AutoCAD Civil 3D :: Export Profile Chainage And Level As Text To Import Into Hydrology Software
Nov 18, 2013
I need cross section information of a creek for a Hydrology program (DRAINS in Australia) and need to extract this from a surface I have created in Civil 3D. I require the Chainage and Level for a profile which represents the creek cross section at several specific locations. The information is essentially the data bands in a Profile which I can create, however I cannot see how to obtain this information in a form I can use.
the format of the data can be copy and pasted into Excel from which I can directly import the information into the software.
View 2 Replies
ADVERTISEMENT
Apr 11, 2013
I've drawn a profile and would like to show the elevations of each surface selected in different bands. I've set up the bands easily enough though when they display on the section I've got two levels either side of the chainage line one with 0.01 precision and one with 0.001 precision - I only want to display one. I've tried fiddling with the Profile View Properties but don't seem to be getting very far..
View 3 Replies
View Related
Mar 18, 2011
Any lisp programme for creating a line profile and chainage. I have attached a sample drawing. The blocks on the line have elevation and lines are drawn from the datum .If i manually draw it will take too much time.
View 9 Replies
View Related
Jan 6, 2014
How can i create a profile using level data obtained from dumpy level with civil3D
View 3 Replies
View Related
Mar 8, 2013
In my profile view I have existing and proposed levels in m.
The level difference is also in m but I'd like it to be scaled to show mm, as this is quicker to read on site.
Is there some way to edit the equation and multiply by 1000?
View 6 Replies
View Related
Nov 11, 2013
I am in case to model a stormwater network contain ditches with irregular sections, open channels and closed pipes in SSA. I do not have access to IDF curves for the Project area. We got a weather station in site which is giving us continuous data from last 3 months till now. At this stage we just decided to use certain Rainfall intensity (mm/hr).
We got some check points to check the turbidity. What I need to know after analyse is i.e what is the flow at these points at 6:00 pm if we experience the rainfall from 3:00 pm to 4:00 pm with 20 mm/hr rainfall intensity.
So my concerns are with these available basic data, which method is suitable? and as long as we approach more valued data from in site weather station then which method will be the best. If i want to input time of concentration manually for each subbasin then how can i input TC of pipes or channels in SSA? URL....
where MATT said: "SSA does not calculate the Standard-Step method. The Rational Methods (including modified, and DeKalb) all compute the runoff to the inlet or junction. As soon as runoff enters the system, continuity and momentum calculations take over. SInce you are using Steady State Qin = Qout, so no routing occurs on pipes."
how do i understand the flow in certain points i.e 2 hrs after the rainfall is finished if I can not define TC for pipes or channels?
View 1 Replies
View Related
Oct 4, 2013
I am struggling to import .stm file into a blank civil3d file. it does import whith correct sizes and elevation. the issue is rim level of structures are the same as SSA file but it will make 2 meter sump depth to stuctures, thus structures invert levels are not correct. i just made a sump depth rule for structure and applied to some of them. it will correct it but as i have more than 1000 manholes in network it will be a major job to apply the rule. i know "apply rule" command will work a lot but i would like to know why it is importing whit wrong properties?
View 3 Replies
View Related
May 23, 2012
Is there a way in Revit to export or import settings much like a profile in AutoCAD and how I set up the icon to point at that profile when the program opens? I would like to know how be able to customize where the program looks for the families and other items over the network, so all users can see the same thing, in options.
Attached is the properties of the AutoCAD icon. The Target is set-up to point to the "AutoCAD Architecture (US Imperial)" profile. I would like to do something similar in the Revit icon.
View 1 Replies
View Related
Sep 7, 2013
How do i make my chainages show as 420.000 rather than 4+20.00.I.e I need to take the plus sign out (we never use them - only whole distances) and I need it in 3 decimal places.
View 3 Replies
View Related
May 21, 2013
Is there a way to change the format of alignment chainage from 1501+120 to this format 1501km120?
View 3 Replies
View Related
Apr 3, 2012
Is it possible to generate alignment chainages at irregular (not-constant) intervals?
View 2 Replies
View Related
May 8, 2012
We are using Civil 3d 2012 with Topcon Data Collectors. Topcon will not read a profile created by using "create surface profile" command but it will read a profile using "Profile Creation Tools" command. We are not sure if this a civil 3D, Topcon or a LandXML issue?
View 1 Replies
View Related
Aug 8, 2013
We are working together with another firm here in town. The are doing the road and we are doing the utilities. They have established the alignments and profiles. When I import them all the data comes in. For whatever reason I do not have their profile views so I create my own profile view and put their profiles in them.
When they send an updated .xml file of all the alignments and profiles, they import okay but my profile views disappear. I assume it's because in their .xml file that I import, there are no profile view defined.
Is there an options when you export and alignment to an .xml file that you can include the profile views with it as well? This way when I import them I would get them.
View 8 Replies
View Related
Jan 10, 2013
So I have been getting a fatal error "INTERNAL ERROR: !dbobji.cpp@8743: eNotOpenForWrite" when I try to export to 2010 CAD.
I have worked out that it happens when pipes are displayed in the profile view.
View 7 Replies
View Related
Aug 12, 2013
I get this message FDO provider 'OSGeo.SHP.3.8' everytime I try to import polylines into shapefile format.
