AutoCAD Civil 3D :: How To Label Delta From A Curve To Non-tangent Line

Jun 19, 2012

I need to lable the delta of a PI in an alignment where one segment is an arc and the following is a non-tangent line.

Geometry points don't offer delta and Tangent Intersections won't label at PCs and PTs.

Is there an expression that can be used?

View 3 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Curve Label To Display Delta In Degrees / Minutes And Seconds

May 27, 2010

I'm using civil 3d 2008 and trying to lable my pavement radius with Line and Curve Label but the delta setting is only in decimal, how do i get it to read degrees, minutes and seconds.

View 4 Replies View Related

AutoCAD Civil 3D :: Delta Z Of Feature Line In Label

Aug 16, 2012

I have a plan I want to create a table of feature line (the ones used as ditch cl's) with the designation (ie R1), the overall length (this part I can do) and then the Delta z of the entire feature line. I can get segment Delta z, but not the entire Delta z.

View 4 Replies View Related

AutoCAD Civil 3D :: Make A Curve Label With All Its Elements (radius / Tangent)

Oct 10, 2012

I want to make a curve label with all its elements (radius,tangent...) and the data of widenning and superelevation on the curve?. I attached the label that I want to create on C3D.

C3D 2012
Win-64 bits

View 1 Replies View Related

AutoCAD Civil 3D :: Setting Up Line And Curve Label Style

Jan 26, 2013

We are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template

I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.

After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.

i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?

View 6 Replies View Related

AutoCAD Civil 3D :: Alignment PI Label With Lat Long / Station And Delta Angle

Feb 27, 2013

We are trying to label the intersection points on an alignment with the following info:

Sta:
Delta Angle
LAT
LONG

We can make it work with a Northing and Easting, but there is no option for a LAT LONG under the tangent intersection labels.  I tried to make an expression that would format a Northing as a LAT but it just gave me jibberish.

I was able to do it but adding a point at each PI and making a point reference text, but you then have to select a different point for each label....  which works but it is still a multi step process.

View 9 Replies View Related

AutoCAD Civil 3D :: Tangent Label List

Aug 1, 2013

I have a long (2+ mile) alignment that has many "tangent intersection labels" which have station and delta angles. I need to create a table that lists the stationing and the deltas. How I can get this info. I have tried pipe networks and alignment tables w/o success.

View 2 Replies View Related

AutoCAD Civil 3D :: Corridors Surfaces And Intersections - Move Each Curve And Tangent Separately

Mar 16, 2012

Heres the issue;

I created my main corridor which is a 4 lane arterial with ditching on both sides targeted to my prelim surface. On my main corridor i have several intersections and approaches which i created intersections for and set the targets so they are correct, i also created secondary roads for all intersections. Now that it is visually correct there is a few things i would like to do.

1) Combine all intersections to my main corridor and create surface for adjusted volumes.
2) Raise combined corridor and intersections to adjust cuts / fills so that all attached intersection and adjacent corridors adjust with the main corridor.

Do i have to go to my main corridor profile and move each curve and tangent separately, then check all other profiles and intersection to insure everything has been adjusted?

View 6 Replies View Related

AutoCAD Civil 3D :: Prevent 3D Faces Objects When Exploding An Alignment Tangent Label

Nov 8, 2013

I received a drawing where I have to add Bearings to an alignment and Right-of-Way lines. I have a Line Label Style that it works for that purpose. These new bearings are "Alignment Tangent Labels" and we need them to be "MTexts"

Select & explode once, and you get "Block Reference"

Select & explode again, and you get "MText"

Once that is done, unfortunatly, I get "3D Faces" objects in the background. Invisible on the drawing, but visible on paper once we plot them. The only way to remove them is by selecting around the new MText until I click on one, then, right-click, Select simnilar, Delete!

Is there any way to prevent that to speed up the process???

