AutoCAD 2010 :: Slow PDF Printing (file Size 400 Kb)

Jun 14, 2012

I import PDFs in Drawings and it takes forever to print.  PDFs are only 400KB, so not big files.

View 6 Replies


ADVERTISEMENT

AutoCAD 2010 :: Very Slow Reaction / Reduce File Size

Feb 10, 2012

A drawing is almost (20 MB). It is big I don't know why? It works normal in MODEL space. But when I switch to PAPER space, or to save, print, close and open the file, it shows very slow reaction.I made reset to the scale, checking LTScale, deleted all unnecessary objects, purge several times, UCS dynamic off, AUDIT, checking Xref's, texts are type (shx), No layers filters.The drawing has only one layout in few viewports. (isavepercent) to 0.BWhat can I do more to reduce the file size en make it faster?

View 7 Replies View Related

AutoCAD 2010 :: Crashes Printing On Paper Size 11x17

Jul 17, 2012

1. Does Autodesk not have their own support through e-mail or telephone?

2. Below is the crash log. Why the program is crashing when printing on a 11x17 paper size?

Problem signature:
Problem Event Name: APPCRASH
Application Name: acadlt.exe
[code]....

If the online privacy statement is not available, please read our privacy statement offline:C:Windowssystem32en-USerofflps.txt.

View 1 Replies View Related

Illustrator :: Running Slow Because Of Large File Size?

May 29, 2013

Is my illustrator running slow? I have an i7 3770K, 16gb ram, gtx 660i 2g, h100i, ax1200i and maximus formula v. I'm running dual 24" 1920x1080 monitors. File size is 800x600 pixals with 5 layers and 100+ paths in each layer. Is the program running slow because the file is too big or is there a problem with illustrator?

View 7 Replies View Related

AutoCAD LT :: Printing DWG To PDF - File Size Too Large In 2013?

Apr 5, 2012

I have successfully printed a dwg to a pdf but instead of its file size being 450k it is 1.4 m. This makes sending pdfs via email too cumbersome. It seems that even though the outcome is B&W somewhere along the line "it" thinks it is Color. I noticed that in Page Setup I no longer have the option of "DWG to PDF.pc3".

View 5 Replies View Related

AutoCAD Civil 3D :: PDF File Size Is Large When Printing Drawing With Rotated Views?

May 15, 2012

I'm working in Civil 3D 2012 and when I print to a .PDF with rotated views, the .PDF file is very large compared to file with non-rotated views. how to control the file size?

View 4 Replies View Related

Photoshop :: Printing / Saving To PDF / File Size Is Enormous

Apr 9, 2013

I am trying to convert a psd file that is a 36"X80" banner to a pdf file.  In the past, I have printed to PDF and all has been fine.  Today the Print to PDF fails...  it doesn't give me an error it just pretends like it prints to pdf with the status box popping up for a second, then nothing.  So I attempted to Save As a PDF instead this worked, but resulted in pdf with a file size of 453M!  This is much larger than the pdf's I was getting before, in the 3-ish M file size..

View 9 Replies View Related

Illustrator :: CS5 - Cannot Make Custom Size When Printing A PostScript File

Jun 28, 2010

I've recently picked up Illustrator CS5, when I save a file (or print) as a PostScript file. My aim is to convert the file to a PDF using Distiller and in the Print dialogue box, the PPD field in past versions says something along the lines of Adobe PDF 8.0. In CS5, I do not have the option to select that from the PPD drop down menu (Nor can I find the file to add to the list). Additionally, I can't make a 'custom sized pdf,' only preset paper sizes. I've had to resort to opening my files in CS3 to convert them to PostScript files. I forsee this becoming a problem once I start diving into some of Illustrator CS5's new features.
 
I get the feeling the program didn't install with an Adobe PDF plug-in and I can't seem to find a substitute online that isn't from 1999 (!). Is there a way to get that plug-in file that my copy of CS3 is using into my CS5?

View 9 Replies View Related

Paint.NET :: Printing Photos On Vinyl Wallpaper - File Size Restriction

Jun 25, 2012

I am planning to get some photos printed on vinyl wallpaper. The physical dimensions of the wall paper will be 1300mm x 2500mm and as I am ordering it online, there is an upload restriction of 8MB (file formats allowed are .pdf .jpg and .zip).

