AutoCad :: How To Break A Random Line Into Thirds Or Fourths
Oct 2, 2012I want to break a line into thirds or fourths.
View 5 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Remove Feature Line Used As Break Line When Creating Surface
Dec 11, 2012I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
AutoCAD Map 3D :: Line Break In Text Label Doesn't Center 2nd Line Like It Does First
Feb 22, 2012I have an FDO layer which I am styling like so:
Concat ( FDO_LAYER1, Concat ( '
', FDO_LAYER2 ) )
This layer is styled so that all text is centered. In this case, FDO_LAYER2 is having it's text left aligned. I'm pretty sure this is due to the method I am using for a new line. Is there something else I can use to break the line and maintain the center styling?
Using a second point for FDO_LAYER2 is not an option.
AutoCad :: How To Not Make Curved Line Break Into Straight Line Segments
Jun 27, 2012I draw a curved line and would like it to remain as a curved line even after saving the file. However everytime after saving, and opening the file again, the curve breaks into many line segments, which is not what I want! I want the curved line that I draw to remain as a curved line even after saving and opening. How do I do that? I am using autocad2010.
I use the ARC command to draw a couple of lines, they look okay here. But after I saved it, and re-open it again, what previously appeared as curved lines changed in their appearance to polyline segments.
AutoCAD Inventor :: How To Break Diameter Line Into Horizontal Line At End
Apr 12, 2013how to break diameter line into horizontal line at the end ?... there's no such option in editor style (I want to have 2 arrows for this diameter, not one as it is in editor options)
View 2 Replies View RelatedAutoCad :: How To Create A Break Line And Or Jog Line In A Section
Sep 5, 2011How do we do a break and or jog line in a section so we make things shorter? I did find the DIMJOGLINE command and that will be great for the dimensions but what about the other stuff, do we have to do that with a block or draw the thing, if that's the case what are you doing to handle this?
View 5 Replies View RelatedAutoCAD .NET :: Break Line With Known Distance
Oct 6, 2011I have to break a line/polyline with a known distance around a point of the line. I was thinking of creating a circle with a specific radius and then trim the line inside the circle, then delete the circle but I could not find how to use trim in .net.
View 1 Replies View RelatedAutoCad :: Break Line Without Leaving Gap?
Jan 18, 2013How can I break a line without leaving a gap?
View 4 Replies View RelatedAutoCAD 2013 :: How To Break Each Line At An Intersection
Oct 22, 2013In Regis you copuld use the "clean"command to break each line at an intersection. What command or function must I use in AutoCad 2013? I wish to break the lines at each intersection in order to import the lines into a GIS application. I am currently drawing in 2D.
View 4 Replies View RelatedAutoCad :: Command To Break A Line Or Dimension?
Jan 22, 2013Is there a command to break a line or dimension, to show that not all of the line is displayed or where the length is not important or undefined?
View 4 Replies View RelatedAutoCad :: Break Multiple Line At One Time?
Feb 7, 2013Would like to know if Autocad has any thing that i could use to break multiple line at one time with out going to each line and using the break command. Using Autocad 13.
View 3 Replies View RelatedAutoCad :: Break Line When Inserting Block?
Jan 25, 2007Is there a way to set up autocad(2004) so that when I insert a block, the block then automatically breaks the line I am inserting it on. My drawing's are mostly electrical schematics so the line I am refering to is the circuit and my blocks are components. At the moment I insert my block and I have to use the command 'break'. I know this does not take up a lot of time but I am always looking for ways to speed up!
View 8 Replies View RelatedAutoCad :: Break A Line But For Circles And Ellipses
Aug 15, 2011I would like to ask a question on “Break at point”.
It is possible to break a line but for circles and ellipses, my attempts resulted in no break at all (see attached picture).
Does “Break at point” support circles and ellipses? If you have a circle and you would like to make it a ¾ circle arc, or any arbitrary angle, how do you do that?
brk.png
AutoCAD Architecture :: Add A Break Line For Stairs?
Mar 9, 2012How do you add a break line for stairs? In windows it is under 'express tools' but I can't find it in the mac version.
View 1 Replies View RelatedAutoCAD Civil 3D :: Break A Closed Feature Line
Jul 28, 2011I often use feature lines for parking lots and ponds. They're great when they work, but they drive me NUTS when they don't - which is a lot of the time. For parking lots and ponds, my feature lines usually close back on themselves. That's when I have trouble breaking the feature line. When I use BREAKFEATURE, I choose two points and this should, in theory, leave a gap in the feature line between those two points. That's not what happens. I end up with a huge gap between the first point I picked and a vertex point 5 or 6 vertices away. It doesn't matter where I pick the breaking points.
