AutoCAD 2010 :: Cursor Jumping And Slow
May 31, 2011Just installed upgrade to 2012 on same machine as 2011. Within the drawing area of both Model & Paper space, cursor is jumping and slow across screen.
View 5 RepliesJust installed upgrade to 2012 on same machine as 2011. Within the drawing area of both Model & Paper space, cursor is jumping and slow across screen.
View 5 RepliesI am running a new full version of AutoCAD 2014 on Windows 7 64 bit. It is litterally taking 5-7 seconds to zoom, switch pages, regen, or mostly anything else.
View 6 Replies View RelatedI use tabs in my document for indentation. When my cursor is at the beginning of a line, and I use the up/down keys, the cursor always jumps to the end of the first tab.
This only happens in tab-indent, not space-indent.
Is this supposed to be a "feature"? How can I make it stay at the same cursor position when navigating with arrow keys?
I have just swapped from PC to Mac and in the process upgraded from LR 3 to LR 4. I have always had some minor issues with the spot removal tool occassionally jamming up or not working smoothly and taking a long time in LR3 on PC, but so far using the tool in LR 4 on Mac has been painful. It is like it is slow to load, and then the cursor/spot removal circle just dissapears or freezes? I want to be able to fix minor blemishes etc quickly in LR instead of having to go to PS
View 2 Replies View RelatedWe are running AutoCAD 2011 and 2011LT on Windows 7 with 12gb of ram and a NVIDIA Quadro 4000 video card.
The problem did not happen to often when we were on XP, but now, whenever we're in a command, the screen jumps as if snaps were turned on with 1/2" spacing. We've tried upgrading the drivers and graphics cards as well as installed all updates I could find. We make sure drawings are purged and audited and Layer manager IS NOT kept open.
ouse has started jumping across the drawing screen. snap is off
View 1 Replies View RelatedUsing an old version of autocad 2012 in my laptop as backup loaded on Window 7. Everytime I used the snap mode it slow the movement of my cursor to move to specific location, but no problem using the Window XP.
View 3 Replies View RelatedWhen I open a large facility building drawing my mouse is "jumping" on the screen.
The resolution of the mouse does not allow me to select obejects on the screen because the mouse jumps in large increments.
I do not have this problem on smaller drawing, such as electrical schematics.
Is there a setting to increase the resolution of the mouse movemrnt id AutoCAD?
My cursor is very sluggish in AutoCAD 2010, works fine in 2009.
Is there a setting for the cursor speed or resolution that I'm missing?
My machine is Intel Core 2 Duo E6300, 1.86Ghz, with 3GB RAM,
Intel(R) 946GZ Express Chipset Family [Display adapter] on board video,
Windows XP Professional Service Pack 3, 32bit.
my problem is when i open cad 2012, the cursor keep become big.. i already try revert to default and it back to normal but when i close the program,cursor will revert again become big and hard to do draft.
My spec :
Acer aspire 4736z laptop
windows 7 64bit
4gb ddr2 ram
intel GMA 4500m graphic with latest driver
At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies View RelatedWith osnap on endpoint only, no other dynamic inputs on, no polar, 3dobject snap dynamic input, grid or snap on.
The cursor looks like it jumps up form the endpoint but actually it moves in the same Z as the osnap. Also when i zoom in i can't move my cursor to the upper or lower part of the screen depending on where I zoom too. If I turn magnet off it seems better but still not correct. In the drawing I uploaded I can't move the cursor up to the entities. If I open a new drawing everything works, on a different drawing everything works. If I insert this into a new file I get the problems back.
This is one issue that I really hate most in the mids of my drawing progress. Why my cursor are suddenly become invissible although it still active? My only option here to make visible again is to save and re-open it .
View 1 Replies View RelatedSoftware: ACAD LT 2010. Recently I upgraded to a new computer and Windows 7, from Win XP. Now ACAD is lagging and dragging. Also, sometime it takes forever to open a file.
Here are my new computer specs.
Dell Precision T3600,MT,425W
Four Core XEON E5-1607, 3.0GHz, 10M, Dell Precision T3600
How to resolve the issue of : Displayed drawing keeps on vibrating everytime the cursor is move.
View 5 Replies View RelatedI tried searching for "Slow scroll" and found one topic about scrolling through layers, but not scrolling through the drawing in general.
Problem: When using the mouse to scroll through a drawing with an attached pdf underlay, the motion suddenly gets really choppy, and slow. The PDF is about 3.5 Mb. Its very annoying knowing that my computer should be able to handle it and then some.
Computer: HP Envy 17 Laptop; i7 740 @ 1.73Ghz; 8gb ram, ATI Mobility Radeon HD 5850 1gb; Windows 7 64x
Failed Solutions: Hardware Accelerator on and off; Played around with performance settings.
I recently upgraded from ACAD 2004 to ACAD 2012. In ACAD 2004, plotting was extremely quick. In ACAD 2012, plotting seems to be extremely slow. A basic drawing in 2004 plotted as a pdf file using CUTE PDF or PDF Creator would take about 5-10 seconds. In ACAD 2012, a similar file using the same CUTE PDF or PDF Creator will take up to 2-3 minutes. Not a long time but when you are plotting a dwg set that has up to 10 tabs in it, it takes 20-30 minutes just to plot. Is there any way to speed up the plotting in ACAD 2012? I have both ACAD 2004 and ACAD 2012 loaded on the same computer.
View 4 Replies View RelatedI have a bunch of dwg's that were converted from dgn's using Microstation V8's batrch convert utility. In many of them there are these Mtext objects that, when I hover over them, or when I pick them to change their properties using the properties dialog, slow performance way down. I have to wait about ten seconds for the machine to catch up.
This can get pretty annoying since it ouccurs when I merely cross over the objects when I am not in any command whatsoever.
The text objects are referring to a font that I do not have installed on this machine. I think it defualted to using simplex.shx as a result. I did not get any errors or warnings about the missing shx when I opened the file.
Using Civil 3D on a 64 bit Win 7 Dell POS - everything is up to date.
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
I am trying to work out a plan in Autocad and it goes so slowly. The slowest of all actions I do is always drawing a simple line. No other program is running on my laptop.
View 9 Replies View RelatedWhen I am in ISO view and chose anything other than wireframe, like "Realistic" panning and zooming are very slow. Even a smaller drawing does not act normal. I use a 3rd party software for modeling ductwork and piping, the drawings work fine on our other machine, so it's not the modeling software. It's also not the drawing file, I have tried other drawings that I had no past issues with but it still bogs down.
I have tried the following:
Updated video driver.
Tried different settings under "Options" "Display" and "3D Performance"
Ran AutoCad repair.
Checked and turned off all snap settings and grid.
AutoCad 2011
Intel Core i5 3.60 GHZ
16GB ram
Windows 7 Profesional 64 bit
NVIDIA Quadro FX 1800
What would cause AutoCAD to choke, ONLY when viewing a model from one direction? In my case, it's the right view, and it doesn't matter how I get to that view, ie "view, right" or "dview,clip". Views from other directions regen almost instantly, but from the right takes a full minute, while Acad tells me up top that it's [not responding].
Issue is only in single dwg. Tried audit, purge, etc. Wondering if there is some obscure (dwg specific) system variable causing this, before trying the WB to get rid of an offensive entity.
Is there a way to get a white cursor to automatically change to black when hovering over white images or hatches that doesn't involve turning off hardware acceleration?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
i have big problem to save in Autocad 2011, then we save in 2007 DWG format it takes up to 3-4 min even local this problem exist, reinstalled i computer totally clean, no antivirus just windows 7 and updated,even disabled fidelity. then i save in 2010 format it goes fast.
View 4 Replies View RelatedWhat setting would cause a huge, well about 5-second, delay when any entity is selected without a command active and only with the Properties Palette on-screen but autohidden? If command is given first, verb-noun, no hesitation after selecting at Select Objects: prompt. But, selecting any entity first, noun-verb, causes the 5-second delay before the mouse is again active. Very annoying. Closing the Properties Palette completely seems to cure the delay problem, but at a different cost in editing time. The workstation is running WinXP Pro with 4 gigs of ram.
View 9 Replies View RelatedWhen I copy and paste on Autocad 2012, it goes very slow.
I installed the service pack, I tried removing the layer filters and a few other fixes that are out there. The machine is powerful enough to handle the application.
I tried reinstalling the application and that didn't do anything. The DWG file that's on the network share is being used by other people without any issue, I'm the only one having this problem.
i have a test drawing attached with layout 1 and layout 2.
from model to layout 1 takes 2-3 seconds on my crappy computer, from model to layout 2 takes 8-10 seconds on the same crappy computer.
this sample i attached has a xref binded. which result is the same 3 and 8 seconds respectively.
you may think this is not a big deal. but layout 1 will take 10 seconds to to switch to if you have 5 xref while layout 2 will take a minute.
i did my research and haven't find the difference in variables between the two paperspace layouts.
tried all the variables made no difference:
psltscale, msltscale, celtscale, savefidelity, etc.
also set both viewoprts to undefined same thing.
the only difference is "1" is created from a blank autocad template by selecting "metric - no template", and "2" is imported from a civil 3d dwg after done a plan/profile production and that thing created that layout.
is there a tool to compare all variables between 2 layouts and find the differences? i am certain the problem lie within system variables.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
When switching from layout to model space, and back again, and when switching layouts the regen is slow to an extreme, upwards of (3) minutes. Using Renenall in layout, the regens are quite slow as well. Windows 7, AutoCAD 2011, NVIDIA Quadro FX1800, most current driver.
Additionally, when publishing, the regens are equally slow. LAYOUTREGENCTL setting seems to have no affect.
I import PDFs in Drawings and it takes forever to print. PDFs are only 400KB, so not big files.
View 6 Replies View RelatedAutocad 2012 was working fine until a week ago when it started taking a long time to open drawings--even search for drawings on our network. It also takes at least 30 seconds to save files, where it used to take 5 seconds at most.
I found the AutoCad 2012 and AutoCad LT 2012 SP1 Ribbon Hotfix, which sounded like my problem, but it is for Product Version F.107.0.0 and I have Product Version F.51.0.0.
We are having slow keyboard response while typing in CAD 2010. (It happened a little while using 09 as well). We will start typing a command and our cursor will get ahead of what we're trying to type. Our dynamic input is OFF.
View 3 Replies View RelatedWe recently migrated our fileshare project drawings from Window Server 2003 to Window Server 2008-R2 x64...We are experiencing slowness opening or only right click button on more dwg on XP Pro 32/64bit workstation.
Problem repeats if you try to copy many dwg files from windows explorer, right button properties..i have already disabled "validate digital signatures and display special icons" on each machine .There isn't any slowness problem opening files on other application e.g.. Office.