Using either Universal Document Converter for JPEG, or Adobe Acrobat 9 for PDF, AutoCAD 2011 (suddenly and without warning) started truncating 15~20 character filenames to 3 character filenames when printing.
It used to plot to the complete filename, swapping the JPG or PDF extension for the DWG extension, until last Friday.
We are using Autocad 2012 and 2012LT in our office and with this version started using the built in feature of DWG to PDF. One issue we have come across is, if we create a pdf file and then need to recreate the same file we can not overwrite the existing file. We are forced to either give the new file a different name or go back and delete the existing file prior to creating the new one.
View 7 Replies View Relatedhow does one go about truncating surface contour elevation labels so they only show up to the tens place on the left side of the decimal (i.e. 50.25 instead of 5150.25)? I tried changing the rounding option under the style edit to "truncate" but that did not appear to change anything...?
View 6 Replies View RelatedHow to truncate coordinates in a C3D point table?
My situation is that I have ground coordinates that are similar to state plane, but because they are not on the grid, they aren't exactly the same. I want to display the coordinates without the first two or three numbers, in order that people won't get confused and think that they are on the grid.
C3D - 2014
I've run into the Photoshop CS5 bug whereby an action with save-as truncates the filename (and adds " copy").
For the original bug, see for example:
[URL]......
I have created something in Photoshop and saved it as a jpeg but when I open it up as a jpeg and try to print, it comes out pixelated. It has text and brushes in it.
View 1 Replies View Relatedhow can i print 2 copies of the same image into 1 sheet of A4 size paper?
View 7 Replies View RelatedI need to submit files in JPEG for printing. I started with a 105 MB TIFF file in PS and when I save as JPEG on quality 12 I end up with a 5 MB JPEG. Does this sound right - I am wanting an A3 print.
View 2 Replies View RelatedI've done quite a bit of research in the forums for a similar problem but not quite got any suitable answer. I'm running LR3.6 on WinXP SP3 with 4Gb RAM (3Gb useable). I'm trying to print 140 images setup on 7 pages each 16" x 24" JPEG size files (settings as below). Surely that should be a doodle? 2 hr+ later, I just have the "Preparing Print Job" progress bar doing nothing like it's expecting further input from me. No error messages, nothing, until I quit. Is there anything I should be watching out for? It's the first time I've tried to convert such a large collection to file and it's rather worrisome that I have these problems. case of "user error"
View 2 Replies View Relatedhow I can do a batch plot to PDF whilst appending some element to the end of the filename?
Using AutoCAD 2011's batch plot, or TrueView 2014's batch plot the default PDF filename when plotting to PDF appears to be:
<file_name>-<layout_name>.pdf
Which is okay. But I want to append to that the revision of the layout (C1, C2, etc.) which I currently store in a title block as a block attribute value. Any method for somehow pulling this out and including it after the filename such that I could end up with:
<file_name>-<layout_name>-<revision>.pdf
We're currently trying to transition to using the Sheet Set Manager, is the above any easier to achieve using that?
i know how to attach a jpeg to my autocad drawning but that is not doing the job, i have to re-attach the jpeg every time I re-open the file. So my question is how do I insert it to my dwg? Is it the same method as pdf (attachpdf)?
View 1 Replies View RelatedI have a company logo that is a jpeg, I can insert it in a title block but when i print the drawing in black and white it is a blur due to the dark colors in the logo. Is there a way to convert it to a drawing so I can adjust colors/size to plot properly?
View 3 Replies View RelatedI am creating a large base map and the county is supplying me with a bunch of jpeg files to use. Each map seems to come with 5 different files..how to put these images in correctly using AutoCAD 2010.
View 5 Replies View RelatedSo I use a seperate program outside AutoCAD to create my 3d models - do a high quality raytrace and get a really nic, clean, image. When I put the image into autocad to use in my drawing sets, the image loses its clarity and the edges look a bit jagged.
View 7 Replies View RelatedWhen inserting a jpeg into a drawing is it possible to insert it via it's center point? I am inserting utillity drawings on to an OS background and if i could insert via the center point it would save me a lot of time.
View 3 Replies View RelatedWe are using Inventor 2011.
Inventor adds extra spaces to the parts list filenames when they wrap.
The space is added just before the break.
We access the parts list in several VBA programs. Mainly to get the line Item number.
With the Filename corrupted with random space characters I cannot tie the document to the item number in code.
Is there a way to get the true fully pathed document name from a parts list Line item instead of the flakey filename that is displayed?
We are having a print server in which HP DJ Z6200 printer is attached and shared. Nearly 200 users (with Win 7 64bit) are using this plotter. There are few other HP plotters also attached on this print server.
While trying to print any drawing from this HP DJ Z6200 printer, AutoCAD is showing below mentioned error -
None:This plotter configuration cannot be used for one of these reasons: the driver cannot be found, the evice can not be found or the device has a problem. The none plot device has been substituted.
