I would like to know, whether there is a way for diplaying arc-degree values not only in whole degrees but also including minutes and seconds. Couldn´t find a way to define this...
I am using AutoCad 2011 for Mac, Version 18.1.49.62, on a MacbookPro 2,1 (2,33 GHz, 2GB RAM; 17")
By the way, how do I create a signature for postings in here?
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
how to set line direction by N,E,S,W by degrees, minutes and seconds.
i.e.. drawing a plot plan laid out by a surveyor.
Must I convert to degrees for polar coordinates or is there a way to directly insert these angles?
when trying to input the bearing in degrees minutes and seconds I have to input (for example) 89%%d49'38". how do i change it so i can input ddmmss?
View 5 Replies View RelatedI'm using civil 3d 2008 and trying to lable my pavement radius with Line and Curve Label but the delta setting is only in decimal, how do i get it to read degrees, minutes and seconds.
View 4 Replies View RelatedI am having an issue with an external reference. It is basically a 3D drawing of a few trusses with truss bracing installed. I include it with almost every set of drawings. Problem is it often causes my AutoCAD to lock up for 30 seconds to 10 minutes. The problem occurs when switching from paper space to model space or when I load the drawing file.
View 3 Replies View RelatedHow do I get Inventor 2009 to measure in degrees and minutes. Below is what I am trying to do.
View 3 Replies View RelatedCannot find a way to set up angular dimensions to show that first zero if the minutes or seconds value is less than ten.
Desired: <degrees>08'05"
Stuck with: <degrees>8'5"
My Photoshop Elements freezes up after 30 seconds to 3 minutes of use. What can I do to fix this?
View 2 Replies View RelatedI'm scultping a mesh of 1.8 million and everything is fine and smooth. After 3 or 4 minutes the program starts lagging badly to the point it is not usable. If I leave it idle for 10-15 minutes and resume it's fine again, for another 3 minutes. If I close the program and re-open it (as soon as it starts lagging) the lag persists. If I reboot it's fine (for 3 minutes of course).
I've tried changing the graphic's card driver (currently latest nvidia), changing the features in the nvidia control panel to min, and also the ones in mudbox. To be honest I don't think it's the graphic's card fault.
I thought it had something to do with the memory (leakage maybe?), so I did some tests but the working set size is stable at 300K and the virtual memory slowly goes up to 390K where it stops (this during the 3 minutes of sculpting).
I realize with mb 2012 there will be little interest in solving the old version's problems but I reckoned I'd give it a last shot. It's also a student edition so I can't upgrade.Here's my settings
OPERATING SYSTEM
Name: Microsoft Windows 7 Professional
Version: 6.1.7600
Service Pack: 0.0
Architecture: 64-bit
Registered User: Alessandro
Language: 1033
Domain Role: 0
Total Physical Memory: 4026 MB
Total Virtual Memory: 8388607 MB
[code]....
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
Is there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies View RelatedCurrently we change our printing equipment, Kyocera to HP.The problem is that before printed instantly (in seconds) and now it takes 20 minutes to 45 minutes.
For example:
1. - A 2D file with 655 KB they send to print and goes to the print queue with a weight of about 40 MB.
2. A 2D file with 2MB send it to be printed and the print queue with a weight of about 40 MB.
HP 9050 with PCL6 Universal Printer Driver, to which was added more memory and hard drive and still the same.
Win XP sp3
AutoCAD 2010 with the service pack installed
2GB RAM
NVIDIA Quadro SX1700
How do i get the leading zero to show on an angular dimension for the seconds? as in: 108d 36' 03" ?
View 1 Replies View RelatedI have prepared an animation which is 50 seconds long. Now, i just want to render that animation, but i couldn't.
The problem is that if i select "Entire Animation" option for the time range, and click the "Render" button, i obtain just an image rendered (1 frame) and if i try to write the time range manually by selecting the "Specified Time Range" option, i've realized that it is not allowed to specify a value greater than 30 secs. When i write "30.1" for instance, the forecolor of the input box turns red, and a message appears if i click the "Render" button, saying "Invalid Expression!"
"Help" says, "You can adjust any value in the input box.", however.
