AutoCad :: Mouse Jumps Up And Down And Hard To Control
Apr 13, 2012
We are using autocad 6 nad install it in new dell computer,windows xp, the mouse jumps up and down and hard to control, sometimes it moves by itself a leave a trail, fist time it happens.
I have Lightroom 4 running on Macbook Pro (mid 2010 with Mountain Lion), and it loses mouse control totally after a while.
Problems started when upgrading from 3.6 to 4.1 and upgrading to 4.2 did not work. Sometimes I might be able to use the software for hours, sometimes problems start just after ten minutes or so. Only restarting the software seems to work.
Lightroom is only program having this kind of problems, and problem stays same, no matter am I using external mouse or trackpad. Keyboard commands are working all the time and Lightroom seems to respond those normally, only mouse control is totally lost or acting randomly. If I use iPad with Air Display as second diplay, mouse seems to work there just fine even when window in MBP's display is having problems (I saw problem before installing Air Display).
I know most of us have 2 computers in our suites and would be nice to controll both computer without having to use 2 mice and 2 keyboards. Right now I am using 2 computers, a mac pro and a macbook pro. I would like to use my MacPro's keyboard and mouse to control the macbook pro much like a mouse and keyboard on a second display. I've been using an application called teleport, but it doesn't allow me to use keyboard commands.
I've heard/used synergy, but it's to much work for the final product.
I used to be able to control the sliders on my earlier Adobe Elements with my middle wheel on my mouse but on installing 12 version this does not seem to work any more, which is a great pity as it was so precise.
how to turn off the mouse function when the mouse cursor moves over a feature, such as an edge, point, or surface, and highlights it. I don't want it highlighting the features automatically. I want it to highlight once I click over a feature. My colleagues and I are very distraught by this feature, and will be discontinuing our use of your products that do not allow us to turn this feature off. I'm not sure why you'd want to weed your customer base like this, assuming that I can't turn this option off from the research I've done pouring through the hundreds of complaints related to this issue. I haven't been able to find any posts recently, or regarding Inventor 2013 specificially on this issue, so I was hoping this version had the option of turning it off. Does any of Autodesk's software, such as AutoCAD, have the option of turning it off?
Using AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
With osnap on endpoint only, no other dynamic inputs on, no polar, 3dobject snap dynamic input, grid or snap on.
The cursor looks like it jumps up form the endpoint but actually it moves in the same Z as the osnap. Also when i zoom in i can't move my cursor to the upper or lower part of the screen depending on where I zoom too. If I turn magnet off it seems better but still not correct. In the drawing I uploaded I can't move the cursor up to the entities. If I open a new drawing everything works, on a different drawing everything works. If I insert this into a new file I get the problems back.
All toggles are turned off and the cursor jumps all over the screen when zoomed in. Also, there are two rectangular boxes in the northeast quadrant of the crosshairs when moving near a point or node. How to eliminate this? All function keys are off.
I have several hard drives. Say D, E and F. I want to migrate or move the folders that are listed under each hard drive in my lightroom to say Hard Drive G. How do I do this so that all my keywords, and selects and color codes move with it? and that in lightroom G hard drive would be my only hard drive listed? I want to do this to get everything nice and orderly
The original model, in shade visual style, all objects are distinct and separate objects as they should be. However, when an xref is loaded (overlay) the model (display) jumps and the objects that were distinct now appear mingled together. Also, when you hover over an object it's highlight outline does not align with the object, it is offset from it approximately the amount of the display jump. I compared display and visual style settings from other model drawings that did not have this problem but came up with nothing that worked. More than one model drawing on this particular project created by another discipline has this problem, whereas on a previous project models by another discipline never had this problem and neither do models created within my dicipline.
I followed the tutorial on this page: [URL]. However, my animation auto plays and mousing over has no effect. I have searched and sreached to no understandable (to me) avail. Here's a link to the file: [URL]
I created multiple base views and projected views on drawing (autocad 2014). suddenly when I create base view it doesn't show anything, jumps to 0,0,0 coordinates (it is fixed can't be changed), scale can't be changed. It shows it is drawing view in properties, however when I want to edit (click edit then select the view , it won't recognize it is view). I created many views without problem, now all base views jumps to 0,0,0 coordinates....
I am not changing anything in my system. I am using windows 7 and will continue to. No change in elements version (10). how to move my pictures from my computer hard drive to an external hard drive (this will NOT be a back up) but the primary locaton for my pictures. I will keep elements program on my computer and when I want to work on my pictures or download more pictures from my camera I will connect to the external hard drive.
I shoot DNG in camera at 10.3mp. When opened in CC and I go to image size it is suddenly 58.9mp but only 11.9in by 9.6in in size. Why? I am looking to get a 16x20 print out of it with oul loss of image quality.
I've created a template and would like to import a PDF over the top of it. The problem is, when I import the PDF, the text jumps in the PDF as you can see below. As you can see the original file is on the right hand side.
Have CS4 on Windows XP. Wacom tablet and pen. Nvidia GEForce 7600GS video card.
Have updated Tablet drivers and Video card driver as of this am. (Fri Jan 16 09). Adobe updates seem to be having a bit of trouble coming through though. Virus program is AVG.
Healing brush only, when we alt click to set the selection point and then move to the area we want changed and drag the curser, the selection point glides along smoothly while the target hops along giving a series of altered spots with non-altered spots in between.
Clone brush and so on are fine.
Any ideas, past experiences? Or have I ventured into new territory?
Our company is migrating from CS1 to CS3 (finally!). We found a curious issue with the brush tool in Photoshop: in CS1, when you click near the edge of your open file window, it just draws to that point - and stops. That's it. In CS3, when you click near the edge of your open file window, it automatically jumps out / scrolls the window in the direction in which your line is traveling. Is there a way to disable this function?
Is it possible to have one line (or path) automatically create a jump or gap when it crosses another line (or path). I am trying to switch from using MS Visio to Illustrator, and this is a basic Visio feature as seen here [URL]....
I use Adobe Photoshop Elements Version 8.0, and I use Windows 7.
The problem: Whenever I use any tools involving the usage of the mouse on the canvas, everytime I click to use the tool, sometimes the cursor seems to 'jump' out of position and I end up unintentionally putting paint on the wrong part of the canvas. And before I release the click, I try to move the mouse around in random directions to no avail; the mouse doesn't respond until I release the mouse. In another similar case, sometimes for a split second the cursor seems to move on its own and it leaves behind a random trail of color. Example: Let's say I wrote down my name 'Andrew' on the canvas. I end up something similar to 'Anc e.", along with a black dot/calligraphic stroke or two unintentionally placed when writing down my name. I had to undo and click several times until I properly got the tool working. I'm working on a certain project in PS
I'm guessing a part of my bare hand is just barely in physical contact with the touchpad?
I'm currently using my created brush and when I try to use the basic brush, it immediately jumps back to my created brush with it's stroke size.
Align to pixel grid is turned off so it cant ber that.
I used to resolve this problem (when I was actually trying to keep using my created brush when it was reverting back to basic brush) but I would resolve it by double clicking on the designated brush in the brushes palette.
Also seeing as were on the subject of brushes, nop matter how I adjust the firmness/ pressure both in the driver setting of my wacom and for the brush in illustrator, I see no difference?
This is a weird one, but I am new to lightroom. I have these pins on my image, which are all grey, and when I click on them, they jump to another image. I can't seem to figure out what is happening here.. I think they were created when I add a graduated filter,,,
I cannot delete them because when I click on them they jump to a diffeferent image... It's super annoying trying to add graduated filters when you keep jumping to a different image...
i am redrawing an image and used guidelines to insure straight lines. the problem i am having is when i try to put a node on the intersecting lines, it jumps away from where i have placed it. i do not have any of the snap items turned on and am not using a grid in the background. Why will the nodes not go where they are being place? i have been using corel for years and have not had this problem before.