View 2 Replies
View Related
Sep 7, 2011
Within the UKIE Country Kit there is a lsp that exports/imports Surface elevation Analysis data (attached lisp file)
Is it possible to be modified so that a Slope analysis is exported/imported and how easy/difficult it is to do (or even make the alterations themselves!).
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 5 Replies
View Related
Jun 20, 2008
Notice that the import / export Layer filters is missing in 2009?
View 9 Replies
View Related
Jul 9, 2012
I have been trying to export my annotation settings using the profile function on Autocad 2010. I can't get it to work, and I don't think this is the best way to achieve my goal. I've made a template file, but I don't know how to import it.
My goal is to, as quickly as possible, give 8 drawings the same annotation settings.
View 5 Replies
View Related
Apr 13, 2012
I recently made a custom Tool Palette that contains all of our most commonly used Assemblies in our office on my PC. I then exported the Paleette to a location on our network and tried to import it onto another workstation. The Palette imported correctly and all of the assemblies are visible. However, when an assembly is attempted to be inserted into a drawing nothing is inserted.
Upon insertion the properties menu box shows up indicating that it is closed or locked..."do you wish to continue".
Is there a step that I am missing on importing or exporting of assemblies or Palettes?
View 1 Replies
View Related
Nov 8, 2013
I'm trying to import some label and table styles from another drawing and can't seem to do it. I followed the tutorial offered here until I got to the "Manag" ribbon in my Civil 3D and found that the Styles "import Export" option is not there.
View 9 Replies
View Related
Oct 1, 2012
When I create a profile, then explode it, none of the text or lines are bylayer. My company wants everything to be bylayer. I can't figure out which style controls the profile to make everything bylayer after it is exploded.
View 2 Replies
View Related
Mar 15, 2013
When making a profile the actual scale of the profile does not match the vertical text. The scale is 1"=40' hor and 1"=4' ver with a 10:1 exageration.
See sketch below
View 1 Replies
View Related
Feb 4, 2013
So I am trying to edit certain text features dealing with stationing in one profile view (for example I don't want any stationing on the top of the profile view). How do I do this so it will just affect the noted profile view and not delete the stationing on all of my profile views in this drawing.
View 4 Replies
View Related
Nov 20, 2012
I am trying to adjust the profile view titles. The titles and and scales are chained together to be the same font and size. Is there any EASY way to have the titles large and the scales small?
View 2 Replies
View Related
Jul 2, 2013
Is there a way to make the Profile band title a specific text style? At the moment it seems that when I access
Profile Properties>Pick Band Style>Profile Data Bans Style>Compose Label>Label style composer
I go to the Contents (under Text) and edit it to bring up the Text component Editor.
In this if I go to the Format Tab the text style is set to annotative, however under that it says font style as an overide. How do I remove the override and set the style of the text to the text style. And how do i change the text style.
View 3 Replies
View Related
Jul 12, 2012
I was wondering how I can set my Elevation Text and Profile Major Gridlines at different intervals? It seems like there stuck to one another.
For example, I want my Major Gridlines at every 1.0m but show elevation at every 5.0m.
I tried 'splitting' the profile view with a hacked up style but it seems to be messing up my pipes. Is there a way I can make a vertical band of some sort?
Civil 3D 2011
Win 7
Intel Xeon 3.20GHz
15Gb Ram
Quadro 600
View 4 Replies
View Related
May 10, 2012
For composing a profile label, I can't find the option for Geometry Point Text, which would use our abbreviations under the drawing settings. It is available for alignments but not profiles. Currently have it text compenent being labeled with PVC and PVT, but I had typed that in.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 1 Replies
View Related
May 15, 2012
Using Civil 3D 2012, is there a way to import/export a list of metric annotation scales for use in another drawing?
View 4 Replies
View Related
Sep 23, 2010
We are using Civil 3D 2010, Version 4.1 and it is being used on both WinXP and Win7.
This is an issue that has been coming up at different times with profile views and them shifting when viewed from our viewports in our layout tab. It looks correct in the model space. But it shifts to the right 10' in the layout tab. We have 7 tabs in this drawing. I have looked through all of the profile view settings and it does not seem like any of these are the issue. I created a new viewport in the same tab and received the same shift to the right. I then created a new tab in the same drawing (not copied from the one that has the issue), created a new viewport, and the shift is not there. The PSLTSCALE, MSLTSCALE, and LTSCALE are all set to 1 in all of th tabs.
Woudl there be a layout tab setting that is causing this? This is happening on all of our machines with this drawing so I know it is not a specific user/machine issue. I have attached a .pdf showing the three cases described above if that were to provide any additional insight.
View 9 Replies
View Related
Oct 16, 2012
Suppose you have an existing structure that you are going to tie into with a proposed pipe.
We label existing structures with smaller text and a different color (as opposed to proposed labels)
Is there any way to label the structure where the one single proposed pipe text is a larger text size with a different color, as shown here?
View 2 Replies
View Related
Mar 26, 2008
Is there a way to import or export a text file into and out of Photoshop, via text layers?
I'm aware of the being able to manually copy and paste, however I'd like to automate/batch this process.
View 11 Replies
View Related
