed, then how could we renumbering the sheets such that the first lay out takes number 1, the second lay out takes number 2,…and so forth.
For example, in the screenshot below, the
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 2 Replies
View Related
May 14, 2012
How can I change the way the Project Browser maps the creation of new projects?
Currently, the new project folder is created and named according to the Project Name prompt. We want the folder to be named according to the Project Number prompt...
View 3 Replies
View Related
Dec 6, 2013
I created a number of models/scenes and applied materials/textures to them using bitmaps that are in another folder.
I then created sub-folders for each of the models/scenes because I wanted to export to .obj and then copied the .max files to those folders. I then opened those .max files and the materials/textures were showing as normal.
I then exported to .obj, so in each sub-folder I then had 1 x .max, 1x .obj & 1 x .mtl files. Problem is that if I now open the original .max files in the normal way, the materials/textures are not showing and a message comes up saying that the bitmap files are missing. I don't understand why this is, seeing as the .mtl files are there in the sub-folders along with the .max & .obj files.
View 4 Replies
View Related
Jul 23, 2013
I create a contour layer from a DEM raster and everytime it comes out about 700' offset from the DEM.
View 8 Replies
View Related
Dec 17, 2011
How do I increase the size of blocks I get online?
View 2 Replies
View Related