After several googling & digging into the AutoCAD forums I have found that we need to create .PC3 file for this plotter. But while trying to do so, getting the same error message as mentioned. But from the same system, with any other application (MS Word, Excel, Acrobat), we are able to print on the same plotter. After several tryout, we have managed to create a .PC3 file from an Windows XP system. By copying that .PC3 file to affected system, printing is working fine. But its a work around for us as its very difficult to copy-paste .PC3 file for all the users (around 200 or more from different locations).
I am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
View 3 Replies View RelatedSo my pluming layer is on and "no plot" is NOT selected, yet when I plot, it does not show up? It was working fine last week and i don't think has been saved since then. Also, the xref prints on other sheets, except this one so i'm thinking there is a difference in the page setup but I dont see any discrepancies.
View 2 Replies View RelatedI am having an issue printing to scale. When I print my drawings, the scale is about 4" over 100' out of scale (short) All of the settings are correct for plotting. This happens whether we print directly or to a pdf first. I know it is not just the plotter as I have tried three different printers with the same result. Also, I know it is not AutoCad as we are having the same issue printing from Microstation. I
View 9 Replies View RelatedI have lots of DWG files which I would like to convert to PDF. I guess this is not difficult at all with Scriptpro. However, I would like to know how to: Include in the script file (.SCR) a .CTB file so that the print is made in that way.
Create a Job so that Scriptpro runs once a day over all the .DWG files located in 1 directory. Is all these possible? I can use either Windows XP 32 bit, Windows 7 32bit and Windows 7 64 bit. My version o Autocad Mechanical is 2011.
I have a question about printing an autocad drawing. Currently I have two drawings on the model tab. I have drawn them both 1:1.
Now I need to print them both out on a same A3 paper, with different scales. The other one will be printed in 1:100 and the other in 1:50.
I have drawn a pretty good amount on autocad but this is my first time printing/plotting.
Goal of the task : I need the area of different type of soil. I have an image of these different soil, but I need to create a polygon manualy for each and every one of these. This is to calculate the runoff coefficient of a watershed.
As they are different by their colors (blue = lake, green = forest, etc), I would like to know if it is possible to convert these image to have an polygon usable in autocad, where I can calculate the area of each type of cover.
Actually on one of my draughtsman's computer, when he hits Ctrl + P, he is unable to see DWG to PDF option in the drop down menu, have I fortgot to install some feature because for rest of my draughtsman they all are getting that option.
View 3 Replies View RelatedI'm trying to print / plot a drawing which has a mixture of 2D plans and 2 3D views. I have the drawing set-up with viewports in paperspace. The objects in one of the 3D views prints perfectly, yet some of the linework from the second 3D view won't print.
View 6 Replies View RelatedACAD MEP 2012..Yes all the typical settings are correct.I have a 2-d drawing with 4 viewports, 2 of which will not print Black & White? Thought it might have to do with visual styles but changing them had no effects.
View 3 Replies View RelatedWe are using autocad map 3d 2012. and autocad 2000. when printing an old drawing made in autocad 2000 with version 2012 the bmp files that we inserted are printing pixelated almost like a digital camo would look. if we go back to 2000 they print fine. we are using a canon ipf710 printer/plotter.
View 7 Replies View RelatedI reloaded my CAD and now I have a black background in paperspace. This is what I want but I want it to print white while haveing a black backgroud for drawing. How do I do this?
View 3 Replies View RelatedI am currently using a laser printer that is reliant on the thickness of lines and objects in my AutoCAD file. I made a plotter tool file, laser.ctb, that is meant to control the default thickness of drawn lines. How do I know whether the .ctb file is being used by the printing interface?
View 1 Replies View RelatedWhen printing in AutoCAD 2011 when using the "DWG to PDF.pc3" printer, many lines in the resulting PDF are faded while others appear fine. I can zoom in and all the lines appear with the same weight. There are multiple layers on the drawing but all contain the same line weight and lines on the same layer appear with different weights.
This occurs on all AutoCAD files and all users. I have tried changing pin assignments with no success. Printing directly to Adobe PDF does not result in this issue but with each sheet of drawing being a different file this process uses a lot of time.
Whenever I try to do a print with a Visual Style of "REALISTIC" I get the following message, the numbers may change but it's always has the same outcome the program crashes and I have to restart the program.
So far, through trial and error it only appears to happen when using "REALISITIC" the other styles do not crash the program, at least not yet.
[Side note: may not of tried everyone yet.]
Error: "FATAL ERROR: Unhandled Access Violation Reading 0x000a Exception at 2653281h"
Running AutoCad 2012, with CadPipe 12.5. Printing is being sent to network printers and plotters, doesn't matter which one I send to, it will crash everytime.