AutoCAD Civil 3D :: Curb Return Grade Label
Mar 12, 2013How I could create a label for the curb return grade as shown on the attached file. The label is on a curve.
View 6 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Intersection - Curb Return
Feb 7, 2011C3D 2010 user
I have a problem modeling intersection. This is first time I am modeling intersection. I have gone thru' and actually did all intersection tutorials offered by C3D and naturally I felt like I am ready for it.
But in real world I am not. I am trying to model intersection and I keep getting error as "Value on Wrong side of alignment to profile". I looked at target mapping and thinks so that all is okay (may be not). I am attaching snapshot of error message as well as plan view. I wanted to forward actual dwg but size is too large to post.
Point to note:This is Left lane driving setting. I realized this after I created alignment/profile/assemblies but before I tried intersection modeling.
I did 8 iterations before this post.
AutoCAD Civil 3D :: 2011 - Creating Existing Curb / Gutter Spot Grade
Mar 21, 2012creating a existing surface single Curb/Gutter spot elevation label using two existing surface elevation points and not cogo points. I am a surveyor, and I want to be able to just click on both points one at a time (top of curb/gutter) to place the elevation label.
View 3 Replies View RelatedAutoCAD Civil 3D :: Intersections 2010 - Change Curb Return Radius
Feb 24, 2012Changing the curb return radius after the intersection has been created. I am able to go back to the curb return parameters dialog and enter a different value, but once I hit Enter or OK the value reverts back to the one I orginally used.
So it looks like I have to delete the intersection object and re-start the wizard from scratch. Not that it's a big deal, just thought there might be a way to make the change once the intersection is built.
AutoCAD Civil 3D :: Intersection In Assembly - Curb Return Takes Zero Elevation
Dec 9, 2013I am getting assembly problem as shown in attached fig where curb return takes zero elevation . However the same assembly working fine on other intersection
View 6 Replies View RelatedAutoCAD Civil 3D :: Feature Line Style For Curb Return With Markers At The Deltas
Dec 5, 2013I am trying to create a feature line style that would include markers similar to minor stations of an alignment at the End Points and 1/4D, 1/2D & 3/4D locations. The thought is that I could use these on curb returns, and the markers would identify the locations we provide construction staking.
View 7 Replies View RelatedAutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command
Feb 28, 2011I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
AutoCAD Civil 3D :: Profile Grade Label Reset?
Nov 7, 2013i've got a profile with a lot of grade labels, some of which i've turned the visibiliy off. i need to turn some, but not al,l of them on.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
AutoCAD Civil 3D :: Label Grade In Line In Profile View
Jul 16, 2012I have a regular AutoCAD line in a profile view and wondered if there is a way of labeling the grade of the line. I'd think I could use and expression to calculate it. But I don't know how to automatically adjust for the vertical exaggeration without having to have a separate expression for all possible situations.
View 5 Replies View RelatedAutoCAD Civil 3D :: How To Put Return / Break To Another Text Line In A Label
Feb 27, 2013How to put a (Return) or Break to another text line in a label? Usually it is one big long label on one line.
View 4 Replies View RelatedAutoCAD Civil 3D :: Curb Height Transitions
Aug 21, 2013Trying to model a curb height transition in my corridor. Over about 15' I want to go from a 6" curb to flush.
The only way I can seem to get it to show accurately is to leave a void in my corridor. This allows the surface which is created from the corridor to model correctly and give me a transition of my curb height from 6" to flush. Here's the object viewer showing it correctly:
However, there are a few problems with this approach. Mainly I've come to like the way the relatively new "extract corridor solids" tool (toolspace, toolbox, miscellaneous Utilities, corridor solids). I use this to create a fairly nice looking Navisworks model. With the void, now my model has a void. It seems to me that there should be a way to have a subassembly that can target both the back of curb profile and the edge of gutter simultaneously. I've tried with the standard subassembly "UrbanReplaceCurbGutter2" but with no luck. Any successful modeling a curb height transition within their corridor?