I've also tried TRIMFEATURES. I draw lines across the feature line where I would have chosen the breaking points. But the portion that I want to remove is the portion that always remains. It doesn't matter where I select the feature line to be trimmed (inside or outside of the cutting edges).
I think there may something wrong with the feature line itself. Sometimes, if I erase the original and draw a new one, it will trim just fine. But that's such a headache, and it doesn't always work. If I knew what was causing the feature lines to go squirrely, I would aviod it. Unfortunately, it seems like breathing the wrong way can screw up a feature line.
AutoCAD Inventor :: How To Use One Line Break In Same Command On ILogic
Oct 31, 2012How can I use one "line break" in the same command on iLogic ?
For a simple doubt, a simple sample :
MessageBox.Show("Message blabla blablablabla blablablabla", "Title")
In this case, how could i divide the message in 3 lines in the messagebox ?
actually this would work for me in other case too, creating a text with more than one line, instead of creat many text boxes.
IV 2013
AutoCAD 2010 :: Break / Cut Line Which Is In Reference File?
Apr 10, 2013Want to break/cut a line which is in reference file.
I know MicroStation has this function called "mask". Does AutoCAD has similar?
AutoCAD 2013 :: How To Break A Line Or Polyline Down To Equal Segments
Feb 5, 2013how to break a line or polyline down to equal segments.
View 4 Replies View RelatedAutoCAD Inventor :: Detail View Break Line Weight
Aug 31, 2012What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedAutoCAD Civil 3D :: Line Break In Survey Point Description
Mar 27, 2013Is there a way to have a multiline point description? For example, in the raw description, i wrote out the text, but I would like to return a line for the parentheses.
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
AutoCAD Civil 3D :: How To Put Return / Break To Another Text Line In A Label
Feb 27, 2013How to put a (Return) or Break to another text line in a label? Usually it is one big long label on one line.
View 4 Replies View RelatedAutoCAD Civil 3D :: Adding Feature Lines To Surface As Break Line
Jan 31, 2012When adding break lines to a surface, a dialog box like appears that asks for weeding factors and supplementing factors. What I would like to know is, how can I change the defaults to reflect the settings needed on my project.
I am using C3D 2009.
AutoCad 2D :: How To Break Multiple Lines At Single Point Without A Gap Along A Perpendicular Line
Apr 5, 2011Is it possible to break multiple lines at a single point without a gap along a perpendicular line??
View 6 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Break To Break At Point Command
Mar 19, 2010Is it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.
Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.
To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.
Photoshop :: Add Line Break In Configurator Tool
Apr 23, 2009Just started using the Configurator,My first attempts at tool tips often get lengthy. If the width of the panel is not wide enough, resulting tips get truncated/munged.Is there a way to insert line breaks in tips so that they can be seen in total on a "skinny" panel?
View 1 Replies View RelatedPhotoshop :: Can't Make A Soft Line Break In...
Jan 22, 2009I used to be able to do a "soft" line break in photoshop by hitting "shift + enter." it's not working anymore-- it's only giving me a "hard return".
are we no longer able to do soft breaks in photoshop anymore?
Photoshop :: Chinese Language Line Break Rules
Jun 19, 2012I'm using an international English version (I think) of Adobe Photoshop CS6, and I'm making a catalog that has Chinese type in it. I've encountered a problem with the paragraphing in that new lines often begin with periods or commas, and lines sometimes end with open brackets.
Is there a way to set line break rules for Chinese fonts? I'm using an OpenType font (Adobe Heiti), but I can't find the options to change the line break rules.
Revit :: Break Line Mask Region In 2013
Sep 4, 2012I have some sections and am using the break line with a masked region but in Revit 2013 the masked region only works in the Wireframe Graphics display option. It does not work in the Hidden Line display. It was fine in 2012
View 7 Replies View RelatedRevit :: Break Callout Boundary Similar To Section Line
Jan 7, 2011Is there a way to break the Callout Boundary similar to the Section Line in Revit Arch 2011 ?
View 9 Replies View RelatedIllustrator :: Put Line Break In Text In The Data Box When Creating Chart?
Feb 5, 2014Can you put line break in text in the data box when creating a chart.
i.e. if you have a bar chart with text underneath each bar, can you break it when you’re entering it instead of manually afterwards
CorelDRAW Graphics Suite X6 :: X6.4 - Line Break And Text Background Color
Nov 12, 2013when I switch tab once at the end of the line sits the line break outside of the paragraph text frame..The background color so then runs out of the frame.A wish at left line intent (or right) it should be possible to fill these also with the background color and a function that assigns every second line is a background color..
View 2 Replies View Related