View 1 Replies View Related

AutoCAD Civil 3D :: Line Not Tangent

Jun 18, 2012

Working on Acad2012 3d Civil. I draw a circle of 4000' radius and another one of 2000' radius. I put a tangent line between the two circles and I do see the tangent symbol but when I zoom in real close, it's not. So now I can't trim the excess radius of the two circle. I do have a trim line pasted the two supposedly tangent points. Is this a CAD issue or is their a variable to change that actually makes the lines tangent.

View 8 Replies View Related

AutoCAD Civil 3D :: Changing Profile Line Label Style Causes Label String To Revert To Default

Sep 6, 2012

C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).

However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.

Is there any way to turn this behavior off?

View 1 Replies View Related

AutoCAD Civil 3D :: Add Chord Bearing Chord Length And Tangent To Alignment Table With Curve Data

Apr 12, 2012

How can you add the chord bearing, chord length, and tangent to an alignment table with the curve data in it?  I have the length and direction but cannot figure out why the others will not load and update in the chart.  I am using Autocad Civil 3D 2012

Autocad Civil 3D 2014
Windows 7 Prof. SP1 (64-bit)
Precision T3500
Intel (R) Xeon(R) CPU W3550 @ 3.07 GHz
6.00 GB
NVIDIA Quadro 4000

View 5 Replies View Related

AutoCAD Civil 3D :: How To Label A Curve By Points

Aug 21, 2012

how to label a curve by points in C3D?  I'm finding half of the new "fix" (line by points). 

C3D - 2014, Sincpac Addon

View 1 Replies View Related

AutoCAD Civil 3D :: Curve Label Tags

Apr 15, 2013

My curve labels keep skipping. Why do they keep skipping from C6 to C9? I know how to use the renumber tags command. It just keeps skipping C7 and C8 for no apparent reason. There are no tags on frozen or off layers. When I add all possible objects to my curve table it does not change.

Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3

View 2 Replies View Related

AutoCAD Civil 3D :: How To Label The Curve With Its Degree Of Curvature (Da)

Aug 10, 2013

How to label the curve with its degree of curvature (Da)?

Degree of curvature (Da) can be calculated based on two different ways

Arc definition (considering 30 meters arc length):

Da=1719.74/R

Chord definition (considering 30 meters chord length):

Da=ASIN(50/Radius)*2

 The issue here is that there is not built in option to label the curve with its degree of curvature.

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 9 Replies View Related

AutoCAD Civil 3D :: Profile Curve Label Expressions

Apr 11, 2013

I have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is ??? for the value. I am currently running Civil 3D 2012.

IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}

View 1 Replies View Related

AutoCAD Civil 3D :: Reverse Vertical Curve Label?

May 9, 2012

handle a PRVC label? Right now I have the PVC and PVT labels on top of each other. Is there a nice solutioon other than making a new label style?

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 2 Replies View Related

AutoCAD Civil 3D :: Curve Tag Label Won't Display In Table

Jun 12, 2013

I have an alignment that is line and curve tagged for a table.  The last segment of the alignment is a 3 point curve.  It shows up in the alignment grid view, and is tagged.  When the table is produced the everthing comes in except the 3 point curve I mentioned.

View 1 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Label Not Displaying In Sheet Set

Mar 5, 2013

I am having an issue with my label displaying in my profile after I create my plan and profile sheet set. The PVC, PVI and PVT all show up, but the labels are not displaying. I looked through the layers and they are all thawed.

View 7 Replies View Related

AutoCAD Civil 3D :: Profile Crest And Sag Curve Label Expressions

Apr 11, 2013

I have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is? for the value. I am currently running Civil 3D 2012.

IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}

View 8 Replies View Related

AutoCad :: How To Draw A Tangent To Any Curve

Aug 5, 2011

How to draw a tangent to any curve(basically a spline).

View 9 Replies View Related

AutoCad :: Aligning Parabolic Curve Tangent To Two Points

Apr 2, 2013

I have come up with a parabolic curve from a 'Sag Chart' program for calculating wire sag between Utility Poles. I now need to place this curve into my Profile that has the poles laid out in it. I need to make the curve Tangent at each attachment point between two poles. The best I can do as of now is eyeball it in there which will get me the sag distance pretty closly but as any Autocad user knows if it isnt exactly aligned it will drive you nuts. I made a rough sketch of what im trying to do.

View 9 Replies View Related

AutoCAD Inventor :: Curve Driven Pattern - Multiple Tangent Curves?

Oct 22, 2012

Is there a way to use the curve driven (rectangular) pattern referencing two tangent curves (an arc and a tangent line). I'd like to be able to create this pattern of slots in one pattern, otherwise I'll have to make two cut features at each end and use one pattern for the straight and another for the curve.

View 6 Replies View Related

AutoCAD Civil 3D :: Curve And Line Tags

Feb 27, 2008

How to start back to curve & line tag number 1 after generating tags?

During Parcel creation I told it to apply curve tags and it did what it said, created curve tags. Never again until I get comfortable with it. Looks great but want to have some order here. It's really random. I know it's not LDD but in LDD you could clear tags and start over. How to do this in 3D? From what I understand even if you do not display tags they are still created right? So where do I set the default starting number? Settings > Parcel > Commands > CreateSite?

View 9 Replies View Related

AutoCAD Civil 3D :: How To Get Azimuth Label On Line

May 29, 2012

how I can get an azimuth label on my line?

View 5 Replies View Related

AutoCAD Civil 3D :: Feature Line Name To Label?

May 19, 2013

I am wanting to add the name of my feature line to a label style. I am trying to create a label style that will show Lot Number and Area. I know i can create parcels, but i dont want to! I have also created a map table that can do exactly what i want on polylines, but will not work on an xref. Labelling featurelines does work in xrefs.

how to add the name into a label style?

View 4 Replies View Related

AutoCAD Civil 3D :: Line Label Precision

Oct 26, 2011

Unable to change line label precision (both bearing and distance).

 The goal is N10d10'10"E, 100.00' 

Civil 3D 2012 is giving N10d10'10.00", 100.000'

I am using a template with the distance precision set to 2.

The drawing setting->Ambient settings distance precision are set to 2.

The feature settings distance precison is set to 2.

View 9 Replies View Related

AutoCAD Civil 3D :: Contour Label Line

May 31, 2013

I have been creating contour surface labels, which utilize a 3-point  contour label line with grips to adjust, and this is my question:

when i create a single contour label, clicking specifically on a contour i want labeled, the contour label line with the 3-grips extends beyond several contours and thus places a label at every contour it touches.  i can manually fix this by shorting the line, but this seems very inefficient. 

1. is there a setting to have the label only placed on the center grip of the three?

View 2 Replies View Related

AutoCAD Civil 3D :: Line And Curve Labels And Tables

Jun 22, 2012

I am doing a project and I have a lot of feature lines.  I will need to be able to lable these feature lines with tags and then create tables for those.  My question is, is there an easy format that I can do that will lable these lines in an order I set it up?  Right now it just lables all over the place. The lines are counting the curves too.  For example: L1 L2 L3 C1 L5 L6 C2 L8.  I can make it work, would just think there is a better way.  BTW I am using Civil 3D 2011.

View 1 Replies View Related

AutoCAD Civil 3D :: Line / Curve Labels Button

Jan 24, 2013

Im trying to access the line labeling via the lines/curves menu heading on the main menu bar but i dont have the Lines/Curves drop down button. Is there a command i can enter to show this menu bar?

View 1 Replies View Related

AutoCAD Civil 3D :: Grips For Labels For Line And Curve Does Not Use Z Changes?

Aug 28, 2013

I'm using label for line & curve. 

I have discovered that the points from it is created are fixed in Z value.

You can use the grips with object snap , you can move the grips but the Z values are  preserved......

it should be to get the Z value of X,Y,Z given by object snap , isn't it ?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved