AutoCad :: Convert Pitch To Degrees
Sep 17, 2012How do i convert pitch to degrees, in order to get the proper angle?
View 6 Replies
ADVERTISEMENT
AutoCad :: Convert Coordinates To Decimal Degrees
Feb 22, 2011I have a dxf file from a client created using autocad. What these coordinates mean -40 558.37E and -46 244.43 N. These are UTM? I need to convert to decimal degrees. How do I do this?
View 9 Replies View RelatedAutoCAD Civil 3D :: Export Parcel Analysis To Show Degrees Minutes And Seconds Instead Of Default Decimal Degrees
May 18, 2012How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
AutoCad 2D :: Draw Garage With 8/12 Roof Pitch
Jun 12, 2012Im trying to draw a garage with an 8/12 roof pitch but I don't even know where to start with the roof. I just got out of autocad 1 but we didn't talk about roofs. It is a 27x25 garage.
View 2 Replies View RelatedAutoCAD Inventor :: How To Create ISO Screw With Custom Pitch
Oct 11, 2013I need a screw M16 x 0.25 mm. However, I don't have the option "0.25mm". How to create a screw with custom pitch size?
View 2 Replies View RelatedAutoCAD Inventor :: Create A Hole Note Without Pitch?
Nov 9, 2012is it possible to create a hole note without pitch.
i use standard thread in most cases so i just want the thread to be shown in the holenote tool on drawings (like M8 not M8x1,25)
AutoCAD Inventor :: 2013 - How To Cut A Profile In Shaft Along A Pitch
May 30, 2013i am trying to design a shaft with a cut out that would cut along the shaft a a set angle and wrap around the shaft.
I am going to have a bearing ride along the cut out and cover this to a linear motion but can't seem to grasp how you do this in inventor 2013.
AutoCAD Inventor :: Double Pitch Chain Animation
Nov 12, 2013How to model a double pitch chain with sprockets so that it can be animated to show visual movement/rotation.
This chain assembly is made up of 6 sprockets.
AutoCAD Inventor :: Call Out Tap Pitch Value Without Editing Dimension
Jul 4, 2013In the inventor drawing, while showing hole callouts for TAP, it is coming along with thread pitch (Ex: M12 x 1.5). But I dont want to show the pitch. How to call out only TAP size(Ex:- M12) without editing the dimension.
View 3 Replies View RelatedAutoCAD Architecture :: Change Slope To Match 12/12 Pitch?
Oct 8, 2012I am editing a wall. in the roof and floor line edit, I added a gable, now I need to change the slope to match 12/12 pitch. How do I do this?
View 1 Replies View RelatedAutoCAD Inventor :: Display Pitch Diameter On External Thread
Oct 12, 2013When we make an external threaded part, like a stud or something, I'd like to save my lathe guys some time looking things up by showing the pitch diameters on the thread callouts.
I've looked through some posts on this and it doesn't seem like there's an easy way to do it in an automated fashion, even though the data is in the Thread.xls file. I'd really like to not have to look it up to make every print.
First, I thought I'd just use the "Custom Thread Designation" field, but as soon as I changed it in the XLS file, I kept getting alerts in Inventor saying that there was an error in the thread family because the callout applied to multiple fit classes or something like that. So that didn't work out very well. So....
1. Is there a way to do this?
2. What is the point of the "custom thread designation" infrastructure? Am I not using it correctly?
Inventor 2014 64-bit SP1
Win 7 Pro 64-bit SP1
AutoCAD Inventor :: Variable Pitch Helix By Equation Curve
Jun 20, 2012You can create a variable pitch helix by using the Equation Curve feature introduced in Inventor 2013.
Create a new 3D Sketch. Start the Equation Curve command.
Here are equations that I use to create helical curves. Many other variations exist.
Cartesian coordinates:
x(t) = radius * sin(360 * num_turns * t)
y(t) = radius * cos(360 * num_turns * t)
z(t) = height * t
[Code]....
When you sweep a profile along a helical path, use the plane normal sweep (instead of perpendicular sweep) to orient profiles suitable for coil or spring. In the example below, the sweep path is a constant radius, variable pitch helix.
AutoCAD Inventor :: Conical Spring That Can Change In Pitch As It Tapers?
May 23, 2013I need a conical spring that can change in pitch as it tapers. Basically the spring starts in a compression style and tapers down to an expasion style. The CNC spring machines are capable to produce it, but am I able to, through Inventor? If not when will we have this feature capability?
