All toggles are turned off and the cursor jumps all over the screen when zoomed in. Also, there are two rectangular boxes in the northeast quadrant of the crosshairs when moving near a point or node. How to eliminate this? All function keys are off.
View 2 RepliesWith osnap on endpoint only, no other dynamic inputs on, no polar, 3dobject snap dynamic input, grid or snap on.
The cursor looks like it jumps up form the endpoint but actually it moves in the same Z as the osnap. Also when i zoom in i can't move my cursor to the upper or lower part of the screen depending on where I zoom too. If I turn magnet off it seems better but still not correct. In the drawing I uploaded I can't move the cursor up to the entities. If I open a new drawing everything works, on a different drawing everything works. If I insert this into a new file I get the problems back.
My cursor jumps every time when I single click on to hatch or use the hatch command it also does the same with text.
View 1 Replies View RelatedI use Adobe Photoshop Elements Version 8.0, and I use Windows 7.
The problem: Whenever I use any tools involving the usage of the mouse on the canvas, everytime I click to use the tool, sometimes the cursor seems to 'jump' out of position and I end up unintentionally putting paint on the wrong part of the canvas. And before I release the click, I try to move the mouse around in random directions to no avail; the mouse doesn't respond until I release the mouse. In another similar case, sometimes for a split second the cursor seems to move on its own and it leaves behind a random trail of color. Example: Let's say I wrote down my name 'Andrew' on the canvas. I end up something similar to 'Anc e.", along with a black dot/calligraphic stroke or two unintentionally placed when writing down my name. I had to undo and click several times until I properly got the tool working. I'm working on a certain project in PS
I'm guessing a part of my bare hand is just barely in physical contact with the touchpad?
I have a layer I'm resizing and is currently in Transform.When I beging to drag the layer to position while it is in resize the center reference point will jump to my mouse causing me to move the reference point outside of the tranform layer. Normally I would have to click on the reference point and drag it intentionally or hold CTRL and click in the transformed layer to set a reference point, but it since CS6 is had still remainded in CC.
This happens when I transform the layer (Ctrl+T) and then grab the layer to move. I have to put the reference point back to center via mouse or by the reference point on the menu bar up top. Then I can go back and drag my later where I need it to finish my transform.
Recently my cursurs have turned to crosshairs. I have deleted my preferences, I have set cursurs to full size brush tip, yet when I use the crop or marquis tool. all I get is the crosshars.
View 2 Replies View RelatedThe cursor in my CS4 has turned into three different "figures" in line. This makes the program almost impossible to use and I cannot fin a way to come back to the normal "cross" again.
View 8 Replies View RelatedThe layer is turned off but the table is still turned on!
I’m wondering how come the layer in which the table exist is turned off while the table is still turned one!
The screenshot and the file are attached.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I typically use the function keys to toggle osnap, polar, orthomode etc. on & off. Now what happens is that when I use any function key it changes the setting for the previous F-key press. It does this once, then reverts to normal behaviour. For example:
F3 Osnap On
F3 Osnap Off
F3 Osnap On
F10 Osnap Off
F10 Polar On
F10 Polar Off
F8 Polar On
F8 Ortho On
Is there any way to programmatically turn off specific status toggles from the status bar? I would like to switch off all of our users' DUCS toggle so they can't accidentally turn it on. They all have independent CUI files.
It's easy enough to switch off UCSDETECT at drawing startup, this only goes part way. It's so easy to switch it back on via the status toggles - hence the need to switch it off programmatically at drawing start.
What is the osmode bit that toggles off the running snaps... but leaves the underlying user running snaps settings un-effected?
View 4 Replies View RelatedWe are using autocad 6 nad install it in new dell computer,windows xp, the mouse jumps up and down and hard to control, sometimes it moves by itself a leave a trail, fist time it happens.
View 1 Replies View RelatedWhen I select a hatch in my dwg, the ribbon jumps to the hatch settings. Is there a way to make that just stay on the home tab?
View 2 Replies View RelatedThe original model, in shade visual style, all objects are distinct and separate objects as they should be. However, when an xref is loaded (overlay) the model (display) jumps and the objects that were distinct now appear mingled together. Also, when you hover over an object it's highlight outline does not align with the object, it is offset from it approximately the amount of the display jump. I compared display and visual style settings from other model drawings that did not have this problem but came up with nothing that worked. More than one model drawing on this particular project created by another discipline has this problem, whereas on a previous project models by another discipline never had this problem and neither do models created within my dicipline.
View 0 Replies View Related1. when I edit or create text in a particualr drawing, I can't keep the editor from rotating 90 degrees.
I've tried creating a new style and it does the same thing both in model space and in Paper Space.
2. in a new drawing, the editor jumps out of drawing area on right side of drawing space by default.
I created multiple base views and projected views on drawing (autocad 2014). suddenly when I create base view it doesn't show anything, jumps to 0,0,0 coordinates (it is fixed can't be changed), scale can't be changed. It shows it is drawing view in properties, however when I want to edit (click edit then select the view , it won't recognize it is view). I created many views without problem, now all base views jumps to 0,0,0 coordinates....
(pic 1 )- shows the usless view
pic 2 - shows previous view without any issues
My cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
I shoot DNG in camera at 10.3mp. When opened in CC and I go to image size it is suddenly 58.9mp but only 11.9in by 9.6in in size. Why? I am looking to get a 16x20 print out of it with oul loss of image quality.
View 1 Replies View RelatedI've created a template and would like to import a PDF over the top of it. The problem is, when I import the PDF, the text jumps in the PDF as you can see below. As you can see the original file is on the right hand side.
View 5 Replies View RelatedHave CS4 on Windows XP. Wacom tablet and pen. Nvidia GEForce 7600GS video card.
Have updated Tablet drivers and Video card driver as of this am. (Fri Jan 16 09). Adobe updates seem to be having a bit of trouble coming through though. Virus program is AVG.
Healing brush only, when we alt click to set the selection point and then move to the area we want changed and drag the curser, the selection point glides along smoothly while the target hops along giving a series of altered spots with non-altered spots in between.
Clone brush and so on are fine.
Any ideas, past experiences? Or have I ventured into new territory?
When trying to Edit/Playback imported .MP4 files it keeps jumping, it's fine when I use .MOD files
View 2 Replies View Relatedmy polygonal lasso keeps jumping to close before I'm done and before I double click. Is there a way to make it less sensitive? What's wrong?
It seems that the more I use it the quicker it jumps to close.
Our company is migrating from CS1 to CS3 (finally!). We found a curious issue with the brush tool in Photoshop: in CS1, when you click near the edge of your open file window, it just draws to that point - and stops. That's it. In CS3, when you click near the edge of your open file window, it automatically jumps out / scrolls the window in the direction in which your line is traveling. Is there a way to disable this function?
View 2 Replies View RelatedThe exposure slider in camera raw always jumps back or forward to the nearly next full f-stop if I choose another slider!
View 1 Replies View RelatedWhen I move objects across layers, the the screen "jumps" or "jitters". Could this be related to the refresh rate? Maybe it is my monitor?
View 1 Replies View RelatedIs it possible to have one line (or path) automatically create a jump or gap when it crosses another line (or path). I am trying to switch from using MS Visio to Illustrator, and this is a basic Visio feature as seen here [URL]....
View 4 Replies View RelatedI'm currently using my created brush and when I try to use the basic brush, it immediately jumps back to my created brush with it's stroke size.
Align to pixel grid is turned off so it cant ber that.
I used to resolve this problem (when I was actually trying to keep using my created brush when it was reverting back to basic brush) but I would resolve it by double clicking on the designated brush in the brushes palette.
Also seeing as were on the subject of brushes, nop matter how I adjust the firmness/ pressure both in the driver setting of my wacom and for the brush in illustrator, I see no difference?
This is a weird one, but I am new to lightroom. I have these pins on my image, which are all grey, and when I click on them, they jump to another image. I can't seem to figure out what is happening here.. I think they were created when I add a graduated filter,,,
I cannot delete them because when I click on them they jump to a diffeferent image... It's super annoying trying to add graduated filters when you keep jumping to a different image...
In Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
i am redrawing an image and used guidelines to insure straight lines. the problem i am having is when i try to put a node on the intersecting lines, it jumps away from where i have placed it. i do not have any of the snap items turned on and am not using a grid in the background. Why will the nodes not go where they are being place? i have been using corel for years and have not had this problem before.
View 8 Replies View Relatedtest.cdr
Bug in this file. Click the text in the dimensions. It jumps up a line.