I would like to collage multiple images to create my wallpaper and plan to resize and edit each image before collating them in one large image. Then I will resize that image to be the final one (if that makes sense).

What I want to know is, is there any simple way to work out what my final image's pixel width and height will need to be to fit the 8MB restriction? I have no idea what the printing dpi is, the website only indicates that images should be 'at least 4MB for good quality'...which means nothing.

Ideally I would like to work with a starting image with 4x or 16x the pixels so it resizes nicely...I just don't know where to start.

View 6 Replies View Related

AutoCAD 2010 :: How To Reduce File Size

Jul 3, 2010

How I can reduce the file size in AUtoCAD 2011.

View 9 Replies View Related

AutoCAD 2010 :: Shrinking File Size

Oct 8, 2012

Was wondering if others could share thier tips/ tricks for shrinking file sizes.I have one in particular Which is not working well. It seems there are BIM objects in it, Is there a command to remove some of the "intelligent" features from the file? Or, what would be your usual courese of action to get the file size down?

View 2 Replies View Related

AutoCAD 2010 :: Cannot Decrease Size Of Drawing File

Mar 7, 2013

We have a drawing that has been exploded purged, overkilled, audited and we still cannot decrease the size of it.  Theres no blocks, theres no 3d, its a very simple drawing but I feear its corrupted.  I've tried copy/blocking the information out of it but that just makes it crash. I cant attach it its too big! (16 meg)

View 9 Replies View Related

AutoCAD 2010 :: DWG With 334 Layers - Reduce File Size

Nov 21, 2012

I have a DWG with 334 layers, Many have been Pasted in. I would like to reduce the file size of 30Mb and reduce the layer count. Can you produce 3 or 4 different DAG. by combining layers and save as a different DWG?

View 1 Replies View Related

AutoCad :: Super Slow Printing With Images

Mar 5, 2012

The company I purchased AutoCAD 2012 Electrical from had no answers and referred me to Autodesk. Autodesk has told me I have to just live with it because they have no plans to fix the problem, even though they recognize the issue. So I turn to the largest user group I currently have access to.

When I print a drawing, regardless of page size, that contains and image, I have to wait upwards of 10 minutes before the printer sees the drawing and begins to print. The clients I work with use quite a few drawings that contain images and I have days where all I am doing is printing jobs because I have to wait so long.

I have tried to change the print drivers. The printers I use are HP Laser M5035. I connect to them through a network however I have tried to connect to them directly with the same results. The only thing I have found to speed up the proccess, which i find to be rediculous, is to print the job to PDF and then print the PDF to the printer.

I have had the AutoCAD retailer's technicians as well as the Autodesk technicians log into my computer remotely to fix this issue and both recognized the same issue but after a month of trouble shooting I am still at square one.

Before I upgraded to AutoCAD 2012E I had AutoCAD 2009E and printing drawings with images was not nearly as bad. If I did not have to have AutoCAD 2012E I would revert back but this is not an option.

View 1 Replies View Related

AutoCAD 2010 :: Compressing Layers To Make File Size Smaller?

Oct 28, 2011

I have a huge file that I am working with. I keep getting fatal errors. I am trying to make the file size smaller. Within the file there are 1836 layers, I am trying to reduce that number greatly. There are also lots and lots of blocks. I have heard that it is possible to make all of the objects on one layer and also compress layers.

View 9 Replies View Related

AutoCAD Print / Plot :: Opening Drawings And Printing Over WAN Is Slow?

Aug 13, 2013

Is there a way to increase the access time so printing is faster?

I have AutoCAD 2013 and access drawings over VPN (6 meg pipe).

Both opening the drawings and especially printing them take a very long time.

It takes about 8 seconds to open drawings, due to all the modules loading on the bottom-left of AutoCAD. Printing takes even longer than opening the drawings.

Is there a setting I can change to speed-up access time?