View 7 Replies View RelatedAutoCAD Inventor :: Create 3D Sketch Of Helical Curve That Has Accelerated Pitch?
Nov 1, 2013I am trying to create a 3D sketch of a helical curve that has an accelerated pitch.
View 2 Replies View RelatedVideoStudio :: Raise / Lower Pitch
Aug 4, 2013I am having problems using VideoStudio 15 to convert a PAL-based file to NTSC.
What I want to do is lengthen the video and to lower the tone/pitch with it (from 25 fps PAL to 23.976 fps NTSC, pull-down style).
Revit :: Roof Pitch - How To Get 4/12 Or 5/12 And So On From Fractions
Oct 6, 2011Determine the roof pitch, then it has the typical triangle with 1/2 pitch and 1/4, 1/3, 1/6 and so on. I know rise over run like 5/12, but don't understand the fractions. How do I get 4/12 or 5/12 and so on from the fractions?
View 4 Replies View RelatedPremiere Pro :: High Pitch Noise In CS4 And CS5.5
Mar 1, 2014I recently tried Premiere Pro CS5.5 and CS4 (trial version) to replace my Corel Video Studio X6 which tried to replace Windows Movie Maker. Video Studio and Movie Maker both crash whenever I imported large video files.
Anyway I'm getting a problem where the video files I import to Premiere Pro CS4 and CS5.5 have a high pitch noise in the video preview.
It's a high pitch noise almost like it's getting feedback from something. Also when someone is supposed to be talking there's a very low distortion, like the audio started playing in very slow motion but the high pitch noise is still present.
I'll put a link at the end with the video file that's giving me trouble.
The video and audio are in a single AVI file. The video format is H264 shot at 60fps and the audio should be Mpeg-1 L2, 48khz at 320kbps. I don't know if the video's audio is in 24bit or 16bit.
I've tried different settings for premiere. Trying 60fps and 30fps for the framerate for the project. Trying 44khz and 32khz and 96khz didn't fix it. Using the "Desktop" preset in CS4 and Custom for CS5.5.
My audio hardware is a Logitech G930. It's a wireless USB headset with microphone. My motherboard audio is Realtek HD Audio. Both are enabled but I only use the headset now and nothing is being sent to the Realtek audio chip (according to Windows' sound options). The headset plays audio at 16bit 48khz.
The video file plays fine in every media program I own that can play the h264 codec. With the exception of Movie Maker and Video Studio x6. Video Studio will preview the video and audio just fine but when I try and skip around the program hangs and crashes. Movie Maker just plain crashes when I try and import the video. Some of the programs that can play the video are VLC, Media Player 11, and Media Player Classic.
I'm not sure if Final Cut Pro has the same problem. I don't have a Mac so I can't test it.
Here's a sample video that works the way it should. I pulled a BIK file from a game and converted it to H264 in AVI. Not sure what it's audio format is.
[URL]
Here's an afflicted file. Not the exact specific file I have been talking about, but it has the same codecs. This one is shorter in length and smaller in size. It still has the high pitch noise, but since there is no one talking in this you don't hear the weird low pitch distortions.
[URL]
Revit :: Reporting Parameter For Stair Pitch
Jul 25, 2013Is it possible to create a Stair Tag with the pitch reported? I have a tag which includes the number and height of rises as well as the size of treads but I would like to include the pitch also. Obviously this would use the dimensions of the rise and tread in the formula Tan X = Rise/Tread, but how do I create this in a tag? I have looked at using a Reporting Parameter but every time I read the Wikihelp paragraph on them my eyes just glaze over as I cannot follow it at all but it does mention formulas....
View 8 Replies View Related3ds Max :: Viewport Screen Dims Down Until Its Almost Pitch Black
Jul 18, 2012Whenever I put the object setting to "realistic," the whole viewport screen dims down until its almost pitch black. It returns to its normal brightness only when you zoom in or out, pan around the view, or when an object in the viewport is modified. I've attached two images along with the post, showing how the viewport appears before and after it dims down.
I'm wondering whether this an actual intended feature of 3DS Max, or if it's a problem.
Photoshop Elements :: Adjusting Vertical Pitch Of An Object?
Jan 30, 2014I'm using PSE 12. How do a gradually adjust the vertical pitch of the principal object in a photo to true perpendicular?
View 1 Replies View RelatedRevit :: Change Pitch Of Top Chord By Increasing Ridge Height
Sep 3, 2013I'm building a PEMB frame family partly to teach myself and because none of the ones I could find online match the ones I'm working with. It's been a bumpy road but I've gotten the family to the point where there are parameters and elements for the flange, web, baseplate & girts.
Where I've run into a problem are the bracing flanges. The flange at the top of the column was simple enough since it's always horizontal but the beam braces are all 90 deg to the top chord. Any refrence plane or reference line drawn from the intersection of the bottom & column chords to the top chord does not move with the other chords when the family types are changed. I applied a 90 deg angular dimension constraint between the top chord and the bracing flange but when I change the pitch of the top chord by increasing the Ridge Height Revit gives me a warning message that the constraint is no longer satisfied instead of rotating the flange!
AutoCAD 2010
AutoCAD LT 2013
Revit Architecture LT 2013
AutoCad :: How To Set WCS To Default 90 Degrees
Jan 27, 2013Using acad 2010,I'm attaching an XREF to my drawing,But it comes rotated, I saw that in the xrefed drawing the wcs isrotated.I guess if I'll set it to pyre 90 degrees ill get it fixed.
How can I set the wcs to the defult 90 degrees?
AutoCAD LT :: Rotate Plan 180 Degrees
Sep 15, 2012Needed to rotate my plan 180 degrees. So I typed in UCS enter then z enter then 180 enter and then plan enter. My plan rotated and it looked fine. I noticed my crosshairs where now green and red. I needed to add more things to my drawings but the lines I was drawing do not look straight - they look bent and the ucs icon doesnt look square. I attached my drawing for you to see what I am talking about
View 1 Replies View RelatedAutoCad 2D :: Drawing Leaders At 90 Degrees
Jun 16, 2012How do i draw a leader with all 90 degree angles. When i'm drawing a leader with an arrow for example and select two points it makes an angle.
View 4 Replies View RelatedAutoCAD Civil 3D :: Can Cut Corridor With (for Example) 45 Degrees
Nov 6, 2013I have a corridor with intersection.The intersection isn't 90 degrees. Can I cut corridor with(for example) 45 degrees?
View 9 Replies View RelatedAutoCad 2D :: Cross Hairs Are At 45 Degrees
Nov 16, 2011I am an occasional user of AutoCAD. I have a received a drawing from a company where the cross hairs are at 45 degrees and I can only insert dimensions at 45 degrees.
I have tried PLAN > Enter > Enter . This rotated both the cross hair and the drawing 45 degrees
AutoCad :: Setting 0 Degrees As North?
Apr 11, 2013my default 0 degrees is set at east. setting 0 degrees as north, south etc
View 6 Replies View RelatedAutoCAD Inventor :: Sketch Flipping When Going More Than 180 Degrees
Feb 20, 2013Here's the situation:
I have a tube, approximately 16" O.D., 14" high, and 1/8" thick. This is all a single part.
I'm trying to cut 3.5" wide and 4" tall slots around the top. The number of slots can be 1-6.
I'm driving the size and slots from a spreadsheet.
The orientation of the slots can have the first slot anywhere from 0 to 360 degrees. (FWIW, the spreadsheet redefines 0 and .0001 and 360 and 359.99).
Anyhow, as long as the first slot is between 0-180, it works just great. Once you pass 180, however, the verticals of the sketch flip so it's barely cutting the notch at all.
To make the cuts i've created a sketch off the top of the cylinder and drawn a construction line at 0 and another and put a driven dimension between them to set the correct position of the angle. I think create a workplane off that line tanget it to it's end point. At that point, draw sketch, extrude, etc.
I've also create a workplan off one of the origin planes and the origin Y axis that's perpendicular to the notch (angle driven by spreadsheet and equation in workplanes angle offset). Offset a 2nd plane tangent to the O.D. of the tube, created a sketch, extrude etc.
In both instances, when the angle crosses 180 degrees, the sketch flips on me.
What can I do to keep the sketch from flipping?
AutoCAD Inventor :: How To Measure In Degrees And Minutes
Feb 20, 2011How do I get Inventor 2009 to measure in degrees and minutes. Below is what I am trying to do.
View 3 Replies View RelatedAutoCAD Inventor :: Degrees Of Freedom Glyphs
May 16, 2013If there is a way to change the size of the 3d glyphs which display the degrees of freedom of parts within an assembly ? I need to alter them to be slightly bigger.
View 1 Replies View RelatedAutoCad :: Make Line Of 25 At Angle Of 150 Degrees
Nov 9, 2011I am currently using 2010 version of AutoCAD and I am having difficulties sorting out my angles.
I need to make a line of 25 at an angle of 150 degrees. Upon doing this it always goes the wrong direction to which I want the line to be facing.