AutoCAD 2010 :: Cursor Jumps With Endpoint On
Nov 11, 2013
With osnap on endpoint only, no other dynamic inputs on, no polar, 3dobject snap dynamic input, grid or snap on.
The cursor looks like it jumps up form the endpoint but actually it moves in the same Z as the osnap. Also when i zoom in i can't move my cursor to the upper or lower part of the screen depending on where I zoom too. If I turn magnet off it seems better but still not correct. In the drawing I uploaded I can't move the cursor up to the entities. If I open a new drawing everything works, on a different drawing everything works. If I insert this into a new file I get the problems back.
View 4 Replies
ADVERTISEMENT
Nov 28, 2012
My cursor jumps every time when I single click on to hatch or use the hatch command it also does the same with text.
View 1 Replies
View Related
Sep 22, 2011
All toggles are turned off and the cursor jumps all over the screen when zoomed in. Also, there are two rectangular boxes in the northeast quadrant of the crosshairs when moving near a point or node. How to eliminate this? All function keys are off.
View 2 Replies
View Related
Nov 19, 2011
I use Adobe Photoshop Elements Version 8.0, and I use Windows 7.
The problem: Whenever I use any tools involving the usage of the mouse on the canvas, everytime I click to use the tool, sometimes the cursor seems to 'jump' out of position and I end up unintentionally putting paint on the wrong part of the canvas. And before I release the click, I try to move the mouse around in random directions to no avail; the mouse doesn't respond until I release the mouse. In another similar case, sometimes for a split second the cursor seems to move on its own and it leaves behind a random trail of color. Example: Let's say I wrote down my name 'Andrew' on the canvas. I end up something similar to 'Anc e.", along with a black dot/calligraphic stroke or two unintentionally placed when writing down my name. I had to undo and click several times until I properly got the tool working. I'm working on a certain project in PS
I'm guessing a part of my bare hand is just barely in physical contact with the touchpad?
View 4 Replies
View Related
Aug 1, 2013
I have a layer I'm resizing and is currently in Transform.When I beging to drag the layer to position while it is in resize the center reference point will jump to my mouse causing me to move the reference point outside of the tranform layer. Normally I would have to click on the reference point and drag it intentionally or hold CTRL and click in the transformed layer to set a reference point, but it since CS6 is had still remainded in CC.
This happens when I transform the layer (Ctrl+T) and then grab the layer to move. I have to put the reference point back to center via mouse or by the reference point on the menu bar up top. Then I can go back and drag my later where I need it to finish my transform.
View 2 Replies
View Related
May 2, 2012
When I select a hatch in my dwg, the ribbon jumps to the hatch settings. Is there a way to make that just stay on the home tab?
View 2 Replies
View Related
Sep 2, 2009
My cursor is very sluggish in AutoCAD 2010, works fine in 2009.
Is there a setting for the cursor speed or resolution that I'm missing?
My machine is Intel Core 2 Duo E6300, 1.86Ghz, with 3GB RAM,
Intel(R) 946GZ Express Chipset Family [Display adapter] on board video,
Windows XP Professional Service Pack 3, 32bit.
View 9 Replies
View Related
Nov 27, 2012
my problem is when i open cad 2012, the cursor keep become big.. i already try revert to default and it back to normal but when i close the program,cursor will revert again become big and hard to do draft.
My spec :
Acer aspire 4736z laptop
windows 7 64bit
4gb ddr2 ram
intel GMA 4500m graphic with latest driver
View 3 Replies
View Related
Oct 3, 2012
At no specific time when using ACAD 2012 MEP the cursor disappears. cross hairs and all. the only way to get them back is to close ACAD and open it back up.
View 4 Replies
View Related
Apr 23, 2012
This is one issue that I really hate most in the mids of my drawing progress. Why my cursor are suddenly become invissible although it still active? My only option here to make visible again is to save and re-open it .
View 1 Replies
View Related
May 31, 2011
Just installed upgrade to 2012 on same machine as 2011. Within the drawing area of both Model & Paper space, cursor is jumping and slow across screen.
View 5 Replies
View Related
Mar 4, 2013
Software: ACAD LT 2010. Recently I upgraded to a new computer and Windows 7, from Win XP. Now ACAD is lagging and dragging. Also, sometime it takes forever to open a file.
Here are my new computer specs.
Dell Precision T3600,MT,425W
Four Core XEON E5-1607, 3.0GHz, 10M, Dell Precision T3600
View 9 Replies
View Related
May 10, 2013
How to resolve the issue of : Displayed drawing keeps on vibrating everytime the cursor is move.
View 5 Replies
View Related
Mar 29, 2012
Is there a way to get a white cursor to automatically change to black when hovering over white images or hatches that doesn't involve turning off hardware acceleration?
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
View 4 Replies
View Related
Apr 23, 2012
URL....Constantly in 12 and 09 I have had issues snapping to endpoints since the changes to osnaps in ACad itself. It doesn't seem the ramifications were followed thru to ACA.
They seem to have addressed some issues in 12 but not all and often it dails completely.As osnaps is a basic functionality I think Adesk needs to get this working properly and as a fix for 10,11,12 and 13.
View 4 Replies
View Related
Mar 20, 2012
I recently purchased LT 2012. I was using LT 2008 until now. When I grab a line from the endpoint grip and try to lengthen it by typing in a value it either shortens the length by the value I type, changes the overall length to the value I type, or does what I want it to- actually makes the line longer by the value I type but doesn't do any of these consistently. It didn't do this in any older version I've used and I can't find a setting to change it.
View 9 Replies
View Related
Jul 17, 2012
While using V2013, the middle button on the mouse to pop up the snap chart (mbuttonpan set to 0), I'm getting the zoom extents command in the middle of a command using snap from, then snap endpoint.
Here a quick example: while using hotkeys, I type c for copy-select objects-right click-choose basepoint, (here's where the problem occurs), middle mouse F(from) middle mouse E (endpoint). If I middle mouse F (snap From) pause then middle mouse E (snap endpoint) this works as it should. I click through the commands fast and it's slowing me down every time it zooms to extents in the middle of the command, which makes me zoom back in or cancel & undo.
View 9 Replies
View Related
Oct 22, 2013
I am look at a way to place the start of a line a certain distance away from the end of another endpoint. Is there a more productive way of doing this rather than drawing one line on the x axis and another on the y axis.
View 9 Replies
View Related
Feb 1, 2013
So when i would select a line, hover over one of the endpoints, the length and angle would be shown, as a quick dimension. for some reason that has stopped, all it does now if i select the line, hover over an endpoint the only thing it says is stretch, or lengthen.
RANT!!! (come on 2013, thats stupid, stretch and lengthen are basically the same thing, dont you think if i stretch something it would automatically lengthen something, and if i lenghtened something, it in fact would also be stretching it. and to see you replaced the simple dimensioning of that line with a pointless i wouldnt call it option. now to figure out the length i have to keep the properties file open, or i have to draw a faux line over the current one just to check its length, or literally i have to draw a dimension line.) EnD!!
What option might have been turned off? and that the new array no longer gives you a box, but you do it all through the command line. or the dynamic input. That was an AWESOME box that i do miss dearly, and no longer have the option to bring back..
View 4 Replies
View Related
Sep 1, 2010
I'm electrical and have my own display set oddly enough named "electrical". When I set the display to "electrical" I can't osnap to endpoint or midpoint of smart walls in the background (nearest works fine). When I change the display to something else, generally it works.
Is there an "osnap" setting for displays?
View 7 Replies
View Related
Feb 12, 2013
Can I select a line and get the nearest endpoint so I can do something to the line using the endpoint as a base?
It will include an ssget and an osnap "end" in the code, but not too sure how to put it together.
View 3 Replies
View Related
Oct 17, 2012
I have tried using the hot grips selection by holding shift, but some of the grips are overlapping and I can only select the top most grip. It is also a slow process because I must click each individual grip that I want to move as a whole. Is there a way of selecting multiple grips at once including grips that are beneath others?
View 1 Replies
View Related
May 4, 2013
I want to make it so that I can keep selecting several objects and get all the starting points and endpoints of each one with (setq ent (entsel))
(Defun c:demo (/ ent)
(setq ent (entsel))
(princ)
)
View 9 Replies
View Related
Apr 23, 2013
How do I join two line endpoint together, which terminate at the same anchor point and are at a 90 degree angle, to form a corner instead of a stair step? My problem is on the left, and I want it to look like the right corner.
View 4 Replies
View Related
Apr 13, 2012
We are using autocad 6 nad install it in new dell computer,windows xp, the mouse jumps up and down and hard to control, sometimes it moves by itself a leave a trail, fist time it happens.
View 1 Replies
View Related
Jun 8, 2012
[URL]....SAYS:
“Adjust the length or angle of straight segments
1. With the Direct Selection tool, select an anchor point on the segment you want to adjust.
2. Drag the anchor point to the desired position. Shift-drag to constrain the adjustment to multiples of 45°.”
Question: How do I proceed if I’d like to extend a line on one side by its endpoint, while I want to keep its original angle instead of 45° degrees?
And: assuming we’re not working with a standing-alone line, but as part of a construction, as you can see on the screenshot. The point should be move to the intersection on both lines (green and turquois).
I thought, maybe working with functions in GRAPHER – but I hope there is an easier way directly in ILLUSTRATOR.
View 8 Replies
View Related
Mar 25, 2013
The original model, in shade visual style, all objects are distinct and separate objects as they should be. However, when an xref is loaded (overlay) the model (display) jumps and the objects that were distinct now appear mingled together. Also, when you hover over an object it's highlight outline does not align with the object, it is offset from it approximately the amount of the display jump. I compared display and visual style settings from other model drawings that did not have this problem but came up with nothing that worked. More than one model drawing on this particular project created by another discipline has this problem, whereas on a previous project models by another discipline never had this problem and neither do models created within my dicipline.
View 0 Replies
View Related
Oct 9, 2010
1. when I edit or create text in a particualr drawing, I can't keep the editor from rotating 90 degrees.
I've tried creating a new style and it does the same thing both in model space and in Paper Space.
2. in a new drawing, the editor jumps out of drawing area on right side of drawing space by default.
View 7 Replies
View Related
Nov 8, 2011
How to position a Point Helper at the endpoint of the Taper Length in 3d space? I think it would extend the Taper in its use for rigging things. Have a look at the screenshot. I mean the magenta ones.
I know there is a mathematically way with vector analysis, but it's to long ago to script it fast. Or is there a helper which has the same capability?
View 8 Replies
View Related
Dec 30, 2013
I created multiple base views and projected views on drawing (autocad 2014). suddenly when I create base view it doesn't show anything, jumps to 0,0,0 coordinates (it is fixed can't be changed), scale can't be changed. It shows it is drawing view in properties, however when I want to edit (click edit then select the view , it won't recognize it is view). I created many views without problem, now all base views jumps to 0,0,0 coordinates....
(pic 1 )- shows the usless view
pic 2 - shows previous view without any issues
View 1 Replies
View Related
Apr 28, 2013
I was wondering the best way to draw a circle that passes through an endpoint of a line and then is tangent to another circle above it? I need to create a radius of 3.5 between the two points.
View 9 Replies
View Related
