AutoCAD Civil 3D :: Import / Export List Of Metric Annotation Scales For Use In Another Drawing?
May 15, 2012Using Civil 3D 2012, is there a way to import/export a list of metric annotation scales for use in another drawing?
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Import Scales From Drawing?
Oct 21, 2013is it possible to import scales from one drawing to another?
i get many drawings every day from other people and i want to import my own scales from my own templete.
i thought to copy the objects to my own templates but i will loose the layouts from the originals. i will heve then again to import the layouts...
AutoCAD Civil 3D :: Metric Cross Section Scales
May 31, 2013C3D 2012 Sp3
I have a Dref alignment, samples lines, and an Xref'd corridor in a drawing. This drawing represents a base file for cross sections. The drawing scale is set to 1:10. I want my cross sections to be 10 horz. and 5 vert. I create the sections views in ths drawing, with sheet production on (A0 sized sheet) and they come in perfectly in model space. I then use the production tools and create the section sheets. Here s the problem: The viewport on the newly created section sheets has to be set to 1:100, not 1:10, in order for the sections to plot to the correct scale. Is the viewport ratio of 10 times smaller then the parent drawing (1:10) the correct way to create the sheets? I thought that the viewport scale should be equal to the parent drawing model space scale (1:10). My border in the template layout is sized in mm (A0).
AutoCAD 2010 :: Duplicate Annotation Scales HARD-CODED In Drawing File
Apr 30, 2013I have determined that an AutoCAD drawing has the unfortunate ability to have Annotation Scales "hard coded", meaning they CANNOT be removed from the drawing.
Let me explain....
In a detail drawing file (i.e. my master drawing file where I keep all of our standard details), I was getting duplicate Annotation Scales. I would try to use the SCALELISTEDIT command to try and delete the anno scales not being used, but it would appear they WERE being used. (and resetting the anno scales didn't work either)
I was using a combination of tricks to determine WHICH annotation objects were using the duplicate anno scales. I would set ANNOALLVISIBLE to 0 and set the CANNOSCALE to the duplicate anno style to see where they were being used with no luck
I would then use the QSELECT command to group select each type of annotation object that were annotative, and check to see if they were using the duplicate scales. Again, no luck
THEN, I decided to cut-n-paste each detail one-at-a-time from my master drawing file to a new BLANK drawing with only one annotation scale in it (i.e. 1:1). I would paste a detail, and then enter the SCALELISTEDIT command to see which anno scales "came along for the ride". I pasted a particular detail that carried over the duplicate anno scales, but when I checked all of the annotation objects for the duplicate anno scales - NOTHING! I then deleted that particular detail, purged it, and then I was able to delete the duplicate anno scales. But no matter what I did to try and fix that detail (i.e. wblock, cut-n-paste, save-down, etc) the duplicate anno scales simply will NOT be allowed to be deleted even though i cannot find any objects associated with them.
AutoCAD Visual LISP / AutoLISP :: Add Scales To List Scales?
Oct 6, 2013create a code to add scales to the scale’s list?
I just want to have the necessary scales, so don’t want to add to the template.
The command function is basically to allow me type the value of the scale and based on that, adjust the properties of the scale. (Name appearing in scale list - Paper Milimeters - Drawing Meters)
Example:
>Command line: setscale
>type the value of the scale to create: 50
set 1:50 to default
AutoCAD 2010 :: How To Import / Export Text Annotation Settings
Jul 9, 2012I have been trying to export my annotation settings using the profile function on Autocad 2010. I can't get it to work, and I don't think this is the best way to achieve my goal. I've made a template file, but I don't know how to import it.
My goal is to, as quickly as possible, give 8 drawings the same annotation settings.
AutoCad :: Too Many Annotation Scales In XRefs?
Oct 19, 2009For a project we are currently working on all files are stored on projectwise, all xrefs run through projectwise, so essentially whatever changes are made are immediately avaliable to everyone working on the job. This is great and all, but, one of the companies dwgs have an average of 11,000 + annotation scales. And those dwgs are referenced into ours. Usually in a situation like this we would just get rid of the annotation scales in the original, but since its run through projectwise every time they open and close one of these dwgs it over rides any changes we made (like getting rid of the annotation scales) We dont use annotation scales and i never have, is 11,000+ alot of annotation scales or is that normal? half the time i open the dwgs with these xrefed in it crashes autocad or takes forever.