I've solved the problem by making two seperate animations and merging them by using an other video editing software, but i didn't satisfy the topic. Is there a limitation due to "something" or am i doing something wrong?
2009 constantly freezes up on me for a few seconds almost ever minuet. what can I do to stop this?
View 9 Replies View RelatedI am trying to find out a good way to calculate hours minutes seconds , know a good program I can use on my phone. I am trying to add
35:42:16+17:53:57
I am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
View 5 Replies View RelatedWe have 10 MB DWG file containing Electrical network Map with 25,000 customer numbers as block attributesIn AutoCAD 2013 LT the searching of above block attributes using “FIND” command is very very slow (almost 2 to 3 minutes to perform the search)Also the closing of “FIND” windows takes lot of time“FIND” command was working fine in earlier version of AutoCAD 2008 in same computers (Dual core PC, 2 Ghz, 2 GB RAM)
View 9 Replies View RelatedI have an assembly I've been working on for a while. It was fine until after opening it one day, any changes I make cause inventor to freeze up for several minutes before completing whatever it is that I was trying to accomplish. Most of the changes are with constraints (adding parts and constraining them or changing constraints that were already in place), but I even tried to just rotate a part and Inventor locked up. I'll get the green loading bar at the bottom right corner, and it will run through a couple of times before it stops. The freezing seems to be tied to this assembly only, but I'm trying to find any other way to fix the problem before having to completely restart the assembly. I've worked with bigger assemblies before and have never run into this problem.
View 9 Replies View RelatedI want to set my autosave (In Options) at 30 minutes but it seems that my Civil 3d 2012 sets itself back at 10 minutes.
I even try to set it in the dialog box with SAVETIME command at 30 minutes but it gives me the a prompt telling that its been setted at 10 minutes.
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
I've been generally having trouble with Civil 3D 2012 taking a long time to do tasks. One that takes quite a while is if I drag a Cogo Point Label. As stated it takes about 75 seconds. It will move to where I drag it immediately but then the program is unresponsive for a minute and 15 seconds.
In the past 4 days I've repaired C3D, tried 4 or 5 different versions of the display driver and did a windows update. A lot of commands, specifically Civil 3D commands, are very slow. Does this ring any bells?
Civil 3D 2012 with SP (Update) 1
NVIDIA Quadro FX 4600 768MB GDDR3 (Tune log reports 2530 MB)
Driver 8.17.0012.9670
How do I pause for a certain length of time 5 seconds or 10 seconds.
View 6 Replies View RelatedUpon selecting anything in 90% of any drawings the crosshairs disappear and CAD2014 freezes for 2sec.
It's a Dell Presicion T1600, Xeon 3.4Ghz, 16GB RAM, Quadro2000 with a 120GB SSD as the primary running CAD2014 premium.
It started recently.
This happens even if I toggle HW acceleration. We draft mainly in model view with the 2D Wireframe style.
Using acad 2010,I'm attaching an XREF to my drawing,But it comes rotated, I saw that in the xrefed drawing the wcs isrotated.I guess if I'll set it to pyre 90 degrees ill get it fixed.
How can I set the wcs to the defult 90 degrees?
I have a 16GB Raster that we use for Design/Proposal purposes. Is there anything I could do to potentially improve load time or is this something I'll just have to live with?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
If I try to hatch, it takes minutes for the command to process. Any settings I need to check?
View 6 Replies View RelatedNeeded to rotate my plan 180 degrees. So I typed in UCS enter then z enter then 180 enter and then plan enter. My plan rotated and it looked fine. I noticed my crosshairs where now green and red. I needed to add more things to my drawings but the lines I was drawing do not look straight - they look bent and the ucs icon doesnt look square. I attached my drawing for you to see what I am talking about
View 1 Replies View RelatedHow do i draw a leader with all 90 degree angles. When i'm drawing a leader with an arrow for example and select two points it makes an angle.
View 4 Replies View RelatedI have a corridor with intersection.The intersection isn't 90 degrees. Can I cut corridor with(for example) 45 degrees?
View 9 Replies View RelatedHow do i convert pitch to degrees, in order to get the proper angle?
View 6 Replies View Related
