I'm using civil 3d 2008 and trying to lable my pavement radius with Line and Curve Label but the delta setting is only in decimal, how do i get it to read degrees, minutes and seconds.
View 4 RepliesHow do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
when trying to input the bearing in degrees minutes and seconds I have to input (for example) 89%%d49'38". how do i change it so i can input ddmmss?
View 5 Replies View RelatedI need to lable the delta of a PI in an alignment where one segment is an arc and the following is a non-tangent line.
Geometry points don't offer delta and Tangent Intersections won't label at PCs and PTs.
Is there an expression that can be used?
how to set line direction by N,E,S,W by degrees, minutes and seconds.
i.e.. drawing a plot plan laid out by a surveyor.
Must I convert to degrees for polar coordinates or is there a way to directly insert these angles?
I would like to know, whether there is a way for diplaying arc-degree values not only in whole degrees but also including minutes and seconds. Couldn´t find a way to define this...
I am using AutoCad 2011 for Mac, Version 18.1.49.62, on a MacbookPro 2,1 (2,33 GHz, 2GB RAM; 17")
By the way, how do I create a signature for postings in here?
I have an alignment that is line and curve tagged for a table. The last segment of the alignment is a 3 point curve. It shows up in the alignment grid view, and is tagged. When the table is produced the everthing comes in except the 3 point curve I mentioned.
View 1 Replies View RelatedI have a plan I want to create a table of feature line (the ones used as ditch cl's) with the designation (ie R1), the overall length (this part I can do) and then the Delta z of the entire feature line. I can get segment Delta z, but not the entire Delta z.
View 4 Replies View RelatedWe are trying to label the intersection points on an alignment with the following info:
Sta:
Delta Angle
LAT
LONG
We can make it work with a Northing and Easting, but there is no option for a LAT LONG under the tangent intersection labels. I tried to make an expression that would format a Northing as a LAT but it just gave me jibberish.
I was able to do it but adding a point at each PI and making a point reference text, but you then have to select a different point for each label.... which works but it is still a multi step process.
I've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
I am having an issue with an external reference. It is basically a 3D drawing of a few trusses with truss bracing installed. I include it with almost every set of drawings. Problem is it often causes my AutoCAD to lock up for 30 seconds to 10 minutes. The problem occurs when switching from paper space to model space or when I load the drawing file.
View 3 Replies View RelatedHow do I get Inventor 2009 to measure in degrees and minutes. Below is what I am trying to do.
View 3 Replies View RelatedCannot find a way to set up angular dimensions to show that first zero if the minutes or seconds value is less than ten.
Desired: <degrees>08'05"
Stuck with: <degrees>8'5"
Is there any way to change the format of Lat/Long in a C3D point list display from degrees, minutes, seconds to decimal degrees? I have looked pretty hard, but can't find anything. The geodetic calculator only does one item at a time, I think. Any plug-ins out there? I suppose this could be on a wish list as well.
I am using R2012.and have ended up manipulating point values in Excel-not a quick way of going about it.
My Photoshop Elements freezes up after 30 seconds to 3 minutes of use. What can I do to fix this?
View 2 Replies View Relatedhow to label a curve by points in C3D? I'm finding half of the new "fix" (line by points).
C3D - 2014, Sincpac Addon
My curve labels keep skipping. Why do they keep skipping from C6 to C9? I know how to use the renumber tags command. It just keeps skipping C7 and C8 for no apparent reason. There are no tags on frozen or off layers. When I add all possible objects to my curve table it does not change.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
How to label the curve with its degree of curvature (Da)?
Degree of curvature (Da) can be calculated based on two different ways
Arc definition (considering 30 meters arc length):
Da=1719.74/R
Chord definition (considering 30 meters chord length):
Da=ASIN(50/Radius)*2
The issue here is that there is not built in option to label the curve with its degree of curvature.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is ??? for the value. I am currently running Civil 3D 2012.
IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}
handle a PRVC label? Right now I have the PVC and PVT labels on top of each other. Is there a nice solutioon other than making a new label style?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I am having an issue with my label displaying in my profile after I create my plan and profile sheet set. The PVC, PVI and PVT all show up, but the labels are not displaying. I looked through the layers and they are all thawed.
View 7 Replies View RelatedI have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is? for the value. I am currently running Civil 3D 2012.
IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}
We are upgrading from LDD2008 to Civil3D 2013. I'm working on a Civil3D template
I'm setting up line and curve label style. Oringally we were going to have one set of line label style. Ex. Bearing Above or Bearing Below. After seeing that the line labels does not look at the current text style we decided to make copies of the original label styles based on Text Styles.So now I have Bearing Above60, Bearing Above100, etc. I named them based on the Leroy styles and sizes.
After editing each one and changing the Text Style each one looks at, it is not using the Texting Style i assign it. I'm doing this in the General Tab and Text Style for each label style.
i guess I should have tested before creating all them to find out it didn't work.Does it need to be done somewhere else or is do I have to do something with the overall label style overrides?
I want to make a curve label with all its elements (radius,tangent...) and the data of widenning and superelevation on the curve?. I attached the label that I want to create on C3D.
C3D 2012
Win-64 bits
when i create a point it does not display (label or point). if i create a point group with overrides for the point and label style the points display. the default point and label style are set to the same styles as the overrides.
View 2 Replies View RelatedA way to change the display order of pipes connected to the structure in a structure label? (plan and profile) Say you have a 10", 6" and 12" pipe connected to a structure, modeled in that order, so label would place them 10, 6, 12. we would like the label to display the order as 6,10, then 12 without having to drag the pipes off and then having to re-input inverts.
View 6 Replies View RelatedMy dragged state leader does not display properly. The attachment runs through my first line of text. My display is set to "As Composed" I do not want the stacked text setting.
View 9 Replies View Relatedget 2012 to make an expression for curve delta angles come in DMS and not decimal degrees? Why do I need this? Well C3D does not have a delta angle label for curve pipe and our client requires it on the drawings.
View 9 Replies View RelatedI have created an alignment from an imported polyline. I now need to vary the delta angle between some of the tangents for different scenarios. I see the delta value in the panorama but it is not editable. Is there a way to enable it? If not, how can I adjust the angle parametrically?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
When I run the Map Check report in C3D 2010, the Delta angle on curves displays to a tenth of a second, no matter what I do with settings. It should display to the whole second.
View 4 Replies View RelatedI'm trying to build the ditch portion of my Subassembly backwards from an offset target "DitchOffset". The elevation of this point should be derived from a point that is using Slope and Delta Y from point "P12" (see attached). Must be at least 1m from the bottom of SubBase with a 5:1 slope.
The Ditch Bottom will be variable width. I'd like to be able to select my offset alignment for my ditch bottom. Have a link from this point extend at a slope to the Target Surface to complete the foreslope.
I can't quite picture how to complete the links from the DitchOffset point. This may be complicated but the diagram identify what I'm trying to do.