View 7 Replies View RelatedAutoCad :: Large Number Of Annotation Scales?
Jun 15, 2012Any way, through acad.lsp or similar, to check "Yes" and "Always perform my current choice" for all users in the dialog below? I just don't know if this is a system variable or something else that is easy to set.
View 2 Replies View RelatedAutoCad 2D :: Merge Annotation Scales To Meters
Nov 8, 2012I have some annotation scale in my drawing but over the course of the last year many have come from different places.
We use Annotation scales called Meters 1:1000 but another company we work with use 1:1000m. Is there a way to merge these two annotation scale to Meters1:1000?
AutoCad 2D :: Txt Orientation Matched - Without Annotation Scales
Mar 14, 2013How to make txt orientation match layout without also having annotative scales. I need the txt to be a fixed size according to other drawing objects in different viewports -with different scales - and with different orientation.
View 3 Replies View RelatedAutoCAD Civil 3D :: Editing Drawing Scales
Jun 14, 2013I am working in a drawing that had all archetectual scales. I Need to insert scales like 1"=30' and so on. Usually when i go to this menu i can simply add them, but in this drawing they arent there. I started this drawing using the relitivly blank template ACAD.dwt because i am trying to build a company template and did not want any trash.
How does autocad chooses wich scales to show. In drawing setting it is set to US Survey foot.
The link talks about the issue, but i really do not understand the results. [URL] ......
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD 2010 :: ATTYNC Command In Different Annotation Scales?
Feb 13, 2012We are using in the office annotative blocks with text attributes.
When changing the display annotation scale, the attributes go normally, at the beginning, all back to 0,0,0 point; what we solve by using ATTSYNC command, and works fine; they go back to correct size and location.
But, for some reason in some computers, when closing and saving the file, and opening it again next day, all the attributes, at the same display scale than the day before, are all wrong size and location.
I have tried to uninstall the whole program and install it again from zero, and the same problem persists.What can I do?
AutoCad :: 2012 Annotation Scales Not Fully Listed?
Sep 29, 2011I can not figure out why my annotation scale list has very few scale listings to choose form. The only scales that are listed are ratio (i.e. 1:1), i seem to be missing feet and inches (i.e. 1/4" = 1'). Is there a way to turn the rest of the scales on?
View 3 Replies View RelatedAutoCAD LT :: How To Turn On Large Number Of Annotation Scales Dialog
Apr 27, 2012If I accidently turned it off and can not find it in the Hiddeen Messages Settings dialog, is there a variable or registry key or other trick to turn it on again?
Would be interested in a variable for the "missing shx files" dialog as well.
AutoCAD Civil 3D :: Convert Metric Polylines To Metric Feature Lines Error
May 9, 2013When converting metric 3d polylines to feature lines with units set on metric, drawing properties metric and using the australia/new zealand settings and command "create featureline from objects", for some reason the resulting 3d featurelines end up imperial?
View 2 Replies View RelatedAutoCAD Civil 3D :: XREF Drawing For Profiles And Annotation Text
May 7, 2013I am trying to XREF my C3D Design file that has my profiles and sections in it into a drawing with a title block and viewport. Everything is fine in Model Space...but when I create the viewport in Paper Space none of the annotative text of the profile/section shows up...or is microscopic.
View 8 Replies View RelatedAutoCAD 2010 :: Modify DEFAULT SCALE LIST To Show Metric Scale List In Imperial Template
May 2, 2012Is there a way to modify the DEFAULT SCALE LIST to show a metric scale list in an imperial template? I mean, I start a drawing using the imperial template, but i want to use the standard metric scales on paper space. on previous versions the scale list shown both imperial & metric. Now it depends of what the template is using.
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Add Scales To List
Oct 13, 2013I need to modify the code below.
When I run the command and write the scale, I need to change the name of the scale and the ratio automatically. The ratio should always be in the format "1: #", also the name of the scale. Maybe assigning more variables with "setq", I do not know.