View 5 Replies View Related

Photoshop :: CS6 Very Slow Printing

Aug 24, 2012

I have two systems.  The first a windows 7 32 bit quad core with 8 gigs ram  cs4 is installed on this sytem.  Time to print a standard job on an epson 4800 (which includes hitting print, selecting options for the printer and then being able to close the file and open another)  less than a minute.
 
Recently installed cs6 on new windows 7 x64 intel core i7 system with 12 gigs ram.  I have used both cs4 and cs5 on  this newer system.  Both ran the same file in under a minute to print as outlined above.  Once I installed cs6 however the print time ( as defined above)  for the same file above has now gone to 22+ minutes. on cs6, 18+ minutes on cs5  and approx the same for cs4 (all versions of CS are 64 bit on this system)
 
If there isn't an update to cs6 soon, I presume I will have to de-activate cs6, cs5 and cs4  and then re-install cs4 and cs5 to take advantage of my  faster system is that correct?

View 3 Replies View Related

Photoshop :: Slow To Start Printing

Apr 12, 2009

It's taking about 2 to 3 minutes for an image to start printing.  This problem started with CS-3 and went away with CS-4 for about a week and then started with CS-4 also.  What seems strange is that it suddenly started some time back in CS-3 and then went away when I upgraded to CS-4, but then came back again.

I ask it to print an image and then it takes 2 to 3 minutes before the printer dialog box shows up.  I adjust for print size and click "print" again.  Now it takes a couple of minutes for a second dialog box to pop up and I click "print" again.  Now in about a minute the printer starts to print.   Once the printer starts printing, the speed is normal.  What is the solution to my problem?

View 23 Replies View Related

Photoshop :: PS CS4 - Slow When Printing Multiple...

Mar 17, 2009

I work in a theatre and print a lot of programs and posters. If I send a print run of, say, 18 posters to the printer, Photoshop 7 generated once, then printed all the copies fairly quickly.

With CS4, it's like it's generating the image each time, so it's taking several minutes between each print. I tried saving as a pdf and going to Adobe Acrobat Reader to print and it does the same thing. Appears to work fine in Word and Excel, but of course, those are much smaller files.

I have to print 400 copies of an event program, how to speed things up!

View 2 Replies View Related

AutoCAD Inventor :: Can Flexibility Dramatically Slow Up Assembly And Make It Bigger In Size

Jan 19, 2012

I have a big assembly. It used to have aprox 280kB.

I have created the five flexible assemblies and it grew up to 2100KB and became

quite slow even with a lot of supressed parts.

The question is: should I blame the flexible stuff for this slowup?

View 1 Replies View Related

AutoCAD 2010 :: Slow Scrolling And Zooming

Sep 4, 2010

I tried searching for "Slow scroll" and found one topic about scrolling through layers, but not scrolling through the drawing in general. 

Problem:  When using the mouse to scroll through a drawing with an attached pdf underlay, the motion suddenly gets really choppy, and slow.  The PDF is about 3.5 Mb.   Its very annoying knowing that my computer should be able to handle it and then some.

Computer:  HP Envy 17 Laptop; i7 740 @ 1.73Ghz; 8gb ram, ATI Mobility Radeon HD 5850 1gb; Windows 7 64x

Failed Solutions: Hardware Accelerator on and off; Played around with performance settings.

View 9 Replies View Related

AutoCAD 2010 :: Plotting Seems To Be Extremely Slow

Jan 22, 2013

I recently upgraded from ACAD 2004 to ACAD 2012. In ACAD 2004, plotting was extremely quick. In ACAD 2012, plotting seems to be extremely slow. A basic drawing in 2004 plotted as a pdf file using CUTE PDF or PDF Creator would take about 5-10 seconds. In ACAD 2012, a  similar file using the same CUTE PDF or PDF Creator will take up to 2-3 minutes. Not a long time but when you are plotting a dwg set that has up to 10 tabs in it, it takes 20-30 minutes just to plot. Is there any way to speed up the plotting in ACAD 2012? I have both ACAD 2004 and ACAD 2012 loaded on the same computer.

View 4 Replies View Related

AutoCAD 2010 :: Mtext Objects Slow Way Down?