AutoCAD Civil 3D :: Curb Drop In Corridor
Jan 9, 2013I have a corridor with multipule intersections. I modeled the primary road straight through the intersections. Created ETW alignments and profiles to target in the intersections. Most intersections did not require this but one complex one did. All other quadrents in this intersection worked out except for this one (see attached). In this intersection the primary road alignment leaves the centerline of the road and transitions to a lane. I can't seem to figure out what this one quadrant is trying to target?
View 4 Replies View RelatedAutoCAD Civil 3D :: Corridor Back Of Curb
Feb 12, 2013I am new to corridors and am having some trouble with this. I have an assembly that has a paved roadway, 2' curb and gutter and a sidewalk. Along the road the curb varies to allow for on street parking. I have the front and back of sidewalk attached to an alignment, so it is exactly where it needs to be. I have an alignment that my EOP follows as well, and that seems to be ok. The problem is the back fo curb in the corridor. Instead of being 2' offset from the EOP, it is shifted 2' perpendicular to the baseline. Please take a look at the attached picture.
I think I can get it done by making each parking "bump out" it's own region using the EOP alignment, but that will take a lot more time and make my file a whole lot bigger. Being a corridor rookie, I am hoping I am just missing something.
I'm using Civil 3D 2013.
AutoCAD Civil 3D :: Curb Box Depending On Casting Number
Nov 25, 2013I assume the curb box is included (or not) depending on the casting number? How is something like 3067 handled, which comes with and without a curb box?
View 2 Replies View RelatedAutoCAD Civil 3D :: Getting An Assembly To Follow A Top Of Curb Profile
Nov 6, 2012I am trying to get a street assembly to follow a top of curb profile. The profile is at the face of curb. The centerline of the street is my assembly target profile and alignment. I do not want to create an alignment for the curb. The curb profile is based on the centerline alignment. I can't figure out how to get a link that will track the curb profile at the face of curb.
View 4 Replies View RelatedAutoCAD Civil 3D :: 3 Line Profile Curb Transitions
Jul 6, 2012we use three line road profiles. If there is a bus pullout or lane transition we show the curb profile based on centerline stationing. I'm able to generate a the corridor using a transition lane assembly from centerline and targeting a widened offset alignment or just a feature line. I can import the corridor curb feature line into a profile which would be a perfect solution, but it is all truncated. (i.e. no vertical curves) I can create a profile of the offset alignment, but the stationing doesn't match centerline.
How can I either generate a non trunidicated profile from the corridor for my curb profiles? How can create a design profile of a transition/pullout curb line that I can target and plot against centerline stationing?
AutoCAD Civil 3D :: Profile Labels For Curb - Rounding Error
Apr 4, 2012We sre doing 3 line profiles for a road and the left and right curb should be .13' lower than the centerline elevation. In many cases we are getting .14' or sometimes more or less. We tried resampling the cooridor with a tighter interval but still the same results.
View 9 Replies View RelatedAutoCAD Civil 3D :: Moving Curb Grades In Profile View?
Aug 20, 2012I am having a problem with moving my profile grades. I go to Utilities under Corridors and create a profile for the left and right curb. They show up in my Alignment Profile, but when I click on one to move it, it disappears. When I type regen, it shows back up. I am trying to set my crossection grades in my Multiple Section Views. I first create my Profile from Surface, then do a proposed centerline grade by Draw tangents with curves. I create the corridor, put in the regions, go to corridor properties and pick the right and left corridor lines I have created. Then I set the existing surface and attach it to my profile. I create the sample lines and the Multi Section Views. Where am I screwing up?
View 4 Replies View RelatedAutoCAD Civil 3D :: Grading Objects From Curb Lines - Linking?
Oct 12, 2011I have been creating grading objects from my curb lines, assigning grades using the editor, then offsetting that line for the BACK of curb, and using the raise-lower command to raise the curb line height. If I edit the original face of curb line (gutter grade) then I go back and redo the process. Is there any way to intelligently link these two lines so that if one gets edited C3D knows the other is 0.5 feet higher (or lower) than its neighbor?
View 9 Replies View RelatedAutoCAD Civil 3D :: How To Shut Off Rendering For Pavement / Curb Assemblies Autodesk Provides
Jul 18, 2012How to shut off the rendering for the pavement & curb assemblies autodesk provides?Otherwise they turn into black blobs and use a lot of ink when they are plotted.
View 6 Replies View RelatedAutoCAD Civil 3D :: Surface From Grade
Jul 28, 2013I'm working on a grading plan which excavates down from just outside the waterline of an existing pond. When I create a surface from the grading, it looks like a whole bunch of strange break lines have been added, messing up the surface. I thought it might be the mid ordinate distance but changing that doesn't seem to fix it it. Interestingly, when I grade from the original waterline, this doesn't seem to happen.
Here is my workflow, a picture of the result is shown below.
1. Turned the current waterline into a feature line.
2. Created new feature line by offsetting outside that feature line by 3.16 ft.
3. From new feature line, grade down 10 feet at 3:1
4. Create new surface using grading.
The grading lines (shown in white) look correct. But when I create the surface (green and yellow), it is all messed up.
AutoCAD Civil 3D :: Create Grade From A Corridor
Aug 27, 2013I want to create a grade (without object grade) using a corridor. This is my assembly:
This only contains the sub assembly "DaylightBench" in the side right.
I have the alignment and profile. I have created the corridor.
red line= alignment
green line= feature line (code Intersecction) converted to polyline.
pink surface= surface (code TOP).
I have added a boundary for surface of type "add from polygon" and I have selected the closed polyline(green line).
However, the boundary seems doesn´t work.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
AutoCAD Civil 3D :: Grade Break Increments
Sep 13, 2013I have a profile set up with a surface an alignment and a Water Main. I would like to place grade breaks (Using Profile labels) every 100' along the surface however the increment field isn't available for grade breaks. Weeding doesn't work because it needs to be exactly every 100' I was thinking of creating an expression for it however I still haven't reached that level of expertise.
View 5 Replies View RelatedAutoCAD Civil 3D :: Surfaceslope Arrows With % Grade
Jul 2, 2012I noticed a post a few years ago mentioning this function wasn't available then. Is it still not available? Is there a routine? A lisp? An expression that I can make to put a slope arrow inside every tin in my surface with a % grade?
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile Grade Markers
May 22, 2013Why do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
AutoCAD Civil 3D :: Point Label Size Change When Label Is Moved?
May 8, 2012The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedAutoCAD Civil 3D :: Changing Profile Line Label Style Causes Label String To Revert To Default
Sep 6, 2012C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
AutoCAD Civil 3D :: Edit Label Text In Parcel Label
Jan 3, 2013Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedAutoCAD Civil 3D :: Profile Grade Break Removal
Jan 6, 2013I was laying out a vertical curve in the roadway profile. I have a vertical curve of 100' in length, however immediately after that it shows a grade break. I do not want this grade break in my profile, I simply want a vertical curve with two grades on the left and right sides. How can I get 2009 C3D to remove the grade breaks? It would be very uncomfortable for someone to have to drive over these in the real world.
View 1 Replies View RelatedAutoCAD Civil 3D :: Show Slope / Grade On Surface?
Jun 27, 2013i was wondering is it possible to show slopes or grades on my surfaces , or corridors IN PLAN VIEW ?
View 8 Replies View RelatedAutoCAD Civil 3D :: Corridor Line Follows Existing Grade
Jan 11, 2013i have a corridor. the corridor feature line that is supposed to hit the proposed centerline is following my existing grade instead of where the profile is. in other words, the corridor line i need at the centerline when i do "feature lines from corridor" is following my existing grade instead of the top of my road. did i accid. change something? i need it to follow the top centerline of my road. the red arrow is the line i need at the top centerline.
View 3 Replies View Related