AutoCAD Civil 3D :: How To Put Return / Break To Another Text Line In A Label
Feb 27, 2013How to put a (Return) or Break to another text line in a label? Usually it is one big long label on one line.
View 4 Replies
ADVERTISEMENT
AutoCAD Map 3D :: Line Break In Text Label Doesn't Center 2nd Line Like It Does First
Feb 22, 2012I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
AutoCAD Civil 3D :: Curb Return Grade Label
Mar 12, 2013How I could create a label for the curb return grade as shown on the attached file. The label is on a curve.
View 6 Replies View RelatedAutoCAD Civil 3D :: Dragged State Label Style Of Line Between Text Not Flipping?
Mar 27, 2012I'm having trouble getting my label style to flip when in dragged state. If I drag it off to the right, the text and line show up just fine, but if I drag to the left, the TC and FS head that way, but the line in between stays put.
View 8 Replies View RelatedAutoCAD Civil 3D :: Remove Feature Line Used As Break Line When Creating Surface
Dec 11, 2012I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
AutoCAD Civil 3D :: Changing Profile Line Label Style Causes Label String To Revert To Default
Sep 6, 2012C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
AutoCad 2D :: How To Break Multi Line Text Into Single Text
Dec 23, 2013I have multi line text i want to break in one text suppose i have 3 word in multi line text
so i want to break separate like i-love-you as well
AutoCAD Civil 3D :: Feature Line Style For Curb Return With Markers At The Deltas
Dec 5, 2013I am trying to create a feature line style that would include markers similar to minor stations of an alignment at the End Points and 1/4D, 1/2D & 3/4D locations. The thought is that I could use these on curb returns, and the markers would identify the locations we provide construction staking.
View 7 Replies View RelatedAutoCAD Civil 3D :: Edit Label Text In Parcel Label
Jan 3, 2013Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedAutoCAD Civil 3D :: Break A Closed Feature Line
Jul 28, 2011I often use feature lines for parking lots and ponds. They're great when they work, but they drive me NUTS when they don't - which is a lot of the time. For parking lots and ponds, my feature lines usually close back on themselves. That's when I have trouble breaking the feature line. When I use BREAKFEATURE, I choose two points and this should, in theory, leave a gap in the feature line between those two points. That's not what happens. I end up with a huge gap between the first point I picked and a vertex point 5 or 6 vertices away. It doesn't matter where I pick the breaking points.
I've also tried TRIMFEATURES. I draw lines across the feature line where I would have chosen the breaking points. But the portion that I want to remove is the portion that always remains. It doesn't matter where I select the feature line to be trimmed (inside or outside of the cutting edges).
I think there may something wrong with the feature line itself. Sometimes, if I erase the original and draw a new one, it will trim just fine. But that's such a headache, and it doesn't always work. If I knew what was causing the feature lines to go squirrely, I would aviod it. Unfortunately, it seems like breathing the wrong way can screw up a feature line.
AutoCAD Civil 3D :: Line Break In Survey Point Description
Mar 27, 2013Is there a way to have a multiline point description? For example, in the raw description, i wrote out the text, but I would like to return a line for the parentheses.
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
AutoCAD Civil 3D :: Adding Feature Lines To Surface As Break Line
Jan 31, 2012When adding break lines to a surface, a dialog box like appears that asks for weeding factors and supplementing factors. What I would like to know is, how can I change the defaults to reflect the settings needed on my project.
I am using C3D 2009.
Illustrator :: Put Line Break In Text In The Data Box When Creating Chart?
Feb 5, 2014Can you put line break in text in the data box when creating a chart.
i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
CorelDRAW Graphics Suite X6 :: X6.4 - Line Break And Text Background Color
Nov 12, 2013when I switch tab once at the end of the line sits the line break outside of the paragraph text frame..The background color so then runs out of the frame.A wish at left line intent (or right) it should be possible to fill these also with the background color and a function that assigns every second line is a background color..
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Get Azimuth Label On Line
May 29, 2012how I can get an azimuth label on my line?
View 5 Replies View RelatedAutoCAD Civil 3D :: Feature Line Name To Label?
May 19, 2013I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.
how to add the name into a label style?
AutoCAD Civil 3D :: Line Label Precision
Oct 26, 2011Unable to change line label precision (both bearing and distance).
The goal is N10d10'10"E, 100.00'
Civil 3D 2012 is giving N10d10'10.00", 100.000'
I am using a template with the distance precision set to 2.
The drawing setting->Ambient settings distance precision are set to 2.
The feature settings distance precison is set to 2.
AutoCAD Civil 3D :: Contour Label Line
May 31, 2013I have been creating contour surface labels, which utilize a 3-point contour label line with grips to adjust, and this is my question:
when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches. i can manually fix this by shorting the line, but this seems very inefficient.
1. is there a setting to have the label only placed on the center grip of the three?
AutoCAD Civil 3D :: Blocks In Line Label Styles
Feb 15, 2012I have a line label style that consists of two blocks (crowsfeet). The blocks are taking on the properties of the current layer when xrefed. I have enclosed a couple of drawings to show this behavior.
Open the "crowsfeet sheet" drawing. You will notice the crowsfeet are green.
Change the current layer and regen. The crowsfeet will change to the color of the current layer.
To take this one step further:
Freeze the current layer in the current viewport. The crowsfeet disappear.
Change the current layer. The crowsfeet reappear with the color of the current layer.
The objects in the blocks are on layer 0 with a color of bylayer. Changing the color to byblock produced the same results.
The only workaround I found was to change the color of the objects in the block to something other than bylayer or byblock.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
AutoCAD Civil 3D :: Dragged State For Line Label?
Jun 24, 2013I have a line label style that I created for labeling bearing and distance. The Dragged State Component for display is set to "As Composed", because I want to just slide it down the line a bit, but have it remain at the same rotation as the line, and it is not allowing me to do so. I also have a label style set up for "Stacked Text" and that works fine when I move it away from its original line I labeled
View 2 Replies View RelatedAutoCAD Civil 3D :: Area In Acres From Line Label
Nov 15, 2012Is it possible to insert a formula or is there an existing expression I could use to calculate area in acres from a General Overall Length line label if I input the width?
View 5 Replies View RelatedAutoCAD Civil 3D :: Delta Z Of Feature Line In Label
Aug 16, 2012I have a plan I want to create a table of feature line (the ones used as ditch cl's) with the designation (ie R1), the overall length (this part I can do) and then the Delta z of the entire feature line. I can get segment Delta z, but not the entire Delta z.
View 4 Replies View RelatedAutoCAD Civil 3D :: Line Bearing Label Expressions?
Nov 15, 2012I am trying to get my bearing label short name spaced to read with a "." after the N & E. Example: N. 00 00 00 E.
View 9 Replies View RelatedAutoCAD Civil 3D :: Line Label Style Expression?
Dec 12, 2012I am looking for a Line Label Style Expression which will perform a rounding function on distance labels that display my "General Segment Length" value.
What I need is to be able to remove "Trailing Zeros" from my distance values, so that if precision is set to say 0.01 and my distance value is measured as 45.5, I do not get 45.50 but 45.5.
I need this to round for:
1 decimal place
2 decimal places and
3 decimal places
AutoCAD Civil 3D :: Label Line Between Two Points Drag State?
Dec 21, 2012Why doesn't the drag state work when adding a line label between 2 points in Civil 3D 2013.
View 2 Replies View RelatedAutoCAD Civil 3D :: Line Label Tags Not Labeling Consecutively
Aug 25, 2011Curve tags number okay but the line tags keep numbers when curves are in between. Happens in both 2011 and 2012.
View 1 Replies View RelatedAutoCAD Civil 3D :: Label Grade In Line In Profile View
Jul 16, 2012I have a regular AutoCAD line in a profile view and wondered if there is a way of labeling the grade of the line. I'd think I could use and expression to calculate it. But I don't know how to automatically adjust for the vertical exaggeration without having to have a separate expression for all possible situations.
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Label Delta From A Curve To Non-tangent Line
Jun 19, 2012I need to lable the delta of a PI in an alignment where one segment is an arc and the following is a non-tangent line.
Geometry points don't offer delta and Tangent Intersections won't label at PCs and PTs.
Is there an expression that can be used?
AutoCAD Civil 3D :: Line Segment Label Anchor Point
Jan 30, 2013I am trying to create surface elevation labels along a polyline and I am having an issue with the label anchor point. I have created a line label style that uses a reference text to produce the elevation from a specified surface, however when I insert the label the default anchor point for the label is in the center of the line segment and that is where the reference text is taking the surface elevation. I am looking for the elevation of the surface at the start of each line segment, and I do not know how I can make it stop defaulting to the center of the line segment.
Attached is an overview of what my labels look like, where the anchor point is, and the layout properties within my label style. I am using C3D 2012.
AutoCAD Civil 3D :: Feature Line Vertex Elevation Label?
Feb 22, 2010I've seen a label style somewhere that can label the elevation of vertices and elevation points on feature lines. How to style or a procedure for creating a style for this?
I've found a couple of blogs that layout the steps for a style but it seems there are a few ways to do it so I'm looking for what could be considered the most effective/versatile approach.
AutoCAD Civil 3D :: Line Label Macro For Multiple Labels
Apr 12, 2013Is there a way to create a macro to label a line with a particular style?
I label my feature lines with three styles: multiple - segment grade, multiple - segment start elevation & single - segment end elevation. I want to make a macro for each of these that I can put on a button. It would be nice to combine the two multiples too if that is possible.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600