Recently my cursurs have turned to crosshairs. I have deleted my preferences, I have set cursurs to full size brush tip, yet when I use the crop or marquis tool. all I get is the crosshars.
View 2 RepliesI recently installed AutoCAD 2012 and have noticed that my crosshairs are moving as if a grid is turned on. I checked my settings and have turned everything off however, the crosshairs continues to move in "jerk-like" movements.
How do I change this?
In CS5, is there a way to hide the cursor/ crosshairs while drawing? Since I'm working on a Cintiq I don't need visual reference of where my cursor is - it's where my pen is - and it actually annoys me to have this crosshair cursor in the way of what I'm doing. Ofcourse it's no problem to have a cursor for selecting tools or menus - it's only while drawing that it would be preferable to have a clean working area under the pentip.
View 5 Replies View RelatedOne of my co-worker has this problem with his cursor's crosshairs. When he moves his cursor the crosshairs are like blinking or sort of flashing. It's not that big of a problem but it's just getting anoying in a short while.
View 9 Replies View RelatedThe cursor in my CS4 has turned into three different "figures" in line. This makes the program almost impossible to use and I cannot fin a way to come back to the normal "cross" again.
View 8 Replies View RelatedAll toggles are turned off and the cursor jumps all over the screen when zoomed in. Also, there are two rectangular boxes in the northeast quadrant of the crosshairs when moving near a point or node. How to eliminate this? All function keys are off.
View 2 Replies View RelatedThe layer is turned off but the table is still turned on!
I’m wondering how come the layer in which the table exist is turned off while the table is still turned one!
The screenshot and the file are attached.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I have trouble seeing the crosshairs on my screen.
Is there anyway for me to make them larger so i don't have to strain to see them?
I'm using PSE 11. When I select the Crop tool, the crop symbol is a dot with cross hairs on the outside. How do I change the crop symbol to the traditional crop symbol?
View 8 Replies View RelatedThe eraser tool will only appear as small crosshairs no matter what I try.
View 1 Replies View RelatedMy cursor appears and disappears while in GIMP as I move the cursor over the canvas. I can make the cursor appear but only if there is no movement of the cursor. It makes no difference which tool I select, the size of the canvas, or the level of zoom.
Please note that this only occurs in Gimp, and none of my other applications. It started when I upgraded from openSUSE 12.1 to 12.2. I'm assuming that it has something to do with my input device configuration, but I could be totally wrong.
I have a total of 3 input devices - Core Pointer, Logitech USB-PS/2 Optical Mouse, and Virtual Core XTEST Pointer. Both the Optical Mouse and XTEST Pointer are DISABLED. Core Pointer is the only one enabled. Enabling Optical Mouse and XTEST Pointer give me other problems in Gimp and need to remain disabled.
For the Core Pointer, Mode is set to SCREEN, a message says that 'The axis X has no curve', and the following Axis Settings:
X 1
Y 2
Pressure none
xtilt none
ytilt none
wheel none
In Gimp Preferences->Input Controllers, there are three active controllers - Mouse Buttons, Main Mouse Wheel, and Main Keyboard.
OS: Linux 3.4.11-2.16-desktop i686
System: openSUSE 12.2 (i586)
KDE: 4.8.5 (4.8.5) "release 2"
Display Info:
Vendor: Intel Corporation
Model: G33
2D driver: intel
3D driver: Unknown Gallium (9.0.1)
I have work to do on a bathroom group that is rotated at 18 degrees. How do I rotate my crosshairs to make this easer to work on?
View 4 Replies View RelatedI was drafting away, and all of a sudden my crosshairs and pickbox disappeared. Once I move the mouse there's nothing in my drawing plane. I can type commands, and when I move the mouse up to the menu area I can pull down menus. I've opened up other drawings and the crosshairs and pick box are there.
What can I do to resolve this? Of course it happens during a deadline.
Using Autocad version 2009, windows 2007, Professional
I opened a multi-tab CAD document, and my crosshairs disappear when I go into a viewport from paperspace. I can still select things, but I can't see what I'm selecting because the crosshairs are gone! The viewports in the other tabs are fine, I can see my crosshairs in those. I've looked for some setting that accidentally got changed, but can't figure it out. I'm running AutoCAD 2010.
View 9 Replies View RelatedMy crosshairs are not moving smoothly in my workspace. They are jumping big spaces. I typed "snap" and click "OFF" but it had not effect. I can't click on objects.. or draw from.. my mouse moves smoothly in every other application of my computer..just not in CAD workspace.
View 9 Replies View RelatedIn AutoCad 2012 I have a large drawing with 30000 entities in it. Most times (althoguh not always), after saving, the crosshairs then vanish and I have to exit the drawing and open it again to get them back.
It doesn't happen in all drawing files, as far as I can tell it is just this large one.
I have recently been fighting an override of some sort that doesn't want to go away. As an example, for basic copy command, I would normally select my object to copy, type C, hit the space bar, and select my object again to copy to new location. With this override, I select my object, type C, hit the space bar, and in the command line, this appears:
Command: c COPY 1 found
Current Settings: Copy mode = Multiple
Specify base point or [Displacement/mOde] : c
when working at this workstation, the crosshair gets very 'Jumpy' and slow as it gets near or cross over a dimension line. is there possibly a setting that is on or off that is causing this. It has nothing to do with the file. It happens on any file on this computer, but if i switch to a different workstation all is well. And this is a much faster workstation than the other. The issue also happens to a much lesser extent when crossing any drawing object. The cursor (crosshairs) will pause slightly. It is a very long pause when near the dim lines though. it is almost impossible to select or snap to an object or line if it is near a dimension line.
View 9 Replies View RelatedI am working with files from an architect and when I open a file with xrefs they all have these big crosshair/boxes all over them. I can choos edit in [lace and delete the crosshairs but there are a lot of xrefs and it will take for ever. They are not on the original drawings that I can see. One with crosshairs and one without.
View 2 Replies View RelatedI have a co-worker that wants to rotate the UCS ICON and the CROSSHAIRS in model space but not the actual view on the screen. On my machine this is what it does when I use the UCS command. On their machine it rotates everything. Is there a "variable" that controls this?
View 3 Replies View RelatedI work on a mac and run parallels for autocad. My issue is while working the autocad the crosshairs drag behind my hand movement. when the pointer is moving thru menus it works fine and when i go back to the work space the crosshairs drag behind.
View 5 Replies View RelatedMoments ago my crosshairs in the model space decided to rotate. I tried to undo, but apparently the damage is done.
I came across a thread on another website about trying UCS, world & plan etc which I tried.
While this did rotate my crosshairs to be straight and normal again, it rotated all of my drawings I have numerous sections on the page and unfortunately they all became rotated.
Is there a way to rotate the crosshairs and not change my drawing?
In Xcode, we have to define cursor as:
resource 'CURS' (16001) {
$"00 00 00 00"
$"18 00 3C 00"
$"1E 00 0F 00"
$"07 80 03 C8"
$"01 E8 00 FC"
[Code]...
In Windows we use .cur file, simpler.
I want to convert .cur file to the mac format above, how?
why my crosshairs stutter after I select an object? I first noticed it after the AutoCAD release that added vertex control options to plines. Crosshairs hang for a second or two after selecting an object that has vertices. Seems like CAD is evaluating the vertices.
View 4 Replies View RelatedWe have just installed ACA 2012 on one of our workstations and randomly the crosshairs will disapear in paperspace. We will still get the cursor icon if we hover over properties and paletts etc. We have the latest service pack and ribbon hotfix. Searching hasn't come up with much.
View 4 Replies View RelatedWhen I open ACAD A14, the workspace is displayed black (I had it set on white). When I zoom out, the screen is white again, but when I move the cursor, the crosshairs are displayed as a black square and leave a black trail, like for example Internet Explorer on the old Windows systems. I can use all functions normally, however my drawings are not properly displayed through the black. I had it running today already, without any problems, but my laptop was not connected to the internet, now it is. Things I tried: Reinstalling AutoCAD Restarting my PC Disconnecting my laptop from the internet and reopening AutoCAD A screenshot is attached. I am a first semester student and the plan is for a supporting structure of a hall that is due on friday, so its nothing that takes up a lot of computing power or anything.
View 1 Replies View RelatedOn occasion when on a layout tab and making a few changes in model space and I preview while model space is still active, crosshairs disappear when I exit preview. So I then save, close and reopen, it is then back to normal.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
When I insert a X-ref overlay, everything seems to work, but giant cross hairs with a circles appear dotted all around on the X-refed drawing, similar to spot levels (minus the hatch).
Attached an image X-ref image.jpg
How to stop this or why it seems to be scaling up the crosshairs .
I am using an ati 6950. (yes i know its not a suggested card) but it runs great other than after 20minutes to an hour worth of use it will freak out when you hover over an object and that object turns to dashed lines. The crosst hair will turn into like 50 diagonal lines and start smearing on the screen. I went in and changed to options from DASH to THICKEN on hover. This has been working for about an hour now.
View 3 Replies View RelatedI have a large drawing with 5 meter contours that are 2D polylines on elevation. In Civil 3D 2012, when the crosshairs touch a polyline the drawing hangs for quite awhile. I've cut a piece out of the drawing so it is 28mb instead of 121mb and now the hang time is much less but it still does it. It does not happen in AutoCAD 2012.
Windows 7 x 64
Intel i7-4770 CPu @ 3.40 GHz
24 GB RAM
NVIDIA Quadro K2000D
Civil 3D 2014 (i.108.0.4, SP1)
In a drawing, the directions aren't pointing at a 90-degree angle with relation to the command ribbon above it. It's rotated a little clockwise, as are the crosshairs. How do I get the crosshairs and viewcube to be parallel with the command ribbon? I don't need to rotate any objects in the drawing, but I think this is messing up what I see in my viewports in the layouts.
View 9 Replies View Related