How do we do a break and or jog line in a section so we make things shorter? I did find the DIMJOGLINE command and that will be great for the dimensions but what about the other stuff, do we have to do that with a block or draw the thing, if that's the case what are you doing to handle this?
View 5 RepliesIs there a way to break the Callout Boundary similar to the Section Line in Revit Arch 2011 ?
View 9 Replies View RelatedI needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
I draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
how to break diameter line into horizontal line at the end ?... there's no such option in editor style (I want to have 2 arrows for this diameter, not one as it is in editor options)
View 2 Replies View RelatedI am trying to do a drawing but there's a function I forget. I want to start a line from a section of another line. How to do something to skip a distance from a start point of a line to the position you want.
View 5 Replies View RelatedI'm trying to make a rainbow.
I'm using the line tool but when I drag to create a line the line appears but then when i click to create another line it disappears.
I'm trying to write a lisp routine to create a two line MLEADER but i can only get one line of text. Creating the MLEADER manually from the command line i just have to hit enter after the first line of text to add a second line. How would i do this in a lisp routine?
View 2 Replies View RelatedFor example, I'm making revisions to a plan and drag a block or xref of the floor plan changes where walls/doors/windows have moved. I want to be able to simply pick the underlying linework as opposed to tracing over each line of said xref/block.
View 8 Replies View RelatedI have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
View 2 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedI have to break a line/polyline with a known distance around a point of the line. I was thinking of creating a circle with a specific radius and then trim the line inside the circle, then delete the circle but I could not find how to use trim in .net.
View 1 Replies View RelatedHow can I break a line without leaving a gap?
View 4 Replies View RelatedIn Regis you copuld use the "clean"command to break each line at an intersection. What command or function must I use in AutoCad 2013? I wish to break the lines at each intersection in order to import the lines into a GIS application. I am currently drawing in 2D.
View 4 Replies View RelatedIs there a command to break a line or dimension, to show that not all of the line is displayed or where the length is not important or undefined?
View 4 Replies View RelatedWould like to know if Autocad has any thing that i could use to break multiple line at one time with out going to each line and using the break command. Using Autocad 13.
View 3 Replies View RelatedIs there a way to set up autocad(2004) so that when I insert a block, the block then automatically breaks the line I am inserting it on. My drawing's are mostly electrical schematics so the line I am refering to is the circuit and my blocks are components. At the moment I insert my block and I have to use the command 'break'. I know this does not take up a lot of time but I am always looking for ways to speed up!
View 8 Replies View RelatedI would like to ask a question on “Break at point”.
It is possible to break a line but for circles and ellipses, my attempts resulted in no break at all (see attached picture).
Does “Break at point” support circles and ellipses? If you have a circle and you would like to make it a ¾ circle arc, or any arbitrary angle, how do you do that?
brk.png
How do you add a break line for stairs? In windows it is under 'express tools' but I can't find it in the mac version.
View 1 Replies View RelatedI often use feature lines for parking lots and ponds. They're great when they work, but they drive me NUTS when they don't - which is a lot of the time. For parking lots and ponds, my feature lines usually close back on themselves. That's when I have trouble breaking the feature line. When I use BREAKFEATURE, I choose two points and this should, in theory, leave a gap in the feature line between those two points. That's not what happens. I end up with a huge gap between the first point I picked and a vertex point 5 or 6 vertices away. It doesn't matter where I pick the breaking points.
I've also tried TRIMFEATURES. I draw lines across the feature line where I would have chosen the breaking points. But the portion that I want to remove is the portion that always remains. It doesn't matter where I select the feature line to be trimmed (inside or outside of the cutting edges).
I think there may something wrong with the feature line itself. Sometimes, if I erase the original and draw a new one, it will trim just fine. But that's such a headache, and it doesn't always work. If I knew what was causing the feature lines to go squirrely, I would aviod it. Unfortunately, it seems like breathing the wrong way can screw up a feature line.
How can I use one "line break" in the same command on iLogic ?
For a simple doubt, a simple sample :
MessageBox.Show("Message blabla blablablabla blablablabla", "Title")
In this case, how could i divide the message in 3 lines in the messagebox ?
actually this would work for me in other case too, creating a text with more than one line, instead of creat many text boxes.
IV 2013
Want to break/cut a line which is in reference file.
I know MicroStation has this function called "mask". Does AutoCAD has similar?
I want to break a line into thirds or fourths.
View 5 Replies View Relatedhow to break a line or polyline down to equal segments.
View 4 Replies View RelatedWhat controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedIs there a way to have a multiline point description? For example, in the raw description, i wrote out the text, but I would like to return a line for the parentheses.
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
How to put a (Return) or Break to another text line in a label? Usually it is one big long label on one line.
View 4 Replies View RelatedWhen adding break lines to a surface, a dialog box like appears that asks for weeding factors and supplementing factors. What I would like to know is, how can I change the defaults to reflect the settings needed on my project.
I am using C3D 2009.
Is it possible to break multiple lines at a single point without a gap along a perpendicular line??
View 6 Replies View Related