(defun c:test ()(setvar "cmdecho" 0)(setq name (getint "
Type the scale you need:"))(setq ratio (strcat "1:" "0.1"))(command "-SCALELISTEDIT" "Add" name ratio "Exit")(setvar "cmdecho" 1)(princ))
AutoCAD Inventor :: Annotation Dimension To Parts List?
Mar 24, 2013In the drawing, I have my iPart which is automatically driven at certain instance and also the dimension in the drawing is automatically driven. How I can get the value of that dimension so I can put it inside my parts list? whenever I click that dimension it's showing me this value "<<>>".
View 8 Replies View RelatedAutoCAD Civil 3D :: Export LandXML Error - Printing Point List
Sep 28, 2012Using 2010 Civil3D and trying to use "Reports" to print a point list and I am getting error:
Export LandXML is currently is currently not supporting the following drawing units:
Millimeters, Centimeters, Decimeters, Inches.
I have used the unit command to make sure I am in feet. Niot sure what else to look at.
AutoCAD Civil 3D :: Import Micro Drainage - Parts List Missing
Aug 19, 2013I’m trying to import a .sws file from micro drainage into Civil3D and I’m getting the error on the attached image. When I select the drop down box for the part list I don’t have any options?
View 1 Replies View RelatedAutoCad :: How To Reset Large Number Of Annotation Scale List
Oct 21, 2011i m new in auto cad 2010 i today i face new problem i dont this is what? the message is that " the drawing contains a large number of annotation scales do u want to reset the scale list? "
View 2 Replies View RelatedAutoCAD Civil 3D :: Reset Drawing Scale List?
Sep 18, 2012before when reset scale it will have 1:1000, 1:2000, something like that.
now when reset it is same as autocad. which is like 1:1 (should be 1000), 1:2 (should be 2000)
what changed? i know it's just the name but this is bad. shoudln't change something like this all the sudden. hopefully is some variable.
working in metric.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
AutoCAD Civil 3D :: Quick Way To Print Out A Layer List From A Drawing
Jun 26, 2008Is there a quick way to print out a layer list from a drawing.
Civil 3D 2013
Win 7 Pro x64
Intel Xeon 2.0GHz
12Gb Ram
ATI Firepro 4800
Dell T5500
AutoCAD 2013 :: Export Revit Steel Drawing And Import Model As Xref
Jan 6, 2014My firm is starting a project....the Structural side is going to be don in Revit 3d and our Mechanical side uses Autocad w/Cadworxs for our 3d package. Is it possible to export the Revit steel drawing and import that model into Autocad as an xref?
View 1 Replies View RelatedAutoCad :: Drawing At Different Scales
Oct 9, 2011I am a very infrequent user of CAD and still do things like I used to do back in the '90s.
I draw in Model space at full scale--except, and this is why I am posting this question, when I have a small detail I want to be visible.
Can I draw a detail in Model space that is a different scale than the main drawing, or do I have to make it 'larger' by using Paper space and a viewport. Like maybe a block or some procedure I am unaware of.
AutoCad :: How To Set Drawing In 1:160 Metric Scale
Dec 27, 2011Can i set my drawing in 1:160 metric scale..... because that one scale is not in CAD.........
View 9 Replies View RelatedAutoCad :: Excess Scales On Drawing
Nov 16, 2012I have just received a drawing, and getting message on excess drawing scales trying to xref it into drawing, how do i change scales, get rid of all different annotation scales how can i purge it?
View 2 Replies View RelatedAutoCad :: Metric Drawing In Imperial Template?
Aug 1, 2011I have copied building from metric drawing to imperial template the template i use. Now I want to dimension it but impeial dimension are not equivalent to metric,which should be because building stays the same size, i can scale the building but i want to know if there is way to overcome this issue without scaling the building
View 1 Replies View RelatedAutoCad 2D :: Metric Output In Mm Unit Drawing
Jan 14, 2013I'm trying to make an ATTDEF (in combination with a circle/reference object) to show coordinates in meters, even though the drawing units are in mm.
The general drawing units may not be changed. I want the output to be 7,453 rather than 7453. Yes, with comma and three decimals.. But how ?
AutoCAD Civil 3D :: Can't Use Import / Export Under Planning And Analysis
Aug 12, 2013I get this message FDO provider 'OSGeo.SHP.3.8' everytime I try to import polylines into shapefile format.
View 2 Replies View Related