How to make txt orientation match layout without also having annotative scales. I need the txt to be a fixed size according to other drawing objects in different viewports -with different scales - and with different orientation.
View 3 RepliesIs it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines.
I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
Is it possible to have a dynamic block with text which, when inserted into a drawing, will show the text orientation matched to the layout? I have a non-dynamic block which is simply a donut and a piece of text. When I insert it into a drawing, the text orientation will change to suit the orientation of the layout. I created another block with the same entities but I also added a couple of lines extending out from the center of the donut. I added stretch and rotation actions in order to rotate and stretch the lines. I also gave the block visibility states so that either one or two lines would appear (the block is a utility pole,by the way, with the lines representing guy wires). When I insert the dynamic block into a drawing, I cannot get the text to match the orientation of the viewport. I've tried changing different combinations of settings but the text won't appear horizontal.
The two blocks I mentioned above are inserted into one file with a number of other blocks. When I check the properties of the non-dynamic block, the "match orientation" is set to YES. I cannot, however, change the "match to orientation" setting to YES on the dynamic block. Is this simply because it is a dynamic block or am I missing something? I don't create a lot of dynamic blocks and therefore I am not a wizard at it so I am assuming I am doing something wrong.
For a project we are currently working on all files are stored on projectwise, all xrefs run through projectwise, so essentially whatever changes are made are immediately avaliable to everyone working on the job. This is great and all, but, one of the companies dwgs have an average of 11,000 + annotation scales. And those dwgs are referenced into ours. Usually in a situation like this we would just get rid of the annotation scales in the original, but since its run through projectwise every time they open and close one of these dwgs it over rides any changes we made (like getting rid of the annotation scales) We dont use annotation scales and i never have, is 11,000+ alot of annotation scales or is that normal? half the time i open the dwgs with these xrefed in it crashes autocad or takes forever.
View 7 Replies View RelatedAny way, through acad.lsp or similar, to check "Yes" and "Always perform my current choice" for all users in the dialog below? I just don't know if this is a system variable or something else that is easy to set.
View 2 Replies View RelatedI have some annotation scale in my drawing but over the course of the last year many have come from different places.
We use Annotation scales called Meters 1:1000 but another company we work with use 1:1000m. Is there a way to merge these two annotation scale to Meters1:1000?
We are using in the office annotative blocks with text attributes.
When changing the display annotation scale, the attributes go normally, at the beginning, all back to 0,0,0 point; what we solve by using ATTSYNC command, and works fine; they go back to correct size and location.
But, for some reason in some computers, when closing and saving the file, and opening it again next day, all the attributes, at the same display scale than the day before, are all wrong size and location.
I have tried to uninstall the whole program and install it again from zero, and the same problem persists.What can I do?
I can not figure out why my annotation scale list has very few scale listings to choose form. The only scales that are listed are ratio (i.e. 1:1), i seem to be missing feet and inches (i.e. 1/4" = 1'). Is there a way to turn the rest of the scales on?
View 3 Replies View RelatedIf I accidently turned it off and can not find it in the Hiddeen Messages Settings dialog, is there a variable or registry key or other trick to turn it on again?
Would be interested in a variable for the "missing shx files" dialog as well.
I have determined that an AutoCAD drawing has the unfortunate ability to have Annotation Scales "hard coded", meaning they CANNOT be removed from the drawing.
Let me explain....
In a detail drawing file (i.e. my master drawing file where I keep all of our standard details), I was getting duplicate Annotation Scales. I would try to use the SCALELISTEDIT command to try and delete the anno scales not being used, but it would appear they WERE being used. (and resetting the anno scales didn't work either)
I was using a combination of tricks to determine WHICH annotation objects were using the duplicate anno scales. I would set ANNOALLVISIBLE to 0 and set the CANNOSCALE to the duplicate anno style to see where they were being used with no luck
I would then use the QSELECT command to group select each type of annotation object that were annotative, and check to see if they were using the duplicate scales. Again, no luck
THEN, I decided to cut-n-paste each detail one-at-a-time from my master drawing file to a new BLANK drawing with only one annotation scale in it (i.e. 1:1). I would paste a detail, and then enter the SCALELISTEDIT command to see which anno scales "came along for the ride". I pasted a particular detail that carried over the duplicate anno scales, but when I checked all of the annotation objects for the duplicate anno scales - NOTHING! I then deleted that particular detail, purged it, and then I was able to delete the duplicate anno scales. But no matter what I did to try and fix that detail (i.e. wblock, cut-n-paste, save-down, etc) the duplicate anno scales simply will NOT be allowed to be deleted even though i cannot find any objects associated with them.
Using Civil 3D 2012, is there a way to import/export a list of metric annotation scales for use in another drawing?
View 4 Replies View Relatedcreate a code to add scales to the scale’s list?
I just want to have the necessary scales, so don’t want to add to the template.
The command function is basically to allow me type the value of the scale and based on that, adjust the properties of the scale. (Name appearing in scale list - Paper Milimeters - Drawing Meters)
Example:
>Command line: setscale
>type the value of the scale to create: 50
set 1:50 to default
when i bake my texture, the rendered texture is not exactly matched to the UVs...in better words the rendered bitmap is a little expanded of each clusters of UVs. so with the distance of 0 i packed UVs it is a big problem because the rendered clusters will interact to each other. how can i tell 3s max to exactly match the rendered texture to the UV clusters?
View 1 Replies View RelatedUsing '09LT and was wondering if it's possible to have different line type scales in different viewports on the same layout tab?
View 1 Replies View RelatedI am a very infrequent user of CAD and still do things like I used to do back in the '90s.
I draw in Model space at full scale--except, and this is why I am posting this question, when I have a small detail I want to be visible.
Can I draw a detail in Model space that is a different scale than the main drawing, or do I have to make it 'larger' by using Paper space and a viewport. Like maybe a block or some procedure I am unaware of.
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting so I am asking for pretty specific instructions.
I am using Map 3D 2013
I have several drawings in which I want to use a line type (centrex2) at a specific scale. The scale setting is exactly the same in all the drawings but in some the line type is coming out at different scales, all larger, but not the same or to a set factor. All the entities in question are poly lines (2d).
I have checked in all drawings that:
global scale factor and current object scale in the line type manager are the same (1.0)drawing units are the same (unitless)‘use paper space units for scaling’ is always deselected line type generation is always enabled.
my linetype scales in model space look good, when i go to paper space to print the linetypes are huge and way out of wack. what is my problem?
View 3 Replies View RelatedI used the layout wizard to configure 2 vertical viewports as instructed in the manual. Next I try to paste an object in one viewport at a scale of 1:20, engineering imperial. The object appears in both viewports in model space. I only want the object in one viewport and I cannot erase the object in the other viewport, since they both dissappear. I also cannot draw a line in one viewport without it appearing in the second viewport. If I switch one viewport to current paper space the line can be drawn but I want each viewport to be at a different scale. Is there some way around this? Is my AutoCAD LT program capable of doing this?
View 9 Replies View RelatedYesterday, I sent a drawing that I scaled as 1/2" = 1'-0" in an Adobe PDF, and was told by the receiver that the drawing scale was off by 3-4% when they measured it. Hoping that is was the printer's problem, I sent a drawing from another file to FEDEX, and went and scaled that one myself. Sure enough, it's off. It doesn't matter whether it is windowed or brought in a paper space viewport.
View 9 Replies View RelatedI just started at this company and each time I try to choose a scale for my viewport I am confronted with a daunting list of hundreds of scales to choose from. Most of them have XREFXREFXREFXREF....following them.
how can I reset this to the default list of scales? Or at least purge or edit this massive list. BTW, the same happens when selecting annotative scale.We are on AutoCad 2008.
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting.
We deal with multiple architects at our company, all of whom have different standards for their Linetype Scales (on a drawing at a scale of 1/8"=1'-0" some use 36, others 24 etc).
We need to take their Architectural drawings, remove all of there dimension notes etc and create an empty floor plan we put our designs on.
The issue is that we cannot have all of our symbols work with one consistent linetype. We have to go into the block and manually overide the LTS of the individual item to suite the LTS of the architects drawing.
Is there a way we can insert the architect background as an x-ref and have the LTS of our drawing not effect it? Or possibly a LISP/Script that divides the individual LTS of all their entities by their global LTS so everything looks fine in our drawings.
We have had issues with annotative objects in the past with some of the architects drawings so that is not a viable option.
After many years, my office has finally come to the realization that we need some standards when it comes to AutoCAD. One of the standards I'm trying to figure out is regarding the pen type settings and various scales.
How to go about setting up one ctb file that would cover printing drawings at various scales, but the line weights will remain proportional to the appropriate scale? Our current method of printing is setting up a 24"x36" sheet in paperspace and printing at 1:1. Sometimes we have to do our drawings at 1/8" and others we can do at 1/4", but regardless of the scale, the drawing is done with the same lines/layers. The current method of plotting is by using 2 different ctb files, one for the 1/4" scale and the other for the 1/8" scale. This seems a little ridiculous. I know there is the "scale lineweights" box, but doesn't that just apply to when you change the plot scale?
My linetypes show up way too big in my viewports at 1/8" scale as compared to my Model space. pslt and mslt both at 1, units are inches, global linetype scale at 80. What am I missing?
View 1 Replies View RelatedCan I have 2 drawings on the same sheet to different scales.
I am trying to make a template for a simply drawing of a property at say 1:100 with a location plan of the area at say 1:1250.
I have just received a drawing, and getting message on excess drawing scales trying to xref it into drawing, how do i change scales, get rid of all different annotation scales how can i purge it?
View 2 Replies View RelatedA query, any of you know any method or function that tells me the orientation of a polyline, if it is clockwise or counter-clockwise
View 9 Replies View RelatedI have several drawings and which have different scales (1:50, 1:20 and 1:10) all in one dwg file. I made different .ctb files for each of them to make easier to interchange drawings between two different scales. But now I'm plotting each of them onto seperated rolls. I wonder if there is a way to plot all of them onto just one roll?
View 9 Replies View RelatedTrying to set a Phantom line as the property line and also use dashed lines (ACAD_ISO03w100)
I can mess with the ltscale and make it so one or the other reads properly, but never both. The Phantom displays correctly at ltscale: 1, the dashed lines display when ltscale is .1 they are on different layers
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?