Feb 10, 2012

I have a bunch of dwg's that were converted from dgn's using Microstation V8's batrch convert utility. In many of them there are these Mtext objects that, when I hover over them, or when I pick them to change their properties using the properties dialog, slow performance way down. I have to wait about ten seconds for the machine to catch up.

This can get pretty annoying since it ouccurs when I merely cross over the objects when I am not in any command whatsoever.

The text objects are referring to a font that I do not have installed on this machine. I think it defualted to using simplex.shx as a result. I did not get any errors or warnings about the missing shx when I opened the file.

Using Civil 3D on a 64 bit Win 7 Dell POS - everything is up to date.

C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12

View 2 Replies View Related

AutoCad :: 2010 Really Slow / No Other Program Is Running

Nov 18, 2013

I am trying to work out a plan in Autocad and it goes so slowly. The slowest of all actions I do is always drawing a simple line. No other program is running on my laptop.

View 9 Replies View Related

AutoCAD 2010 :: Cursor Jumping And Slow

May 31, 2011

Just installed upgrade to 2012 on same machine as 2011. Within the drawing area of both Model & Paper space, cursor is jumping and slow across screen.

View 5 Replies View Related

AutoCAD 2010 :: ISO View Is Jumpy And Slow?

Sep 19, 2012

When I am in ISO view and chose anything other than wireframe, like "Realistic"  panning and zooming are very slow. Even a smaller drawing does not act normal. I use a 3rd party software for modeling ductwork and piping, the drawings work fine on our other machine, so it's not the modeling software. It's also not the drawing file, I have tried other drawings that I had no past issues with but it still bogs down.

I have tried the following:

Updated video driver.

Tried different settings under "Options" "Display" and "3D Performance"

Ran AutoCad repair.

Checked and turned off all snap settings and grid.

AutoCad 2011
Intel Core i5  3.60 GHZ
16GB ram
Windows 7 Profesional 64 bit
NVIDIA Quadro FX 1800

View 2 Replies View Related

AutoCAD 2010 :: SLOW Regen When Viewing From The Right?

Jan 9, 2013

What would cause AutoCAD to choke, ONLY when viewing a model from one direction? In my case, it's the right view, and it doesn't matter how I get to that view, ie "view, right" or "dview,clip". Views from other directions regen almost instantly, but from the right takes a full minute, while Acad tells me up top that it's [not responding].

Issue is only in single dwg. Tried audit, purge, etc. Wondering if there is some obscure (dwg specific) system variable causing this, before trying the WB to get rid of an offensive entity.

View 2 Replies View Related

AutoCAD 2010 :: Slow Save As With 2007 Format

Dec 18, 2012

i have big problem to save in Autocad 2011, then we save in 2007 DWG format it takes up to 3-4 min even local this problem exist, reinstalled i computer totally clean, no antivirus just windows 7 and updated,even  disabled fidelity. then i save in 2010 format it goes fast.

View 4 Replies View Related

AutoCAD 2010 :: Slow Picking And Properties Palette?

Aug 4, 2010

What setting would cause a huge, well about 5-second, delay when any entity is selected without a command active and only with the Properties Palette on-screen but autohidden? If command is given first, verb-noun, no hesitation after selecting at Select Objects: prompt. But, selecting any entity first, noun-verb, causes the 5-second delay before the mouse is again active. Very annoying. Closing the Properties Palette completely seems to cure the delay problem, but at a different cost in editing time.  The workstation is running WinXP Pro with 4 gigs of ram.

View 9 Replies View Related

AutoCAD 2010 :: Copy Paste Very Slow On 2012?

Aug 12, 2013

When I copy and paste on Autocad 2012, it goes very slow.

I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.

I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.

View 3 Replies View Related

AutoCAD 2010 :: Same Layouts In One Drawing But Slow Switching To One Of Them

Dec 6, 2013

i have a test drawing attached with layout 1 and layout 2.

from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.

this sample i attached has a xref binded. which result is the same 3 and  8 seconds respectively.

you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.

i did my research and haven't find the difference in variables between the two paperspace layouts.

tried all the variables made no difference:

psltscale, msltscale, celtscale, savefidelity, etc.

also set both viewoprts to undefined same thing.

the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.

is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.

Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved