I am trying to adjust the profile view titles. The titles and and scales are chained together to be the same font and size. Is there any EASY way to have the titles large and the scales small?
View 2 RepliesIs there a way to get the vertical scale property of a profile view and not use COM?
View 4 Replies View RelatedIs there a way to make the Profile band title a specific text style? At the moment it seems that when I access
Profile Properties>Pick Band Style>Profile Data Bans Style>Compose Label>Label style composer
I go to the Contents (under Text) and edit it to bring up the Text component Editor.
In this if I go to the Format Tab the text style is set to annotative, however under that it says font style as an overide. How do I remove the override and set the style of the text to the text style. And how do i change the text style.
I am working on setting up exagerated (10X) section views. I would like to show the horizontal and vertical scale below each section. I have used the code below in the Axis Title Text. The horizontal scale displays correctly (taken from the overall drawing scale)
How would i edit the vertical code below to show the vertical scale 10 times smaller?
SCALE: HORIZONTAL = 1:<[Drawing Scale(P0|RN|AP|GC|UN|OF)]>
VERTERTICAL = 1:<[Drawing Scale(P0|RN|AP|GC|UN|OF)]>
So I am trying to edit certain text features dealing with stationing in one profile view (for example I don't want any stationing on the top of the profile view). How do I do this so it will just affect the noted profile view and not delete the stationing on all of my profile views in this drawing.
View 4 Replies View RelatedIn civil 3d 2014 i need 2 sections (and a profile) all with different scales in the viewports (layout). Sizing of the labels and bands is all fine, only a text item is not updated. I need to display the scale (the number) for the current section (or profile), it works but the scale shown is always the scale from the model and not the scale from the viewport, so the different scaled sections all have the same text in the label, e.g 1:200, even if they are correctly scaled to different factors in defferent viewports.
View 5 Replies View RelatedI tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself. ?
Civil 3D 2012
I am trying to get the scale of the base view in my titleblock. I have searched, the conclusion that as of Inventor 2012, this still can not be accomplished without add-ons?
View 9 Replies View Relatedhow to create a text field, in an IDW, that will link (look) at the scale factor of a "Base View" in the same IDW? I am trying to create a text field on my title block that will identify the "Base View" scale automatically.
View 9 Replies View RelatedHow to import scale of view into a title block?
View 1 Replies View RelatedI'm attempting to create a profile view and then modify the label by overriding the text components. Unfortunately the profile view bands don't populate the labels until after my command is complete making it not possible to modify them in one command. Is there a way to update the band to have it show the labels?
Civil 3D 2013
I have a view title where I want to show Full scale and half scale on the same view title. Please see attached .rfa file.
Is there a way to have a label return a half size automatically in an effort to have only one view title. Otherwise our current work around is to make each view title for each scale and create a viewport for each scale in our template. I have heard that the labels are hardcoded and cannot be changed.
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedI try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
A tabular data sheet for profiles could be very interesting.
Civil 3D (2013)
I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport. The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into. But when I switch from model space to paper space in my layout sheet (the file the profile dwg is referenced into) the profile moves to the wrong station within my profile view in paper space.
The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.
The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.
I am a C3D newbie who used ground survey points (Serrano_EG_surface) that generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then into individual CL alignments. The first alignment ,which has its left and right offsets do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.
1. Are the ground survey points good enough so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a preliminary drawing for environmental permitting. ?
2. When I check the object browser, the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.
3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).
4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.
I would like to show the title boundary of our site on a profile in a way that is dynamic. Same idea than on cross sections, where you can create an alignment running along the title boundary and then show a block where the boundary lies on each cross section. I know I could project a cogo point where the alignment intersects the boundary.
This method is not perfect because, if the alignment changes and, therefore, the intersection point with the boundary changes too, the cogo point won't follow the alignment, staying at its original location. Hence, I'll have to update it manually. I tried using a feature line, but it seems I cannot show a marker only where it intersects the alignment.
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
I was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies View RelatedIs there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies View RelatedI'm having an issue when trying to create the profile sheets on my first Civil 3D project. I'm supposed to use a horizontal scale of 1/2000 and a vertical scale of 1/400. When producing the sheets, I obtain 1/500 H and 1/100 V.
View 2 Replies View RelatedWhen I make profile sheets the vertical scale (text) if off by 4' (below). I checked all the settings and they appear to be correct. When I make a profile the scale is correctly shown.
View 1 Replies View RelatedAny way to get a scale bar/title block text to reflect plotting at half size?
We use the common (24x36) sheet size for all projects, but when plotting we send out half size (12x18) as well. This means the scale bar reading 1"=40' is no longer correct. It should read 1"=20'. I would like to automate this.
I imported Google earth surface (at eye alt 600m) to civil 3d 2012 and created an alignment of length 181m.
When I exported same alignment to Google earth , it showed the length as 190m ( the difference increases with increase in length of alignment) And also the profile view of the alignment in the Civil D & Google earth varies.
C3D 2012..Have a profile I'd like to have the PC, PT shown. (No Problem)But in doing so it also puts the PI'S of each of these curves in the profile view.
Is there a way to turn off the PI's and leave the PC's and PT's on?
I have a dwg I need the viewframes to be 20 scale
Right now I just testing using the default templates, So I'm guessing it has to do with the templates I'm choosing.
C3D 2010